summaryrefslogtreecommitdiffstats
path: root/video/out/gl_video.c
Commit message (Collapse)AuthorAgeFilesLines
* vo_opengl: add smoothmotion frame blendingStefano Pigozzi2015-01-231-7/+132
| | | | | | | | | | | | | | | | | | | SmoothMotion is a way to time and blend frames made popular by MadVR. It's intended behaviour is to remove stuttering caused by mismatches between the display refresh rate and the video fps, while preserving the video's original artistic qualities (no soap opera effect). It's supposed to make 24fps video playback on 60hz monitors as close as possible to a 24hz monitor. Instead of drawing a frame once once it's pts has passed the vsync time, we redraw at the display refresh rate, and if we detect the vsync is between two frames we interpolated them (depending on their position relative to the vsync). We actually interpolate as few frames as possible to avoid a blur effect as much as possible. For example, if we were to play back a 1fps video on a 60hz monitor, we would blend at most on 1 vsync for each frame (while the other 59 vsyncs would be rendered as is). Frame interpolation is always done before scaling and in linear light when possible (an ICC profile is used, or :srgb is used).
* vo_opengl: improve terminal messages with lscale suboption errorswm42015-01-221-5/+13
| | | | Make it more apparent what the hell the user did wrong.
* vo_opengl: remove scale-sep and indirect optionsNiklas Haas2015-01-221-14/+12
| | | | | | | | | | | | These are now auto-detected sanely; and enabled whenever it would be a performance or quality gain (which is pretty much everything except bilinear/bilinear scaling). Perhaps notably, with the absence of scale_sep, there's no more way to use convolution filters on hardware without FBOs, but I don't think there's hardware in existence that doesn't have FBOs but is still fast enough to run the fallback (slow) 2D convolution filters, so I don't think it's a net loss.
* vo_opengl: rename all scale options to make more senseNiklas Haas2015-01-221-16/+28
| | | | | This emphasizes the fact that scale is used for *all* image upscaling, with cscale only serving a minor role for subsampled material.
* vo_opengl: switch to nearest neighbour for trivial resamplingNiklas Haas2015-01-221-2/+11
| | | | | | | | | | This is significantly faster for FBOs on most modern GPUs, although it did not result in a huge difference for the video source texture on the sizes I tested. It might be more significant for 1080p or 4K content, so it's worth revisiting this in the future. It also renames SAMPLE_BILINEAR to SAMPLE_TRIVIAL to match the semantics.
* vo_opengl: always prefer indirect scalingNiklas Haas2015-01-221-14/+5
| | | | | | This is better even for non-separable. The only exception is when using bilinear for both lscale and cscale. I've fixed the documentation/comments to make more sense.
* vo_opengl: implement naive anti-ringingNiklas Haas2015-01-221-4/+14
| | | | | | | | This is not quite the same thing as madVR's antiringing algorithm, but it essentially does something similar. Porting madVR's approach to elliptic coordinates will take some amount of thought.
* vo_opengl: unroll ewa_lanczos to avoid looping and unnecessary samplesNiklas Haas2015-01-221-2/+22
| | | | | | | This speeds up performance by a factor of something like 10%, since it omits unnecessary checks. This will also make adding anti-ringing easier.
* vo_opengl: clean up ewa_lanczos codeNiklas Haas2015-01-221-16/+42
| | | | | | This fixes compatibility with GLES 2.0 and makes the code a bit neater in general. It also properly forces indirect scaling for subsampled video regardless of the lscale setting.
* vo_opengl: guarantee correct reinitialization on setting optionswm42015-01-221-0/+1
| | | | | | At least the scale_sep_fbo could have been uninitialized or initialized incorrectly when switching between scalers (e.g. from bilinear to lanczos). Calling check_resize() should take care of this.
* vo_opengl: don't reset unused GL_PACK_... statewm42015-01-221-4/+1
|
* vo_opengl: simplify screenshot codewm42015-01-221-49/+13
| | | | | | | | | | | | | | Instead of reading back the image from textures, keep a reference to the original image, and return that. The main reason this was done this way was that originally, images weren't refcounted, and would be deallocated or overwritten as soon as the VO's draw call returned. But now there isn't really a good reason for this anymore. One possibly _could_ argue that it was better because other code could reuse the image sooner (e.g. for the cache), but on the other hand, the VO runs already on a different thread, and filtering and decoding each run on other threads too, so this argument probably wouldn't hold up.
* video: handle hwdec screenshots differentlywm42015-01-221-9/+7
| | | | | | | | Instead of converting the hw surface to an image in the VO, provide a generic way to convet hw surfaces, and use this in the screenshot code. It's all relatively straightforward, except vdpau is being terrible. It needs a huge chunk of new code, because copying back is not simple.
* vo_opengl: make the default radius 3.0 and simplify scaler documentationNiklas Haas2015-01-211-2/+2
| | | | | | | This also fixes the maximum range to 16.0, which was previously set to 32.0 and incorrectly documented as 8.0. 16 taps should be more than anybody will ever need, but it's the highest radius that's supported by all affected filters.
* vo_opengl: cleanups after vo_opengl_old removalwm42015-01-211-2/+2
| | | | | | | | | | | | | Don't load all the legacy functions (including ancient extensions). Slightly simplify function loader and context creation, now that legacy GL doesn't need to be handled. Remove the code for drawing OSD in legacy mode. Remove all the header hacks, which were meant for ancient OpenGL headers which didn't even support things like OpenGL 1.3. Instead, adjust the GLX check to make sure we get both OpenGL 3x and 2.1 symbols. For win32 and OSX, we assume that the user has the latest headers anyway. For wayland, we hope that things somehow go right.
* vo_opengl: handle grayscale input better, add YA16 supportwm42015-01-211-12/+10
| | | | | | | | | | Simply clamp off the U/V components in the colormatrix, instead of doing something special in the shader. Also, since YA8/YA16 gave a plane_bits value of 16/32, and a colormatrix calculation overflowed with 32, add a component_bits field to the image format descriptor, which for YA8/YA16 returns 8/16 (the wrong value had no bad consequences otherwise).
* vo_opengl: remove cscale-down suboptionwm42015-01-201-5/+5
| | | | For an explanation see the additions to the manpage.
* vo_opengl: remove 1D texture usagewm42015-01-181-32/+14
| | | | | | | Broke operation with GLSL. Since 1D texture usage was apparently (and mysteriously) good for speed, it might be added back, but it's unknown how to do so in a clean way.
* vo_opengl: get rid of approx-gamma and make it the default as per BT.1886Niklas Haas2015-01-161-25/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | After finding out more about how video mastering is done in the real world it dawned upon me why the "hack" we figured out in #534 looks so much better. Since mastering studios have historically been using only CRTs, the practice adopted for backwards compatibility was to simulate CRT responses even on modern digital monitors, a practice so ubiquitous that the ITU-R formalized it in R-Rec BT.1886 to be precisely gamma 2.40. As such, we finally have enough proof to get rid of the option altogether and just always do that. The value 1.961 is a rounded version of my experimentally obtained approximation of the BT.709 curve, which resulted in a value of around 1.9610336. This is the closest average match to the source brightness while preserving the nonlinear response of the BT.1886 ideal monitor. For playback in dark environments, it's expected that the gamma shift should be reproduced by a user controlled setting, up to a maximum of 1.224 (2.4/1.961) for a pitch black environment. More information: https://developer.apple.com/library/mac/technotes/tn2257/_index.html
* vo_opengl: add ewa_lanczos upscaler (aka jinc)Niklas Haas2015-01-151-29/+56
| | | | | This is the polar (elliptic weighted average) version of lanczos. This introduces a general new form of polar filters.
* video: Add sigmoidal upscaling to avoid ringing artifactsNiklas Haas2015-01-091-1/+42
| | | | | | | | | This avoids issues when upscaling directly in linear light, and is the recommended way to upscale images according to imagemagick. The default slope of 6.5 offers a reasonable compromise between ringing artifacts eliminated and ringing artifacts introduced by sigmoid-upscaling. Same goes for the default center of 0.75.
* gl_video.c: invalidate image_params in uninit_video()xylosper2015-01-071-0/+4
| | | | | | | | | | | | | When the given mp_image_params does not match with that of gl_video, gl_video_config() always calls uninit_video() but calls init_video() only if valid format is given. Since uninit_video() does not change image_params of gl_video, when the same params as the previous one is given to gl_video_config() after gl_video is unitialized with invalid format, gl_video_config() never calls init_video(). To prevent this, invalidate image_params of gl_video in uninit_video().
* video: Remove some stale CMS code, minor cosmeticsNiklas Haas2015-01-071-4/+1
| | | | This removes an old code path that was disabled in 016bb14.
* vo_opengl_cb: implement equalizer controlswm42015-01-061-13/+10
| | | | | | | | | | | | | | | | This makes vo_opengl_cb respond to controls like "gamma" and "brightness". The commit includes an awkward refactor for vo_opengl to make it easier for vo_opengl_cb. One problem is a logical race condition. The set of supported controls depends on the pixelformat, which in turn is set by reconfig(). But the actual reconfig() call (on the renderer) happens asynchronously on the renderer thread. At the time it happens, the player most likely already tried to set some controls for command line options (see init_vo() in video.c). So setting this command line options will fail most of the time, though it could randomly succeed. This can't be fixed directly, because the player can't wait on the renderer thread, because the renderer thread might already wait on the player.
* csputils: replace float[3][4] with a structwm42015-01-061-10/+6
| | | | | Not being able to use the 3x3 part of the matrix was annoying, so split it into a float[3][3] matrix and a separate float[3] constant vector.
* csputils: move image_params -> csp_params into a functionwm42015-01-061-7/+4
| | | | | | | | | Although the line count increases, this is better for making sure everything is handled consistently for all users of the mp_csp_params stuff. This also makes sure mp_csp_params is always initialized with MP_CSP_PARAMS_DEFAULTS (for consistency).
* csputils: get rid of mp_csp_detailswm42015-01-061-7/+4
| | | | It used to be central, but now it's just unneeded.
* vo_opengl: Ignore approx-gamma for BT.2020-CLNiklas Haas2014-12-291-2/+9
| | | | | | The details of the non-linear transformation from/to BT.2020's constant luminance system don't really make sense with any other gamma curve, since changing the gamma curve completely breaks the chroma channels.
* vo_opengl: don't use 10 bit video on Intel GPUswm42014-12-241-0/+30
| | | | | | | | | | | | vo_opengl was originally written against OpenGL 3 core, and it seems GPUs/drivers supporting this are mostly sane. Later, it was made to work with OpenGL 2.1 too. Lately we removed the requirement for RG textures, and look, someone reported a problem with "lesser" Intel GPUs. This commit does the same in vo_opengl what was added to vo_opengl_old a long time ago. Fixes #1383.
* vo_opengl_cb: always setup/break vertex array bindingswm42014-12-231-3/+13
| | | | | | | | | | | Originally, this code was written to have full control over the OpenGL state, rather than having to cooperate with unknown components by being embeded like vo_opengl_cb is meant to be. As a consequence, it was thought to be ok to setup a global binding (if the context is below OpenGL 3.0, which guarantees VAOs). This could break badly. Fix it by setting up and breaking the bindings on entry/exit.
* vo_opengl: don't allow setting 3D LUT if unsupportedwm42014-12-231-1/+5
| | | | | The code was always uploading the 3D LUT (even of unused), as long as vo_opengl was setting a icc-profile. This could crash with GLES 2.
* vo_opengl: make use of newer OpenGL logging APIwm42014-12-231-1/+35
| | | | | | GL_ARB_debug_output provides a logging callback, which can be used to diagnose problems etc. in case the driver supports it. It's enabled only if the vo_opengl "debug" suboption is set.
* vo_opengl, vo_opengl_cb: check GL version in rendererwm42014-12-221-0/+5
| | | | | | vo_opengl actually checks this in the context creation code already, but it still increases robustness in case the requirements are changed later.
* vo_opengl: fix feature detectionwm42014-12-221-1/+1
| | | | Fixes #1373.
* vo_opengl: improve fallback handling with GLESwm42014-12-211-7/+21
| | | | | | | | | Whether we have texture_rg doesn't matter much anymore; the scaler should be fine with this. But on ES 2.0, 1st class arrays are missing, so even if filterable float textures should be available, it won't work. Dithering (at least the "fruit" variant) will not work either, because it uses floats.
* vo_opengl: silence an INVALID_ENUM error with GLES2James Ross-Gowan2014-12-211-1/+2
| | | | Signed-off-by: wm4 <wm4@nowhere>
* vo_opengl: GLES does not support GL_BGRAwm42014-12-201-1/+1
| | | | | | | | | | | | | Apparently GLES 2 and 3 do not support this. (The implementations I tested with were derived from desktop OpenGL and were not overly strict with this.) This is no problem; just use GL_RGBA and mangle the channels in the shader. Also disable direct support for image formats like IMGFMT_RGB555 with GLES; at least some of them are not supported in this form, and the formats aren't important anyway.
* vo_opengl_old: fix OSD regressionwm42014-12-201-1/+1
| | | | | | | | | | | | | | | | | Commit 0e8fbdbd removed the rg_texture requirement from vo_opengl; commit 541f6731 changed to a more convenient method. Both commits broke vo_opengl_old in some ways. vo_opengl_old always requires GL_ALPHA for single-channel texture, because it draws the OSD without shaders and by using certain blend modes. So we need to explicitly distinguish between vo_opengl and vo_opengl_old in the OSD renderer, and force fixed texture formats for vo_opengl_old. The other logic is specific to the internals of vo_opengl. (Although it might be possible to get the same result by playing with the old GL fixed-function functions in vo_opengl_old. But seems like a waste of time.) Fixes #1370.
* vo_opengl: minor simplificationwm42014-12-191-5/+5
| | | | The parameter to default_tex_params() is always the same.
* vo_opengl: add GLES 2 supportwm42014-12-191-3/+17
| | | | | | | | Rather basic support. Almost nothing works, and even if it does, it's bound to be inefficient (due to texture upload). This was tested with the nVidia desktop binary drivers, which provide GLES 2 support only. However, nVidia is not known to be very strict about OpenGL, and the driver is very new too, so the vo_opengl code will have bugs too.
* vo_opengl: mess with PixelStorei state managementwm42014-12-191-13/+8
| | | | | | | | | | | | | | | | This is needed for GLES 2 support. GLES 2 doesn't support GL_UNPACK_ROW_LENGTH, and we shouldn't even use this constant, since a GLES implementation could raise an error. So set it only if neccessary, and leave it in the default state otherwise. This also smuggles in a ES 2 fallback for glUploadTex(), and querying an extension relevant for ES 2. For the alignment state (GL_[UN]PACK_ALIGNMENT) do the same for symmetry. All 4 states (alignment/rows x pack/unpack) are now assumed to be in their initial states by default. Also redo the PixelStorei handling in the function table. I could rebase this, but look at the commit time.
* vo_opengl: disable some unavailable features under ESwm42014-12-191-2/+5
| | | | There are probably many more which I overlooked.
* vo_opengl: do not use 4x3 matrixwm42014-12-181-1/+8
| | | | | | | | | | | This was a nice trick to get the mpv colormatrix directly into OpenGL, because the memory representation happened to match. Unfortunately, OpenGL ES 2 doesn't have glUniformMatrix4x3fv(). Even more unfortunately, the memory representation is now incompatible. It would be nice to change it, but that would mean getting into a big mess.
* vo_opengl: simplify the case without texture_rgwm42014-12-181-17/+9
| | | | | | | | | | | | If GL_RED was not available, we used GL_ALPHA. But this is an unnecessary complication, and it's easier to use GL_LUMINANCE instead. With the latter, a texture will return the .r component set, and as long as the shader doesn't look at the other components, the shader doesn't need any changes. Some of the changes added in 0e8fbdbd are now unneeeded. Also, realign the entire gl_byte_formats_legacy table.
* vo_opengl: GLES 3 supportwm42014-12-171-4/+35
| | | | | | | | | | | | Tested with MESA on software emulation. Seems to work well, although the default FBO format in opengl-hq disables most interesting features. I have no idea how well it will work on real hardware (or if it does at all). Unfortunately, some features, including playback of 10 bit video, are not supported. Not sure what to do about this. GLES 2 or 1 do not work.
* vo_opengl: remove useless FBO testwm42014-12-171-34/+2
| | | | | | | | | Remove the readback stuff; it was a useless mess. Don't test GL_R16 as FBO. The intention was to measure the effective bitdepth of the texture, except that it was never actually done. (There's also a OpenGL function which is supposed to retrieve the bitdepth, but we don't use that either.)
* vo_opengl: cleanup dither texture creationwm42014-12-171-4/+9
| | | | Might be slightly more compatible too, and will make it work on GLES.
* vo_opengl: switch default FBO format to rgba, use GL_RGBAwm42014-12-171-3/+6
| | | | | | | | | | I'm hoping this is generally more compatible, and it works with GLES. This probably has not much of an effect on desktop GL. It also switches only the default format for --vo=opengl, not --vo=opengl-hq. "-hq" already uses GL_RGBA16, though since it's a sized format, the story is a bit different, and it won't work on GLES either.
* vo_opengl: remove requirement for RG textureswm42014-12-161-27/+66
| | | | | Features not supported are disabled (although with a misleading error message).
* vo_opengl: remove inactive codewm42014-12-161-1/+0
|
* vo_opengl: fix broken rejection of extended scalingwm42014-12-161-3/+2
| | | | | Possibly explains why some users got mysterious FBO errors on crappy hardware.
* vo_opengl: remove quadbuffer/anaglyph stereo 3D renderingwm42014-12-151-37/+5
| | | | | | | | Obscure feature, and I've never heard of anyone using it. The anaglyph effects can be reproduced with vf_stereo3d. The only thing that can't be reproduced with it is "quadbuffer", which requires special and expensive hardware.
* vo_opengl: make shader text output slightly nicerwm42014-12-091-2/+2
| | | | It was missing an indentation in some cases.
* vo_opengl_cb: simplify reconfigure, render transparent if unconfiguredwm42014-12-091-1/+2
| | | | | | | I think that's expected; mpv shouldn't draw anything while no video is active. This doesn't blend transparently, though. Also document the vo_opengl_cb thing.
* vo_opengl: make background color configurablewm42014-12-091-3/+8
| | | | | This mainly affects the black bars that are drawn if the window and video aspect ratios mismatch.
* client API: expose OpenGL rendererwm42014-12-091-3/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds API to libmpv that lets host applications use the mpv opengl renderer. This is a more flexible (and possibly more portable) option to foreign window embedding (via --wid). This assumes that methods like context sharing and multithreaded OpenGL rendering are infeasible, and that a way is needed to integrate it with an application that uses a single thread to render everything. Add an example that does this with QtQuick/qml. The example is relatively lazy, but still shows how relatively simple the integration is. The FBO indirection could probably be avoided, but would require more work (and would probably lead to worse QtQuick integration, because it would have to ignore transformations like rotation). Because this makes mpv directly use the host application's OpenGL context, there is no platform specific code involved in mpv, except for hw decoding interop. main.qml is derived from some Qt example. The following things are still missing: - a way to do better video timing - expose GL renderer options, allow changing them at runtime - support for color equalizer controls - support for screenshots
* vo_opengl: enable fancy-downscaling for opengl-hq againwm42014-12-081-1/+1
| | | | | | I guess most problems with it have been fixed. It's still slower than necessary, though.
*