diff options
Diffstat (limited to 'DOCS/man/options.rst')
| -rw-r--r-- | DOCS/man/options.rst | 185 |
1 files changed, 0 insertions, 185 deletions
diff --git a/DOCS/man/options.rst b/DOCS/man/options.rst index b7ffda9a8c..657235c161 100644 --- a/DOCS/man/options.rst +++ b/DOCS/man/options.rst @@ -3657,191 +3657,6 @@ Terminal ``--msg-time`` Prepend timing information to each console message. - -TV --- - -``--tv-...`` - These options tune various properties of the TV capture module. For - watching TV with mpv, use ``tv://`` or ``tv://<channel_number>`` or - even ``tv://<channel_name>`` (see option ``tv-channels`` for ``channel_name`` - below) as a media URL. You can also use ``tv:///<input_id>`` to start - watching a video from a composite or S-Video input (see option ``input`` for - details). - -``--tv-device=<value>`` - Specify TV device (default: ``/dev/video0``). - -``--tv-channel=<value>`` - Set tuner to <value> channel. - -``--no-tv-audio`` - no sound - -``--tv-automute=<0-255> (v4l and v4l2 only)`` - If signal strength reported by device is less than this value, audio - and video will be muted. In most cases automute=100 will be enough. - Default is 0 (automute disabled). - -``--tv-driver=<value>`` - See ``--tv=driver=help`` for a list of compiled-in TV input drivers. - available: dummy, v4l2 (default: autodetect) - -``--tv-input=<value>`` - Specify input (default: 0 (TV), see console output for available - inputs). - -``--tv-freq=<value>`` - Specify the frequency to set the tuner to (e.g. 511.250). Not - compatible with the channels parameter. - -``--tv-outfmt=<value>`` - Specify the output format of the tuner with a preset value supported - by the V4L driver (YV12, UYVY, YUY2, I420) or an arbitrary format given - as hex value. - -``--tv-width=<value>`` - output window width - -``--tv-height=<value>`` - output window height - -``--tv-fps=<value>`` - framerate at which to capture video (frames per second) - -``--tv-buffersize=<value>`` - maximum size of the capture buffer in megabytes (default: dynamical) - -``--tv-norm=<value>`` - See the console output for a list of all available norms. - - See also: ``--tv-normid``. - -``--tv-normid=<value> (v4l2 only)`` - Sets the TV norm to the given numeric ID. The TV norm depends on the - capture card. See the console output for a list of available TV norms. - -``--tv-chanlist=<value>`` - available: argentina, australia, china-bcast, europe-east, - europe-west, france, ireland, italy, japan-bcast, japan-cable, - newzealand, russia, southafrica, us-bcast, us-cable, us-cable-hrc - -``--tv-channels=<chan>-<name>[=<norm>],<chan>-<name>[=<norm>],...`` - Set names for channels. - - .. note:: - - If <chan> is an integer greater than 1000, it will be treated as - frequency (in kHz) rather than channel name from frequency table. - Use _ for spaces in names (or play with quoting ;-) ). The channel - names will then be written using OSD, and the input commands - ``tv_step_channel``, ``tv_set_channel`` and ``tv_last_channel`` - will be usable for a remote control. Not compatible with - the ``frequency`` parameter. - - .. note:: - - The channel number will then be the position in the 'channels' - list, beginning with 1. - - .. admonition:: Examples - - ``tv://1``, ``tv://TV1``, ``tv_set_channel 1``, - ``tv_set_channel TV1`` - -``--tv-[brightness|contrast|hue|saturation]=<-100-100>`` - Set the image equalizer on the card. - -``--tv-audiorate=<value>`` - Set input audio sample rate. - -``--tv-forceaudio`` - Capture audio even if there are no audio sources reported by v4l. - -``--tv-alsa`` - Capture from ALSA. - -``--tv-amode=<0-3>`` - Choose an audio mode: - - :0: mono - :1: stereo - :2: language 1 - :3: language 2 - -``--tv-forcechan=<1-2>`` - By default, the count of recorded audio channels is determined - automatically by querying the audio mode from the TV card. This option - allows forcing stereo/mono recording regardless of the amode option - and the values returned by v4l. This can be used for troubleshooting - when the TV card is unable to report the current audio mode. - -``--tv-adevice=<value>`` - Set an audio device. <value> should be ``/dev/xxx`` for OSS and a - hardware ID for ALSA. You must replace any ':' by a '.' in the - hardware ID for ALSA. - -``--tv-audioid=<value>`` - Choose an audio output of the capture card, if it has more than one. - -``--tv-[volume|bass|treble|balance]=<0-100>`` - These options set parameters of the mixer on the video capture card. - They will have no effect, if your card does not have one. For v4l2 50 - maps to the default value of the control, as reported by the driver. - -``--tv-gain=<0-100>`` - Set gain control for video devices (usually webcams) to the desired - value and switch off automatic control. A value of 0 enables automatic - control. If this option is omitted, gain control will not be modified. - -``--tv-immediatemode=<bool>`` - A value of 0 means capture and buffer audio and video together. A - value of 1 (default) means to do video capture only and let the audio - go through a loopback cable from the TV card to the sound card. - -``--tv-mjpeg`` - Use hardware MJPEG compression (if the card supports it). When using - this option, you do not need to specify the width and height of the - output window, because mpv will determine it automatically from - the decimation value (see below). - -``--tv-decimation=<1|2|4>`` - choose the size of the picture that will be compressed by hardware - MJPEG compression: - - :1: full size - - - 704x576 PAL - - 704x480 NTSC - - :2: medium size - - - 352x288 PAL - - 352x240 NTSC - - :4: small size - - - 176x144 PAL - - 176x120 NTSC - -``--tv-quality=<0-100>`` - Choose the quality of the JPEG compression (< 60 recommended for full - size). - -``--tv-scan-autostart`` - Begin channel scanning immediately after startup (default: disabled). - -``--tv-scan-period=<0.1-2.0>`` - Specify delay in seconds before switching to next channel (default: - 0.5). Lower values will cause faster scanning, but can detect inactive - TV channels as active. - -``--tv-scan-threshold=<1-100>`` - Threshold value for the signal strength (in percent), as reported by - the device (default: 50). A signal strength higher than this value will - indicate that the currently scanning channel is active. - - Cache ----- |