summaryrefslogtreecommitdiffstats
path: root/DOCS/man/en
diff options
context:
space:
mode:
Diffstat (limited to 'DOCS/man/en')
-rw-r--r--DOCS/man/en/changes.rst5
-rw-r--r--DOCS/man/en/input.rst2
-rw-r--r--DOCS/man/en/options.rst100
3 files changed, 56 insertions, 51 deletions
diff --git a/DOCS/man/en/changes.rst b/DOCS/man/en/changes.rst
index 860b5194da..af890a4178 100644
--- a/DOCS/man/en/changes.rst
+++ b/DOCS/man/en/changes.rst
@@ -161,9 +161,14 @@ Command Line Switches
``-hardframedrop`` ``--framedrop=hard``
``-lavdopts ...`` ``--vd-lavc-...``
``-lavfdopts`` ``--demuxer-lavf-...``
+ ``-lircconf`` ``--input-lirc-conf``
``-loop 0`` ``--loop=inf``
``-mixer-channel`` AO suboptions (``alsa``, ``oss``)
``-mixer`` AO suboptions (``alsa``, ``oss``)
+ ``-mouse-movements`` ``--input-cursor``
+ ``-noar`` ``--no-input-appleremote``
+ ``-noconsolecontrols`` ``--no-input-terminal``
+ ``-nojoystick`` ``--no-input-joystick``
``-nosound`` ``--no-audio``
``-osdlevel`` ``--osd-level``
``-panscanrange`` ``--video-zoom``, ``--video-pan-x/y``
diff --git a/DOCS/man/en/input.rst b/DOCS/man/en/input.rst
index 52ba8168f3..cb2361f27e 100644
--- a/DOCS/man/en/input.rst
+++ b/DOCS/man/en/input.rst
@@ -33,7 +33,7 @@ General Input Command Syntax
Note that by default, the right Alt key can be used to create special
characters, and thus does not register as a modifier. The option
-``--no-right-alt-gr`` changes this behavior.
+``--no-input-right-alt-gr`` changes this behavior.
Newlines always start a new binding. ``#`` starts a comment (outside of quoted
string arguments). To bind commands to the ``#`` key, ``SHARP`` can be used.
diff --git a/DOCS/man/en/options.rst b/DOCS/man/en/options.rst
index ecb5dc4dc1..968cf014d9 100644
--- a/DOCS/man/en/options.rst
+++ b/DOCS/man/en/options.rst
@@ -97,9 +97,6 @@ OPTIONS
configuration files specifying a list of fallbacks may make sense. See
`AUDIO OUTPUT DRIVERS`_ for details and descriptions of available drivers.
-``--ar``, ``--no-ar``
- Enable/disable AppleIR remote support. Enabled by default.
-
``--aspect=<ratio>``
Override movie aspect ratio, in case aspect information is incorrect or
missing in the file being played. See also ``--no-aspect``.
@@ -575,15 +572,6 @@ OPTIONS
Note that the ``--no-config`` option takes precedence over this option.
-``--consolecontrols``, ``--no-consolecontrols``
- ``--no-consolecontrols`` prevents the player from reading key events from
- standard input. Useful when reading data from standard input. This is
- automatically enabled when ``-`` is found on the command line. There are
- situations where you have to set it manually, e.g. if you open
- ``/dev/stdin`` (or the equivalent on your system), use stdin in a playlist
- or intend to read from stdin later on via the loadfile or loadlist slave
- commands.
-
``--contrast=<-100-100>``
Adjust the contrast of the video signal (default: 0). Not supported by all
video output drivers.
@@ -1225,23 +1213,21 @@ OPTIONS
Specify input configuration file other than the default
``~/.mpv/input.conf``.
-``--input-ar-delay``
- Delay in milliseconds before we start to autorepeat a key (0 to disable).
-
-``--input-ar-rate``
- Number of key presses to generate per second on autorepeat.
-
``--no-input-default-bindings``
Disable mpv default (builtin) key bindings.
-``--input-keylist``
- Prints all keys that can be bound to commands.
-
``--input-cmdlist``
Prints all commands that can be bound to keys.
-``--input-js-dev``
- Specifies the joystick device to use (default: ``/dev/input/js0``).
+``--input-keylist``
+ Prints all keys that can be bound to commands.
+
+``--input-test``
+ Input test mode. Instead of executing commands on key presses, mpv
+ will show the keys and the bound commands on the OSD. Has to be used
+ with a dummy video, and the normal ways to quit the player will not
+ work (key bindings that normally quit will be shown on OSD only, just
+ like any other binding). See `INPUT.CONF`_.
``--input-file=<filename>``
Read commands from the given file. Mostly useful with a FIFO.
@@ -1252,16 +1238,50 @@ OPTIONS
When the given file is a FIFO mpv opens both ends, so you can do several
`echo "seek 10" > mp_pipe` and the pipe will stay valid.
-``--input-test``
- Input test mode. Instead of executing commands on key presses, mpv
- will show the keys and the bound commands on the OSD. Has to be used
- with a dummy video, and the normal ways to quit the player will not
- work (key bindings that normally quit will be shown on OSD only, just
- like any other binding). See `INPUT.CONF`_.
+``--input-terminal``, ``--no-input-terminal``
+ ``--no-input-terminal`` prevents the player from reading key events from
+ standard input. Useful when reading data from standard input. This is
+ automatically enabled when ``-`` is found on the command line. There are
+ situations where you have to set it manually, e.g. if you open
+ ``/dev/stdin`` (or the equivalent on your system), use stdin in a playlist
+ or intend to read from stdin later on via the loadfile or loadlist slave
+ commands.
+
+``--input-appleremote``, ``--no-input-appleremote``
+ Enable/disable AppleIR remote support. Enabled by default.
+
+``--input-ar-delay``
+ Delay in milliseconds before we start to autorepeat a key (0 to disable).
+
+``--input-ar-rate``
+ Number of key presses to generate per second on autorepeat.
+
+``--input-cursor``, ``--no-input-cursor``
+ Permit mpv to receive pointer events reported by the video output
+ driver. Necessary to select the buttons in DVD menus. Supported for
+ X11-based VOs (x11, xv, etc) and the gl, direct3d and corevideo VOs.
-``--joystick``, ``--no-joystick``
+``--input-joystick``, ``--no-input-joystick``
Enable/disable joystick support. Disabled by default.
+``--input-js-dev``
+ Specifies the joystick device to use (default: ``/dev/input/js0``).
+
+``--input-lirc``, ``--no-input-lirc``
+ Enable/disable LIRC support. Enabled by default.
+
+``--input-lirc-conf=<filename>``
+ (LIRC only)
+ Specifies a configuration file for LIRC (default: ``~/.lircrc``).
+
+``--input-media-keys``, ``--no-input-media-keys``
+ OSX only: Enabled by default. Enables/disable media keys support.
+
+``--input-right-alt-gr``, ``--no-input-right-alt-gr``
+ (Cocoa and Windows only)
+ Use the right Alt key as Alt Gr to produce special characters. If disabled,
+ count the right Alt as an Alt modifier key. Enabled by default.
+
``--no-keepaspect``, ``--keepaspect``
``--no-keepaspect`` will always stretch the video to window size, and will
disable the window manager hints that force the window aspect ratio.
@@ -1292,13 +1312,6 @@ OPTIONS
Stop after a given time relative to the start time.
See ``--start`` for valid option values and examples.
-``--lirc``, ``--no-lirc``
- Enable/disable LIRC support. Enabled by default.
-
-``--lircconf=<filename>``
- (LIRC only)
- Specifies a configuration file for LIRC (default: ``~/.lircrc``).
-
``--list-options``
Prints all available options.
@@ -1349,9 +1362,6 @@ OPTIONS
``--mc=<seconds/frame>``
Maximum A-V sync correction per frame (in seconds)
-``--media-keys``, ``--no-media-keys``
- OSX only: Enabled by default. Enables/disable media keys support.
-
``--merge-files``
Pretend that all files passed to mpv are concatenated into a single, big
file. This uses timeline/EDL support internally. Note that this won't work
@@ -1386,11 +1396,6 @@ OPTIONS
1). A value of 1 means square pixels (correct for (almost?) all LCDs). See
also ``--monitoraspect`` and ``--aspect``.
-``--mouse-movements``, ``--no-mouse-movements``
- Permit mpv to receive pointer events reported by the video output
- driver. Necessary to select the buttons in DVD menus. Supported for
- X11-based VOs (x11, xv, etc) and the gl, direct3d and corevideo VOs.
-
``--no-msgcolor``
Disable colorful console output on terminals.
@@ -1876,11 +1881,6 @@ OPTIONS
- ``--reset-on-next-file=all``
Try to reset all settings that were changed during playback.
-``--right-alt-gr``, ``--no-right-alt-gr``
- (Cocoa and Windows only)
- Use the right Alt key as Alt Gr to produce special characters. If disabled,
- count the right Alt as an Alt modifier key. Enabled by default.
-
``--rtsp-transport=<lavf|udp|tcp|http>``
Select RTSP transport method (default: tcp). This selects the underlying
network transport when playing ``rtsp://...`` URLs. The value ``lavf``