diff options
Diffstat (limited to 'DOCS/Polish/mplayer.1')
| -rw-r--r-- | DOCS/Polish/mplayer.1 | 472 |
1 files changed, 299 insertions, 173 deletions
diff --git a/DOCS/Polish/mplayer.1 b/DOCS/Polish/mplayer.1 index 8565cec0f9..4b8e8567d5 100644 --- a/DOCS/Polish/mplayer.1 +++ b/DOCS/Polish/mplayer.1 @@ -1,4 +1,4 @@ -.\" MPlayer (C) 2000-2001 Arpad Gereoffy <arpi@esp-team.scene.hu> +.\" MPlayer (C) 2000-2001 Arpad Gereoffy <sendmail@to.mplayer-users> .\" This manpage was/is done by Gabucino .\" .TH MPlayer @@ -8,39 +8,42 @@ mplayer \- Movie Player for Linux .B mplayer .RB [ \-gui ] .RB [ \-v ] +.RB [ \-help / -h / --help ] .RB [ \-quiet ] .RB [ \-vo\ <driver>[:<device>] ] .RB [ \-ao\ <driver>[:<device>] ] -.RB [ \-vcd\ track\ number ] -.RB [ \-sb\ byte\ position ] +.RB [ \-vcd\ <track\ number> ] +.RB [ \-sb\ <byte\ position> ] .RB [ \-nosound ] -.RB [ \-abs\ bytes ] -.RB [ \-delay\ secs ] +.RB [ \-abs\ <bytes> ] +.RB [ \-delay\ <secs> ] .RB [ \-nobps ] -.RB [ \-aid\ id ] -.RB [ \-vid\ id ] -.RB [ \-fps\ rate ] -.RB [ \-mc\ seconds/5f ] +.RB [ \-aid\ <id> ] +.RB [ \-alang\ <audio\ stream\ languages> ] +.RB [ \-vid\ <id> ] +.RB [ \-fps\ <rate> ] +.RB [ \-mc\ <seconds/5f> ] .RB [ \-fs ] .RB [ \-vm ] .RB [ \-zoom ] -.RB [ \-x\ x ] -.RB [ \-y\ y ] -.RB [ \-xy\ factor ] -.RB [ \-pp\ quality ] -.RB [ \-include\ configfile ] -.RB [ \-lircconf\ configfile ] -.RB [ \-ffactor\ number ] -.RB [ \-sub\ file ] -.RB [ \-subfps\ rate ] -.RB [ \-subdelay\ sec ] +.RB [ \-x\ <x> ] +.RB [ \-y\ <y> ] +.RB [ \-sws\ <software\ scaler\ type> ] +.RB [ \-xy\ <factor> ] +.RB [ \-pp\ <quality> ] +.RB [ \-include\ <config\ file> ] +.RB [ \-lircconf\ <config\ file> ] +.RB [ \-ffactor\ <number> ] +.RB [ \-sub\ <filename> ] +.RB [ \-subfps\ <rate> ] +.RB [ \-subdelay\ <seconds> ] .RB [ \-z\ <0-8> ] .RB [ \-idx ] .RB [ \-forceidx ] .RB [ \-nodshow ] .RB [ \-noxv ] .RB [ \-forcexv ] -.RB [ \-ss\ time ] +.RB [ \-ss\ <time> ] .RB [ \-dumpaudio ] .RB [ \-dumpvideo ] .RB [ \-dumpstream ] @@ -48,83 +51,128 @@ mplayer \- Movie Player for Linux .RB [ \-framedrop ] .RB [ \-nodouble ] .RB [ \-double ] -.RB [ \-stereo\ mode ] -.RB [ \-channels\ n ] -.RB [ \-srate\ Hz ] -.RB [ \-osdlevel\ level ] -.RB [ \-config\ file ] -.RB [ \-display\ name ] +.RB [ \-stereo\ <mode> ] +.RB [ \-channels\ <n> ] +.RB [ \-srate\ <Hz> ] +.RB [ \-osdlevel\ <level> ] +.RB [ \-config\ <file> ] +.RB [ \-display\ <name> ] +.RB [ \-wid\ <window\ id> ] .RB [ \-unicode ] .RB [ \-utf8 ] -.RB [ \-fsmode\ mode ] -.RB [ \-vc\ video\ codec\ name ] -.RB [ \-ac\ audio\ codec\ name ] -.RB [ \-vfm\ video\ codec\ family ] -.RB [ \-afm\ audio\ codec\ family ] -.RB [ \-frames\ number ] -.RB [ \-autoq\ quality ] -.RB [ \-fb\ device ] -.RB [ \-fbmode\ modename ] -.RB [ \-fbmodeconfig\ filename ] +.RB [ \-fsmode\ <mode> ] +.RB [ \-vc\ <video\ codec\ name> ] +.RB [ \-ac\ <audio\ codec\ name> ] +.RB [ \-vfm\ <video\ codec\ family> ] +.RB [ \-afm\ <audio\ codec\ family> ] +.RB [ \-frames\ <number> ] +.RB [ \-autoq\ <quality> ] +.RB [ \-fb\ <device> ] +.RB [ \-fbmode\ <modename> ] +.RB [ \-fbmodeconfig\ <filename> ] +.RB [ \-monitor_hfreq\ <horizontal\ frequency\ range> ] +.RB [ \-monitor_vfreq\ <vertical\ frequency\ range> ] +.RB [ \-monitor_dotclock\ <dotclock\ (or\ pixelclock)\ range> ] .RB [ \-benchmark ] -.RB [ \-dvd\ titleid ] -.RB [ \-chapter\ chapterid ] -.RB [ \-dvdangle\ angleid ] -.RB [ \-dvdkey\ key ] -.RB [ \-skin\ skin ] -.RB [ \-aspect\ ratio ] -.RB [ \-monitoraspect\ ratio ] -.RB [ \-subcp\ codepage ] +.RB [ \-dvd\ <title\ id> ] +.RB [ \-chapter\ <chapter\ id> ] +.RB [ \-dvdangle\ <angle\ id> ] +.RB [ \-alang\ <country\ code> ] +.RB [ \-slang\ <country\ code> ] +.RB [ \-sid\ <subtitle \id> ] +.RB [ \-dvdkey\ <key> ] +.RB [ \-skin\ <skin\ name> ] +.RB [ \-aspect\ <ratio> ] +.RB [ \-monitoraspect\ <ratio> ] +.RB [ \-subcp\ <codepage> ] .RB [ \-dumpmpsub ] -.RB [ \-screenw\ pixels ] -.RB [ \-screenh\ pixels ] -.RB [ \-cache\ kbytes ] -.RB [ \-bpp\ depth ] +.RB [ \-dumpfile ] +.RB [ \-dumpsub ] +.RB [ \-screenw\ <pixels> ] +.RB [ \-screenh\ <pixels> ] +.RB [ \-cache\ <kbytes> ] +.RB [ \-bpp\ <depth> ] .RB [ \-flip ] .RB [ \-playlist\ <filename> ] .RB [ \-slave ] -.I - or file or device +.RB [ \-loop\ <num> ] +.RB [ \-mixer\ <device> ] +.RB [ \-master\ yes/no ] +.RB [ \-tv\ suboptions ] +.RB [ \-dapsync ] +.RB [ \-softsleep ] +.I < - | file | URL | device > .PP .SH DESCRIPTION .I mplayer -MPlayer is a movie player for LINUX (runs on many other Unices, and -non-x86 CPUs, see section 6). It plays most MPEG, AVI and ASF/WMV files, -supported by many native and Win32 DLL codecs. You can watch VideoCD, -SVCD, DVD and even DivX movies too (and you don't need the avifile library -at all!). The another big feature of mplayer is the wide range of -supported output drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, -fbdev, AAlib, but you can use SDL (and this way all drivers of SDL) and -some lowlevel card-specific drivers (for Matrox, 3Dfx and Radeon) too! -Most of them supports software or hardware scaling, so you can enjoy -movies in fullscreen. And what about the nice big antialiased shaded -subtitles (7 supported types!!!) with european/ISO 8859-1,2 (hungarian, -english, czech, etc), cyrillic, korean fonts, and OSD? +MPlayer is a movie player for LINUX (runs on many other Unices, and non-x86 +CPUs, see section 6). It plays most MPEG, AVI and ASF/WMV files, supported by +many native and Win32 DLL codecs. You can watch VideoCD, SVCD, DVD, and even +DivX movies too (and you don't need the avifile library at all!). + +Another big feature of mplayer is the wide range of supported output drivers : +X11, Xv, DGA, OpenGL, SVGAlib, fbdev, AAlib, DirectFB, SDL (and all the drivers +it supports), and some lowlevel card-specific drivers (for Matrox, 3Dfx and +Radeon) too! Most of them supports software or hardware scaling, so you can +enjoy movies in fullscreen. + +Several subtitles types are supported (curently 9 !) and the fonts are +rendered with nice big antialiased shaded fonts ! Of course there is support +for european/ISO 8859-1,2 (hungarian, english, czech, etc), cyrillic, korean +fonts. .LP -.SH "GENERAL OPTIONS" -.TP -.I NOTE -Every "flag" option has "noflag" pair, e.g. -fs opposite is -nofs +.SH "GUI OPTIONS" +.I NOTE: +The GUI code has to be compiled in *explicitly*, for details see the +documentation. .TP .B \-gui -start MPlayer with the GUI mode. You have to compile it in, for details +start MPlayer in GUI mode. +.TP +.B \-skin <skin\ directory> +load skin from this directory (WITHOUT path name!). For example '-skin fittyfene' tries these : + + /usr/local/share/mplayer/Skin/fittyfene + ~/.mplayer/Skin/fittyfene +.LP +.SH "DVD OPTIONS" +.I NOTE: +These options are valid only with DVD support compiled in. For details, see the documentation. .TP .B \-dvd\ titleid tell MPlayer which movies (marked with titleid) to play. For example sometimes '1' are trailers, and '2' is the real movie. .TP -.B \-sid\ id +.B \-sid\ <id> Turns on DVD subtitle displaying. Also, you MUST specify a number which -corresponds to a DVD subtitle language (1-...). For the list of available -subtitles, use with the -v switch and look at the output. (EXPERIMENTAL) +corresponds to a DVD subtitle language (0-31). For the list of available +subtitles, use with the -v switch and look at the output. .TP -.B \-chapter\ chapterid +.B \-chapter\ <chapter\ id> specify which chapter to start playing at. Examples can be found below. .TP -.B \-dvdangle\ angleid +.B \-dvdangle\ <angle\ id> some DVD discs contain scenes that can be viewed from multiple angles. Here you can tell MPlayer which angles to use. Examples can be found below. .TP +.B \-alang\ <audio\ stream\ language> +Used when playing DVD disks. Expects a two-letter country code(s) as +parameter, and always tries to play back audio streams those language +matches the given code. For example: -alang hu,en will always try to play +hungarian or if it's non-existant then english audio streams if there are any. +.TP +.B \-slang\ <subtitle\ language> +See the former, but this option needs a two-letter parameter, a country code. +Like: -slang hu,en will always select hungarian or if it's non existant then +english subtitles, if there are any. For the list of available subtitles, use +with the -v switch and look at the output. +.LP +.SH "GENERAL OPTIONS" +.TP +.I NOTE +Every "flag" option has "noflag" pair, e.g. -fs opposite is -nofs +.TP .B \-vo\ <driver>[:<device>] select video output driver and optinaly device. "device" is valid with SDL and GGI too, it means sub-driver then (for example: -vo sdl:aalib). @@ -144,7 +192,7 @@ you can get the list of available drivers executing .I mplayer -ao help .TP -.B \-vcd\ track +.B \-vcd\ <track> play video cd track from device instead of plain file .TP .B \-nosound @@ -166,35 +214,31 @@ output drivers support it. flip image (useful for example for old Indeo codecs). Supported only(?) by the 'sdl' and 'x11' outputs. .TP -.B \-x\ x -scale image to x width [if driver suppports!] -.TP -.B \-y\ y -scale image to y height +.B \-x\ <x> +scale image to x width (if driver suppports) .TP -.B \-xy\ factor -scale image by <factor> +.B \-y\ <y> +scale image to y height (if driver supports) .TP -.B \-pp\ quality -apply postprocess filter on decoded image. -You need a STRONG CPU in order to use this! -The supported formats and settings are: - - MPEG 1/2 0 (none), TODO - OpenDivX 0 (none), TODO - DivX4 0 (none), TODO - DivX 0 (none), TODO - - -pp 0x20000 TODO +.B \-sws\ <software\ scaler\ type> +this option sets the quality (and speed, respectively) of the software scaler, +with the -zoom option. For example with x11 or other outputs which lack +hardware acceleration. Possible settings are : + 0 - fast bilinear (default) + 1 - bilinear + 2 - bicubic (best quality) .TP -.B \-autoq\ quality +.B \-xy\ <factor> +scale image by <factor> +.TP +.B \-autoq\ <quality> dynamically changes the level of postprocess, depending on spare CPU time available. Uses the same value ranges as -pp . The number you specify will be the maximum level used. Usually you can use some big number. You don't have to (and don't) use together with -pp ! .TP -.B \-ffactor\ number +.B \-ffactor\ <number> resample alphamap of the font. Can be: 0 plain white fonts @@ -202,26 +246,26 @@ resample alphamap of the font. Can be: 1 narrow black outline 10 bold black outline .TP -.B \-sub\ file +.B \-sub\ <subtitle\ file> use/display this subtitle file .TP -.B \-subfps\ rate -specify frame/sec rate of subtitle file +.B \-subfps\ <rate> +specify frame/sec rate of subtitle file (float number) (ONLY for frame-based SUB files, i.e. NOT MicroDVD format!) -(default: the same as the movie) +(default: the same fps as the movie) .TP -.B \-subdelay\ sec +.B \-subdelay\ <sec> delays subtitles by <sec> seconds. Can be negative. .TP -.B \-osdlevel\ level +.B \-osdlevel\ <level> specifies which mode the OSD should start in (0 : none, 1 : seek, 2: seek+timer) (default = 2) .TP -.B \-lircconf\ configfile +.B \-lircconf\ <config\ file> specifies a configfile for LIRC (see http://www.lirc.org) if you don't like the default ~/.lircrc .TP .B \-v -enable verbose output (more -v means more verbose) +enable verbose output (more -v means more verbosity) .TP .B \-quiet display less output, status messages. @@ -229,22 +273,15 @@ display less output, status messages. .B \-benchmark used in combination with -nosound and -vo null for benchmarking. .TP -.B \-skin skin directory -load skin from this directory (WITHOUT path name!). For example '-skin fittyfene' tries these : - - /usr/local/share/mplayer/Skin/fittyfene - ~/.mplayer/Skin/fittyfene -.TP -.B \-aspect ratio +.B \-aspect <ratio> set aspect ratio of movies. It's autodetected on MPEG files, and can't be autodetected on AVI files. Examples: -aspect 4:3 or -aspect 1.3333 -aspect 16:9 or -aspect 1.7777 -(has -noaspect pair) .TP -.B \-monitoraspect ratio +.B \-monitoraspect <ratio> set aspect ratio of your screen. Examples: -monitoraspect 4:3 or 1.3333 @@ -254,13 +291,27 @@ set aspect ratio of your screen. Examples: .B \-playlist <file> play files according to this filelist (1 file/row). .TP -.B \-slave -This option switches on slave mode. This is intended for use -of MPlayer as a backend to other programs. Instead of intercepting keyboard -events, MPlayer will read simplistic command lines from its stdin. -See section -.B SLAVE MODE PROTOCOL -for the syntax. +.B \-ss\ <time> +seek to given time position. For example : + + -ss 56 seeks to 56 seconds + -ss 01:10:00 seeks to 1 hour 10 min + +.TP +.B \-loop\ <num> +loops movie playback <num> times. 0 means forever. +.TP +.B \-mixer\ <device> +this option will tell MPlayer to use a different device for mixing than +/dev/mixer. +.TP +.B \-master\ yes/no +Setting this option to "yes" will instruct MPlayer to change the MASTER +mixer channel when setting the volume, and "no" means the PCM channel. +.TP +.B \-tv\ suboptions +this option enables the TV grabbing feature of MPlayer. For complete +documentation, please see documentation.html chapter 2.5 .IP .SH "ADVANCED OPTIONS" .TP @@ -278,7 +329,7 @@ for example : -vc ffmpeg12 use libavcodec's MPEG1/2 codec -vc divx4 use ProjectMayo's DivX codec -See -vc help for FULL list ! +See '-vc help' for FULL list ! .TP .B \-ac <name> force usage of a specific audio codec, according to its name in codecs.conf, @@ -292,7 +343,7 @@ for example : -ac vorbis use libvorbis -ac ffmp3 use ffmpeg's MP3 decoder (SLOW) -See -ac help for FULL list ! +See '-ac help' for FULL list ! .TP .B \-vfm <1-12> force usage of a specific codec FAMILY, and FALLBACK to default if failed. @@ -309,7 +360,8 @@ For example: See -vc help for FULL list ! -NOTE : if libdivxdecore support was compiled in, then type 3 and 7 now contains +.I NOTE: +if libdivxdecore support was compiled in, then type 3 and 7 now contains just the same DivX4 codec, but different APIs to reach it. For difference between them and when to use which, check the DivX4 section in the documentation. @@ -317,8 +369,7 @@ documentation. .B \-afm <1-12> force usage of a specific audio format. For example: - -afm 1 use libmp3 (mp2/mp3, - but not mp1) + -afm 1 use libmp3 (mp2/mp3, but not mp1) -afm 2 suppose raw PCM audio -afm 3 use libac3 -afm 4 use a matching Win32 codec @@ -328,43 +379,125 @@ force usage of a specific audio format. For example: See -ac help for FULL list ! .TP -.B \-sb\ position +.B \-sb\ <byte\ position> seek to byte position .TP -.B \-ss\ time -seek to given time position. For example : - - -ss 56 - -ss 01:10:00 - -.TP -.B \-bpp\ depth +.B \-bpp\ <depth> use different color depth than autodetect. Not all -vo drivers support it (fbdev, dga2, svga, vesa). .TP -.B \-abs\ bytes +.B \-pp\ <quality> +apply postprocess filter on decoded image. +Postprocessing effect depends on the codec and works only for MPEG, OpenDivX, +DivX4, DivX. Quality is an hexadecimal number built as below: + +0x 00 TX hv YZ + ^^ ^^ ^^ + || | || + || | |\- postprocessing flag for luminance: + || | | 1/2: v/h deblock 4: dering + || | | 8: auto contrast/brightness correction + || | | + || | \-- postproc flags for color: + || | 1/2: v/h deblock 4: dering + || | + || \---- experimental deblocking filters: + || 11: X's filter 22: x1 filter + || + |\------- deinterlacing modes + | 1: linear interpolation 2: linear blend + | 4: cubic interpolation 8: median + | + \-------- temporal denoise filter: 1 enabled + +.I HINT: +0x2007f or 0x7f are known to give good results. +.I NOTE: +0x20000 (deinterlacing) may be required for DVD playback +.TP +.B \-npp\ <options> (EXPERIMENTAL) +This option allows to give more litterate options for postprocessing, and is +another way of calling it (not with -pp). + +.I EXAMPLE: + '-pp 0x2007f' <=> '-npp hb,vb,dr,al,lb' + '-pp 0x7f' <=> '-npp hb,vb,dr,al' + +The options for -npp are a coma separated list of the keywords below: + de or default : hdeblock:a,vdeblock:a, + dering:a,autolevels,tmpnoise:a:150:200:400 (0xTODO) + fa or fast : x1hdeblock:a,x1vdeblock:a, + dering:a,autolevels,tmpnoise:a:150:200:400 (0xTODO) + hb or hdeblock : horizontal deblocking filter (0xTODO) + vb or vdeblock : vertical deblocking filter (0xTODO) + hr or rkhdeblock : rk horizontal deblock filter (0xTODO) + vr or rkvdeblock : rk vertical deblock filter (0xTODO) + h1 or x1hdeblock : x1 horizontal deblock filter (0xTODO) + v1 or x1vdeblock : y1 horizontal deblock filter (0xTODO) + dr or dering : TODO + al or autolevels : brightness/contrast correction (0xTODO) + lb or linblenddeint : linear blend deinterlacing (0x20000) + li or linipoldeint : linear interpolation deinterlacing (0x10000) + ci or cubicipoldeint : cubic interpolation deinterlacing (0x40000) + md or mediandeint : median deinterlacing (0x80000) + tn or tmpnoise : temporal denoise filter (0x100000) + +These keywords accept a '-' prefix to disable the option. + +.I EXAMPLE: + '-npp de,-al' means 'default filters without brightness/contrast correction' + +A postfix letter, separated by ':' may be appended to the option to indicate +its scope: + a : automatically switches the filter off if the cpu is too slow + c : do chrominance filtering too + y : do not do chrominance filtering (that is only luminance filtering) + +Each filter defaults to 'c' (chrominance). + +.I EXAMPLE: + '-npp de,tn:1:2:3' means 'enable default filters & temporal denoiser' + '-npp hb:y,vb:a -autoq 6' means 'deblock horizontal only luminance, and + automatically switch vertical deblocking on/off depending on available + cpu time' + +.I HINT: + the following values are known to give good results: + -npp default -autoq 6 and -npp tn:150:200:400 for the denoiser + +.TP +.B \-slave +This option switches on slave mode. This is intended for use +of MPlayer as a backend to other programs. Instead of intercepting keyboard +events, MPlayer will read simplistic command lines from its stdin. +See section +.B SLAVE MODE PROTOCOL +for the syntax. +.TP +.B \-abs\ <bytes> sound card audio buffer size (in bytes, default: measuring) .TP -.B \-delay\ secs +.B \-delay\ <secs> audio delay in seconds (may be +/- float value) .TP .B \-nobps don't use avg. byte/sec value for A-V sync (AVI) .TP -.B \-aid\ id +.B \-aid\ <id> select audio channel [MPG: 0-31 AVI: 1-99 ASF: 0-127 VOB: 128-...] .TP -.B \-vid\ id +.B \-vid\ <id> select video channel [MPG: 0-15 AVI: -- ] .TP -.B \-fps\ value -force frame rate (if value is wrong in the header) +.B \-fps\ <value> +force frame rate (if value is wrong in the header) (float number) .TP -.B \-mc\ seconds/5frame +.B \-mc\ <seconds/5frame> maximum sync correction per 5 frames (in seconds) .TP .B \-ni -force usage of non-interleaved AVI parser +force usage of non-interleaved AVI parser (fixes playing +of some bad AVI files) .TP .B \-include configfile specify config file to be parsed after the default @@ -385,11 +518,11 @@ indexes. .B \-nodshow disables usage of DirectShow video codecs .TP -.B \-noxv -disable XVideo hardware acceleration (with SDL only!) +.B \-noxv (SDL only) +disable XVideo hardware acceleration .TP -.B \-forcexv -force using XVideo (SDL!) +.B \-forcexv (SDL only) +force using XVideo .TP .B \-dumpaudio writes audio stream of the file to ./stream.dump (mostly usable @@ -407,12 +540,9 @@ sync (default) frame dropping : decode all frames, video may skip .TP .B \-nodouble -disable doublebuffering (default). Currently this is only honoured by the Xv and the DGA driver. +disables doublebuffering. With the DGA driver this also disables OSD support but yields some speed gain. .TP -.B \-double -enable doublebuffering. Currently this is only honoured by the Xv and the DGA driver. -.TP .B \-dvdkey key key to decrypt stream encrypted with CSS. For example : -dvdkey F169072699 (this is NOT for DVD playing! For DVD use the -dvd option!) @@ -433,16 +563,20 @@ select number of audio output channels to be used Currently this option is only honoured for AC3 audio. .TP -.B \-srate Hz +.B \-srate <Hz> specifies Hz to playback audio on. Has effect on playback speed! .TP -.B \-config configfile +.B \-config <config\ file> specifies where to search for config file .TP -.B \-display name +.B \-display <name> specify the hostname and display number of the X server you want to display on. For example : -display xtest.localdomain:0 .TP +.B \-wid\ <window\ id> +This tells MPlayer to use a X11 window, which is useful to embed MPlayer in a +browser (with the plugger extension for instance) +.IP .B \-unicode tells MPlayer to handle the subtitle file as UNICODE. Contrary: -nounicode @@ -465,21 +599,26 @@ value between 0 and 7. .B \-frames\ number MPlayer plays <number> frames, then quits. .TP -.B \-fb\ device +.B \-fb\ <device> (FBdev or DirectFB only) Specifies the framebuffer device to use. By default it uses /dev/fb0 . -Only valid for the fbdev driver. .TP -.B \-fbmode\ modename +.B \-fbmode\ <modename> (FBdev only) Change videomode to the one that is labelled as <modename> in /etc/fb.modes . -Only valid for the fbdev driver. .TP .I NOTE VESA framebuffer doesn't support mode changing. .TP -.B \-fbmodeconfig\ filename +.B \-fbmodeconfig\ <filename> (FBdev only) Use this config file instead of the default /etc/fb.modes . Only valid for the fbdev driver. .TP +.B \-monitor_hfreq <horizontal frequency range> (FBdev only) +.TP +.B \-monitor_vfreq <vertical frequency range> (FBdev only) +.TP +.B \-monitor_dotclock <dotclock\ (or\ pixelclock) range> (FBdev only) +Look into etc/example.conf for further information and in DOC/video.html. +.TP .B \-subcp\ codepage If your system supports iconv(3), you can use this option to specify codepage of the subtitle. Examples: @@ -492,18 +631,18 @@ specify codepage of the subtitle. Examples: Convert the given subtitle (specified with the -sub switch) to MPlayer's subtitle format, MPsub. Dumps a dump.mpsub file to current directory. .TP -.B \-screenw\ pixels +.B \-screenw\ <pixels> If you use an output driver which can't know the resolution of the screen (mga/fbdev/x11 and/or TVout) this is where you can specify the horizontal resolution. .TP -.B \-screenh\ pixels +.B \-screenh\ <pixels> If you use an output driver which can't know the resolution of the screen (mga/fbdev/x11 and/or TVout) this is where you can specify the vertical resolution. .TP -.B \-cache\ kbytes -This option specifies how much memory to use when precaching a file/URL . +.B \-cache\ <kbytes> +This option specifies how much memory to use when precaching a file/URL. Especially useful on slow media. Default is off. .IP .SH "ALPHA/BETA CODE" @@ -513,19 +652,6 @@ These are included in this manpage just for completeness! These may or may NOT work! If you don't know what are these, you DON'T need these! In either case, double-check the documentation ! .TP -.B \-br\ rate -used with '-vo odivx' . -Specifies the bitrate to encode OpenDivx at -(in bits! e.g: 780000). -.TP -.I NOTE -You CAN'T encode sound, only video right now! Don't ask for it, -it's on the TODO list. -.TP -.B \-encode\ file -used with '-vo odivx' . -Specifies the output OpenDivX file. Won't overwrite. -.TP .B \-dumpvideo dump video stream to ./stream.dump (only with MPEG-PS) (not very usable) .IP @@ -578,7 +704,7 @@ seek <NUM> continue at second NUM skip <NUM> skip NUM seconds (may be negative) -quit exit mplayer +quit exit MPlayer .IP .SH FILES AND DIRECTORIES @@ -631,7 +757,7 @@ tell us all that we need to know to identify your problem. Check documentation ! MPlayer is (C) 2000-2001 -.I Arpad Gereoffy <arpi@thot.banki.hu> +.I Arpad Gereoffy <sendmail@to.mplayer-users> This manpage is written and maintained by .I Gabucino . |