Remove useless video filters

Most of these have very limited actual use, or are even entirely
useless. They only serve to bloat the codebase and to make life harder.
Drowning users in tons of barely useful filters isn't exactly helpful
either. Some of these filters were redundant or marked as obsolete.

The dlopen and lua (to be added soon) video filters provide ways to add
custom filters.

Detailed listing for each filter with reasons (with contributions from
divVerent and lachs0r):

1bpp:
    Replaced by "scale".
2xsai:
    Pixel art scaling algorithm, useless with lossy video.
blackframe:
    Not very useful. Apparently one use is combining it with scripts,
    that pass the
bmovl:
    Weirdly complex and insane (using FIFO commands), questionable use.
cropdetect:
    Only sort-of useful when used with scripts, and then it will be
    very fragile.
    It's probably better to use the dlopen rectangle filter, or to
    implement the common use-case in a better way.
decimate:
    Not needed/useful with modern video codecs, is an
    encoding-only filter.
denoise3d:
    "hqdn3d" is better.
detc:
    Some of the worse deteleciners.
dint:
    Useless, actually crashes. (On an assert in vf.c that is disabled
    by default in mplayer-svn.)
dvbscale:
    Not even practical, and the same effect can be achieved through
    other means.
eq:
    Worse/older version of eq2.
field:
    Limited use, available as dlopen filter.
fil:
    Quoting the manpage:
        This filter is very similar to the il filter but much faster,
        the main disadvantage is that it does not always work.
        Especially if combined with other filters it may produce
        randomly messed up images, so be happy if it works but do not
        complain if it does not for your combination of filters.
filmdint:
    Kind of redundant with pullup, and slightly worse.
fixpts:
    Never useful. (Most if not all filters have been fixed for PTS.)
framestep:
    Questionable use. For things like creating thumbnails, ffmpeg or
    --sstep should be used.
geq:
    Limited use, will be redundant with the "lua" filter.
halfpack:
    Useless, probably redundant with "scale".
harddup:
    Useless.
hue:
    Most VOs support this.
il:
    Useless.
ivtc:
    Another of the worse deteleciners.
kerndeint:
    A bad deinterlacer.
lavc:
    For DVB output devices. We removed that support.
lavcdeint:
    A bad deinterlacer, was already deprecated.
    Still available as --vf=pp=fd.
mcdeint:
    A broken deinterlacer that uses lavc internals.
ow:
    Very slow, barely any quality benefit over "hqdn3d".
palette:
    Done by "scale".
perspective:
    Files with incorrect perspective are extremely rare. About the
    only real-world use for this is keystone correction, which is
    usually done in hardware by the projector or by graphics
    drivers/compositors.
pp7:
    Another useless postprocessing filter with bad and complicated code.
    Use libpostprocess with "pp" instead.
qp:
    Useless.
remove-logo:
    Redundant with delogo, which is better and more practical.
rgbtest:
    Useless.
sab, smartblur, boxblur:
    Blur filters, redundant to "unsharp".
softskip:
    Does nothing.
spp, fspp, uspp:
    Useless postprocessing filters. "spp" needs ffmpeg internals.
    "fspp" is the optimized version of the "spp" filter (???), while
    "uspp" is the slow version (????).
    Use libpostprocess with "pp" instead.
telecine:
    Evil and useless. Available as dlopen filter for testing
    purposes.
test:
    Useless.
tfields:
    Useless, probably.
tile:
    Questionable use. Available as dlopen filter.
tinterlace:
    Evil and useless.
yuvcsp:
    Probably useless.
yvu9:
    Redundant with "scale".

Also remove the following left-over files: vd_null.c, vqf.h

1 files changed, 0 insertions, 332 deletions

diff --git a/libmpcodecs/vf_tile.c b/libmpcodecs/vf_tile.c
deleted file mode 100644
index 0b5dac1559..0000000000
--- a/libmpcodecs/vf_tile.c
+++ /dev/null
@@ -1,332 +0,0 @@
-/*
- * filter to tile a serie of image in a single, bigger, image
- *
- * The parameters are:
- *
- *    xtile:  number of tile on the x axis (5)
- *    ytile:  number of tile on the y axis (5)
- *    xytile: when write the image, it can be different then xtile * ytile
- *            (for example you can write 8 * 7 tile, writing the file every
- *            50 frame, to have one image every 2 seconds @ 25 fps ).
- *    start:  pixel at the start (x/y), default 2
- *    delta:  pixel between 2 tile, (x/y), default 4
- *
- * For example a valid command line is:
- *    ... -vf tile=10:5:-1:4:8 ...
- * that make images of 10 * 5 tiles, with 4 pixel at the beginning and
- * 8 pixel between tiles.
- *
- * The default command is:
- *    ... -vf tile=5:5:25:2:4
- *
- * If you omit a parameter or put a value less then 0, the default is used.
- *    ... -vf tile=10:5::-1:10
- *
- * You can also stop when you're ok
- *    ... -vf tile=10:5
- * (and this is probably the option you will use more often ...)
- *
- * Probably is good to put the scale filter before the tile :-)
- *
- * copyright (c) 2003 Daniele Forghieri ( guru@digitalfantasy.it )
- *
- * This file is part of MPlayer.
- *
- * MPlayer is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * MPlayer is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with MPlayer; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-// strtoi memcpy_pic
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-
-#include "config.h"
-#include "mp_msg.h"
-#include "cpudetect.h"
-
-#include "img_format.h"
-#include "mp_image.h"
-#include "vf.h"
-
-#include "libvo/fastmemcpy.h"
-
-/* private data */
-struct vf_priv_s {
-    /* configuration data */
-    /* Number on hor/ver tiles */
-    int  xtile;
-    int  ytile;
-    /* When write the whole frame (default = xtile * ytile) */
-    int  xytile;
-    /* pixel at start / end (default = 4) */
-    int  start;
-    /* pixel between image (default = 2) */
-    int  delta;
-//    /* Background color, in destination format */
-//    int  bkgSet;
-
-    /* Work data */
-    int  frame_cur;
-    double start_pts;
-};
-
-
-static int config(struct vf_instance *vf,
-                  int width, int height, int d_width, int d_height,
-	          unsigned int flags, unsigned int outfmt){
-
-    struct vf_priv_s  *priv;
-    int               xw;
-    int               yh;
-
-    /* Calculate new destination size */
-    priv = vf->priv;
-    xw = priv->start * 2 +
-        priv->xtile * width +
-        (priv->xtile - 1) * priv->delta;
-    yh = priv->start * 2 +
-        priv->ytile * height +
-        (priv->ytile - 1) * priv->delta;
-
-    mp_msg(MSGT_VFILTER,MSGL_V,"vf_tile:config size set to %d * %d\n", xw, yh);
-
-    return vf_next_config(vf, xw, yh, xw, yh, flags, outfmt);
-}
-
-/* Filter handler */
-static int put_image(struct vf_instance *vf, mp_image_t *mpi, double pts)
-{
-    mp_image_t        *dmpi;
-    struct vf_priv_s  *priv;
-    int               t;
-    int               xw;
-    int               yh;
-    int               xi;
-    int               yi;
-    int               by;
-    int               dw;
-
-    /* Calculate new size */
-    priv = vf->priv;
-    xw = priv->start * 2 +
-        priv->xtile * mpi->w +
-        (priv->xtile - 1) * priv->delta;
-    yh = priv->start * 2 +
-        priv->ytile * mpi->h+
-        (priv->ytile - 1) * priv->delta;
-
-    /* Get the big image! */
-    dmpi=vf_get_image(vf->next, mpi->imgfmt,
-                      MP_IMGTYPE_STATIC, MP_IMGFLAG_ACCEPT_STRIDE,
-                      xw, yh);
-
-    /* bytes x pixel & bytes x line */
-    if (mpi->flags & MP_IMGFLAG_PLANAR) {
-        by = 1;
-        dw = mpi->w;
-    }
-    else {
-        by = (mpi->bpp + 7) / 8;
-        dw = mpi->w * by;
-    }
-    /* Index position */
-    t = priv->frame_cur % priv->xytile;
-//    if ((t == 0) && (bkg != 0)) {
-//        /* First frame, delete the background */
-//
-//    }
-    if (t == 0)
-        priv->start_pts = pts;
-
-    /* Position of image */
-    xi = priv->start + (mpi->w + priv->delta) * (t % priv->xtile);
-    yi = priv->start + (mpi->h + priv->delta) * (t / priv->xtile);
-
-    /* Copy first (or only) plane */
-    memcpy_pic( dmpi->planes[0] + xi * by + yi * dmpi->stride[0],
-                mpi->planes[0],
-                dw,
-                mpi->h,
-                dmpi->stride[0],
-                mpi->stride[0]);
-
-    if (mpi->flags & MP_IMGFLAG_PLANAR) {
-        /* Copy the other 2 planes */
-        memcpy_pic( dmpi->planes[1] + (xi >> mpi->chroma_x_shift) + (yi >> mpi->chroma_y_shift) * dmpi->stride[1],
-                    mpi->planes[1],
-                    mpi->chroma_width,
-                    mpi->chroma_height,
-                    dmpi->stride[1],
-                    mpi->stride[1]);
-         memcpy_pic( dmpi->planes[2] + (xi >> mpi->chroma_x_shift) + (yi >> mpi->chroma_y_shift) * dmpi->stride[2],
-                    mpi->planes[2],
-                    mpi->chroma_width,
-                    mpi->chroma_height,
-                    dmpi->stride[2],
-                    mpi->stride[2]);
-    }
-
-    /* Increment current frame */
-    ++priv->frame_cur;
-
-    if (t == priv->xytile - 1)  {
-        /* Display the composition */
-        dmpi->width  = xw;
-        dmpi->height = yh;
-        return vf_next_put_image(vf, dmpi, priv->start_pts);
-    }
-    else {
-        /* Skip the frame */
-        return 0;
-    }
-}
-
-static void uninit(struct vf_instance *vf)
-{
-    /* free local data */
-    free(vf->priv);
-}
-
-/* rgb/bgr 12->32 supported & some Yxxx */
-static int query_format(struct vf_instance *vf, unsigned int fmt)
-{
-	switch (fmt) {
-        /* rgb 12...32 bit */
-        case IMGFMT_RGB12:
-        case IMGFMT_RGB15:
-	case IMGFMT_RGB16:
-	case IMGFMT_RGB24:
-        case IMGFMT_RGB32:
-        /* bgr 12...32 bit */
-        case IMGFMT_BGR12:
-	case IMGFMT_BGR15:
-	case IMGFMT_BGR16:
-	case IMGFMT_BGR24:
-        case IMGFMT_BGR32:
-        /* Various Yxxx Formats */
-        case IMGFMT_444P:
-        case IMGFMT_422P:
-        case IMGFMT_411P:
-        case IMGFMT_YUY2:
-        case IMGFMT_YV12:
-        case IMGFMT_I420:
-        case IMGFMT_YVU9:
-        case IMGFMT_IF09:
-        case IMGFMT_IYUV:
-		return vf_next_query_format(vf, fmt);
-	}
-	return 0;
-}
-
-/* Get an integer from the string pointed by s, adjusting s.
- * If the value is less then 0 def_val is used.
- * Return 0 for ok
- *
- * Look below ( in vf_open(...) ) for a use ...
- */
-static int parse_int(char **s, int *rt, int def_val)
-{
-
-    int     t = 0;
-
-    if (**s) {
-        /* Get value (dec, hex or octal) */
-        t = strtol( *s, s, 0 );
-
-        /* Use default */
-        if (t < 0) {
-            t = def_val;
-        }
-
-        if (**s == ':') {
-            /* Point to next character (problably a digit) */
-            ++(*s);
-        }
-        else if (**s != '\0') {
-            /* Error, we got some wrong char */
-            return 1;
-        }
-    }
-    else {
-        t = def_val;
-    }
-
-    *rt = t;
-    return 0;
-
-}
-
-/* Main entry funct for the filter */
-static int vf_open(vf_instance_t *vf, char *args)
-{
-    struct vf_priv_s *p;
-    int              er;
-
-    vf->put_image    = put_image;
-    vf->query_format = query_format;
-    vf->config       = config;
-    vf->uninit       = uninit;
-    vf->default_reqs = VFCAP_ACCEPT_STRIDE;
-    /* Private data */
-    vf->priv = p = calloc(1, sizeof(struct vf_priv_s));
-    if (p == NULL) {
-        return 0;
-    }
-
-    if (args == NULL) {
-        /* Use the default */
-        args = "";
-    }
-    /* Parse all the arguments */
-    er =  parse_int( &args, &p->xtile,  5 );
-    er |= parse_int( &args, &p->ytile,  5 );
-    er |= parse_int( &args, &p->xytile, 0 );
-    er |= parse_int( &args, &p->start,  2 );
-    er |= parse_int( &args, &p->delta,  4 );
-//    er |= parse_int( &args, &p->bkgSet, 0 );
-
-    if (er) {
-        mp_tmsg(MSGT_VFILTER, MSGL_ERR, "[VF_FRAMESTEP] Error parsing argument.\n");
-        return 0;
-    }
-    /* Load some default */
-    if ((p->xytile <= 0) || (p->xytile > p->xtile * p->ytile)) {
-        p->xytile = p->xtile * p->ytile;
-    }
-
-    /* Say what happen: use mp_msg(...)? */
-    if ( mp_msg_test(MSGT_VFILTER,MSGL_V) ) {
-        printf("vf_tile: tiling %d * %d, output every %d frames\n",
-               p->xtile,
-               p->ytile,
-               p->xytile);
-        printf("vf_tile: start pixel %d, delta pixel %d\n",
-               p->start,
-               p->delta);
-//      printf("vf_tile: background 0x%x\n",
-//             p->bkgSet);
-    }
-    return 1;
-}
-
-const vf_info_t vf_info_tile = {
-    "Make a single image tiling x/y images",
-    "tile",
-    "Daniele Forghieri",
-    "",
-    vf_open,
-    NULL
-};