summaryrefslogtreecommitdiffstats
path: root/video
Commit message (Collapse)AuthorAgeFilesLines
* video: remove swapped-endian image format aliaseswm42014-11-055-175/+73
| | | | | Like the previous commit, this removes names only, not actual support for these formats.
* vo_wayland: don't use endian-specific defineswm42014-11-051-18/+22
| | | | | | | | | | | | Instead, use the native-endian alias, and switch the wayland format depending on the target platform's endian. This drops support for swapped-endian formats, but I think that is ok. Not only are the affected formats rather ancient and backwards, but using swapped formats probably does not make any sense for performance either. Untested.
* video: remove aliases for some rarely referenced image formatswm42014-11-052-82/+0
| | | | | | | | | These formats are still supported; you just can't reference them via a defined constants directly. They are now handled via the generic passthrough. (If you want to use such a format, you either have to add the entry back, or use AV_PIX_FMT_* directly.)
* video: add image format test programwm42014-11-051-0/+63
|
* video: passthrough unknown AVPixelFormatswm42014-11-053-1/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a rather radical change: instead of maintaining a whitelist of FFmpeg formats we support, we automatically support all formats. In general, a format which doesn't have an explicit IMGFMT_* name will be converted to a known format through libswscale, or will be handled by code which can treat pixel formats in a generic way using the pixel format description, like vo_opengl. AV_PIX_FMT_UYYVYY411 is a special-case. It's packed YUV with chroma subsampling by 4 in both directions. Its component order is documented as "Cb Y0 Y1 Cr Y2 Y3", meaning there's one UV sample for 4 Y samples. This means each pixel uses 1.5 bytes (4 pixels have 1 UV sample, so 4 bytes + 2 bytes). FFmpeg can actually handle this format with its generic mechanism in an extremely awkward way, but it doesn't work for us. Blacklist it, and hope no similar formats will be added in the future. Currently, the AV_PIX_FMT_*s allowed are limited to a numeric value of 500. More is not allowed, and there are some fixed size arrays that need to contain any possible format (look for IMGFMT_END dependencies). We could have this simpler by replacing IMGFMT_* with AV_PIX_FMT_* through the whole codebase. But for now, this is better, because we can compensate for formats missing in Libav or older FFmpeg versions, like AV_PIX_FMT_RGB0 and others.
* video: handle endian detection in a more generic waywm42014-11-051-7/+21
| | | | | | | | | | | | | FFmpeg has only a AV_PIX_FMT_FLAG_BE flag, not a LE one, which causes problems for us: we want to have the LE flag too, so code can actually detect whether a format is non-native endian. Basically, we want to reconstruct the LE/BE suffix all AV_PIX_FMT_*s have. Doing this is hard due to the (messed up) way AVPixFmtDescriptor works. The worst is AV_PIX_FMT_RGB444: this group of formats describe an endian-independent access (since no component actually spans 2 bytes, you only need byte accesses with a fixed offset), so we have to go through some pain.
* video: refuse to allocate image data for hwaccel formatswm42014-11-051-1/+1
| | | | Makes no sense.
* video: get hwaccel flag from pixdescwm42014-11-052-5/+8
|
* vo_opengl: minimal EGL on X11 supportwm42014-11-043-0/+171
| | | | | | Pretty useless and only good for testing. Does not include any form of GLES support.
* x11: rely on the Atom cachewm42014-11-032-15/+9
| | | | | XInternAtom() has a 64 entry hash table to avoid network accesses. Rely on this cache, instead of caching these manually.
* command: add window-minimized property (X11 only)wm42014-11-023-1/+28
| | | | | | More or less requested by #1237. Should be simple to extend this to other backends.
* command: make window-scale property observablewm42014-11-0211-0/+45
| | | | | | | | | | | | Add a generic mechanism to the VO to relay "extra" events from VO to player. Use it to notify the core of window resizes, which in turn will be used to mark all affected properties ("window-scale" in this case) as changed. (I refrained from hacking this as internal command into input_ctx, or to poll the state change, etc. - but in the end, maybe it would be best to actually pass the client API context directly to the places where events can happen.)
* cocoa: fix fullscreen delay when pausedStefano Pigozzi2014-11-011-2/+2
| | | | | | NSDisableScreenUpdates came to hunt me in the end and when mpv was paused, it did wait for a frame that never came (because of interaction with the live resizing code)!
* build: remove bundle support from wafStefano Pigozzi2014-11-011-0/+1
| | | | Use TOOLS/osxbundle.py instead. It's just better and less hacky.
* vo_opengl: draw OSD twice in 3D mode casewm42014-10-293-7/+57
| | | | | | | | | | | | | Apparently this is needed for correct 3D mode subtitles. In general, it seems you need to duplicate the whole "GUI", so it's done for all OSD elements. This doesn't handle the "duplication" of the mouse pointer. Instead, the mouse can be used for the top/left field only. Also, it's possible that we should "compress" the OSD in the direction it's duplicated, but I don't know about that. Fixes #1124, at least partially.
* cocoa: fix small leakStefano Pigozzi2014-10-271-0/+1
|
* libmpv: cocoa: fix view leak on uninitStefano Pigozzi2014-10-271-4/+6
| | | | | The code was lacking a -removeFromSuperview call which resulted in a leak on our part if the parent view in the client was not released.
* x11: fix display FPS detection for interlaced modeswm42014-10-271-1/+6
| | | | | | | | | In interlaced modes, we output fields, not complete frames, so the framerate doubles. The method to calculate this was borrowed from xrandr code. Hopefully fixes #1224.
* dxva2: use gpu_memcpy with unmatched stridesJames Ross-Gowan2014-10-271-8/+29
| | | | Like memcpy_pic, this checks if the strides match first.
* dxva2: fix copying surfaces with different strideJames Ross-Gowan2014-10-271-10/+18
|
* dxva2: fix crash on initialization failurewm42014-10-261-0/+2
| | | | If dxva2_init() fails, dxva2_uninit() will be called twice.
* dxva2: gpu_memcpy: fix build for GCC 4.8.3James Ross-Gowan2014-10-261-3/+10
|
* vo_direct3d: support nv12/nv21 directlywm42014-10-261-0/+8
|
* video: clarify what IMFMT_DXVA2 iswm42014-10-261-1/+1
|
* dxva2: use optimized memcpyJames Ross-Gowan2014-10-262-11/+164
| | | | | | At least on my machine, reading back the frame with system memcpy is slower than just using software rendering. Use the optimized gpu_memcpy from LAV to speed things up.
* video: initial dxva2 supportwm42014-10-255-1/+614
| | | | | Shamelessly stolen from ffmpeg. It probably doesn't work - you can debug it yourself.
* cocoa: perform VOCTRL_SET_UNFS_WINDOW_SIZE asyncronouslyStefano Pigozzi2014-10-241-3/+6
| | | | | | | | Apparently if resizing a NSWindow from a secondary thread Cocoa will automatically protect itself using NSViewHierarchyLock and in our case, cause a deadlock. Fixes #1210
* Set thread name for debuggingwm42014-10-192-0/+6
| | | | | | | | | | Especially with other components (libavcodec, OSX stuff), the thread list can get quite populated. Setting the thread name helps when debugging. Since this is not portable, we check the OS variants in waf configure. old-configure just gets a special-case for glibc, since doing a full check here would probably be a waste of effort.
* cocoa: reintroduce async resizeStefano Pigozzi2014-10-187-9/+71
| | | | | | | After removing synchronous libdispatch calls, this looks like it doesn't deadlock anymore. I also experimented with pthread_mutex_trylock liek wm4 suggested, but it leads to some annoying black flickering. I will fallback to that only if some new deadlocks are discovered.
* Revert "cocoa: perform init and uninit synchronously"Stefano Pigozzi2014-10-181-1/+3
| | | | This reverts commit a0ac8b6331d345748d415cf71affbe7a90e336a6.
* win32: clear window handle on destructionwm42014-10-171-0/+1
| | | | | | As I understand, otherwise, the code will try to destroy the same window again in the cleanup part of the gui_thread(), which makes no sense and is potentially dangerous.
* win32: get rid of mp_stat in the normal source codewm42014-10-171-1/+1
| | | | | | | | | | | mp_stat() instead of stat() was used in the normal code (i.e. even on Unix), because MinGW-w64 has an unbelievable macro-mess in place, which prevents solving this elegantly. Add some dirty workarounds to hide mp_stat() from the normal code properly. This now requires replacing all functions that use the struct stat type. This includes fstat, lstat, fstatat, and possibly others. (mpv currently uses stat and fstat only.)
* cocoa: allow mouse events to bubble up with no-input-cursorStefano Pigozzi2014-10-173-24/+114
| | | | | Previously we didn't report events to the core, but still prevented the events to travel on the responder chain.
* vo_opengl: fix wrong commentswm42014-10-161-2/+2
| | | | | | The previous commit was actually incorrect, and the change had absolutely no effect. The two formats are (fortunately) the same. I'm probably too tired.
* vo_opengl: fix theoretical format mismatch issuewm42014-10-161-4/+4
| | | | | | | | | This would have been wrong for hw decoders which pass us NV12 or NV21. The format the GL shader filter chain gets is stored in p->image_desc, while p->image_format still contains the "real" input format (which in case of hw decoding is an opsque hw accel format). Since no hw decoder did this, this is really just a theoretical fix and doesn't fix any actual bugs.
* cocoa: perform init and uninit synchronouslyStefano Pigozzi2014-10-161-3/+1
| | | | | This is slightly safer and without the resize redraw, should not cause any deadlock.
* vf_vapoursynth: add debug message when returning error from GetFramewm42014-10-131-0/+1
| | | | | Some filters still (or will) behave badly on these errors, so explicitly log when it happens.
* x11: don't wait for asynchronous X resizing with window-scalewm42014-10-131-3/+4
| | | | | | | | | | | | | | | Instead of letting the window-scale property return the old value until X11 actually executed the resize, just set the new assumed internal window size immediately. This avoids a "lag" between setting and reading the window-scale property, like OSD controls typically do. Remove the additional calls from vo_x11_highlevel_resize() - they're pointless and slightly wrong, and resize events will take care of updating these things correctly anyway. Fixes #1176. ("window-scale" works via VOCTRL_[S|G]ET_UNFS_WINDOW_SIZE.)
* vf_vapoursynth: don't error if invoke() doesn't return a clipwm42014-10-121-3/+2
| | | | | Not all functions are for creating filters. Consider for example LoadPlugin.
* vf_vapoursynth: resolve paths relative to home/configwm42014-10-121-0/+3
| | | | | This affects the script filename passed to the filter. Resolve "~" (and some other variants) as described in the "Paths" section of mpv.rst.
* gl_x11: distinguish missing GLX and too old GLX versionswm42014-10-121-3/+5
| | | | | | This probably led to confusing output. CC: @mpv-player/stable
* vf_vapoursynth: add standalone Lua scriptingwm42014-10-122-1/+262
|
* vf_vapoursynth: abstract scripting backendwm42014-10-121-28/+87
| | | | | | In theory, vsscript should be doing it, but it's not there yet, neither did there seem to be any interest in making it flexible enough to handle more than 1 scripting language.
* libmpv/cocoa: allow clients to use mpv event systemStefano Pigozzi2014-10-122-25/+28
| | | | | | | | | | This allows mpv's view to take key and send events to mpv's core. To set key status correctly, clients must call -[NSWindow selectNextKeyView:] during reconfig on the main thread. All is 'documented' in the cocoabasic example. If someone knows a better way to handle giving key to the embedded view, let me know!
* cocoa: remove usage of Objective-C categoriesStefano Pigozzi2014-10-124-88/+37
| | | | | Objective-C categories need special linker flags from the user when statically linking (-ObjC LDFLAG), so make everyone's life simpler and remove them.
* vf_vapoursynth: return dummy frames if frames are requested during initwm42014-10-111-1/+12
| | | | | | An attempt at fixing #1168. I see black frames flashing, so it's certainly not perfect.
* vf_vapoursynth: factor stuffwm42014-10-111-13/+25
|
* vf_vapoursynth: when seeking, recreate only if it's already createdwm42014-10-111-1/+2
|
* x11: don't wait until window is destroyedwm42014-10-111-5/+0
| | | | | | | | | | This can hang if the window was destroyed externally (or that's what I suspect happens), and we somehow didn't receive the DestroyNotify event. I'm not sure why we wouldn't receive this event (since it should just be in the xlib event queue), but on the other hand there's no real need to wait for window destruction. This essentially reverts 97fc74e2.
* vf_vapoursynth: fail gracefully if filter init requests frameswm42014-10-111-0/+10
| | | | | | | | | | | | | | | | | Some VS filters will requests frames from their parent filters while they're initialized. Thy do this in a blocking manner, and initialization will not succeed until the frame request is satisfied. This deadlocked mpv, because we can feed frames to the filter only after initialization is finished. Return an error instead of deadlocking. Note that we (probably) can handle frames being requested during init fine, as long as the requests don't block initialization. But we can distinguish this situation, and a simple test seems to indicate VS usually doesn't do this. See #1168.
* Add some missing "const"swm42014-10-101-1/+1
| | | | | | | The one in msg.c was mistakenly removed with commit e99a37f6. I didn't actually test the change in ao_sndio.c (but obviously "ap" shouldn't be static).
* cocoa: post keydown and keyup events without event monitorStefano Pigozzi2014-10-093-0/+14
| | | | | Our code worked under the assumption that the event monitor is always active and we did remove the keydown and keyup overrides from our cocoa view.
* cocoa: fix 'uninitalized' accessStefano Pigozzi2014-10-091-9/+7
| | | | | I think this doesn't make a difference, since in Objective-C nil responds as a NullObject, but better not depend on this crappy language feature.
* x11: fix inverted conditionwm42014-10-091-2/+3
| | | | | | | Worryingly wrong. Fixes #1162. Also fix another issue (window title was set anyway), which was why I didn't notice this and testing it seemed to be fine.
* client API: rename --input-x11-keyboard to --input-vo-keyboardwm42014-10-091-1/+1
| | | | | Apparently we need this for Cocoa too. (The option was X11 specific in the hope that only X11 would need this hack.)
* vf_lavfi: proper rounding for lavfi->mpv aspect ratiowm42014-10-091-2/+3
| | | | Or so I think. Not like it matters anyway.
* cocoa: allow to embed into an arbitrary NSViewStefano Pigozzi2014-10-085-18/+33
| | | | | Basically add if guards on all the problematic features. I'm still thinking about a better way to handle this, but for the time being, this will do.
* vf_lavfi: fix compilation failurewm42014-10-081-1/+0
| | | | | | Apparently this fails to compile with clang6. Patch by someone else. CC: @mpv-player/stable
* x11: disable various features when embedding the windowwm42014-10-071-3/+5
|
* cocoa: try to fix sizing bugs on retina displaysStefano Pigozzi2014-10-061-2/+2
| | | | untested, no hardware.
* cocoa: fix mouse autohideStefano Pigozzi2014-10-051-1/+1
| | | | broken in 547b62f
* cocoa: remove a debug commentoStefano Pigozzi2014-10-051-1/+1
| | | | fixup previous commit
* cocoa: separate video view and events viewStefano Pigozzi2014-10-056-18/+90
|
* cocoa: fix fullscreen with bundleStefano Pigozzi2014-10-051-1/+1
|
* cocoa: readd some function callsStefano Pigozzi2014-10-051-1/+3
|
* cocoa: actually reset the event flagsStefano Pigozzi2014-10-051-0/+1
|
* cocoa: remove some useless flagsStefano Pigozzi2014-10-051-19/+10
|
* cocoa: disable some features when embedding in another windowStefano Pigozzi2014-10-051-23/+25
| | | | ontop, fullscreen and window title change to be precise
* cocoa: remove --fs-missioncontrolStefano Pigozzi2014-10-053-59/+4
| | | | | | | This is the first of a series of commits that will change the Cocoa way in a way that is easily embeddable inside parent views. To reach that point common code must avoid referencing the parent NSWindow since that could be the host application's window.
* cocoa: fix some pointer casts to be 32bit safeStefano Pigozzi2014-10-051-1/+1
| | | | credits: wm4
* cocoa/libmpv: allow to embed mpv GL view in another windowStefano Pigozzi2014-10-053-30/+81
| | | | | | | | | | | | | | | | | | | This is just temporary code but is a good base for future work (and baby steps are required for these changes). The 'final destination' is embedding the video view into any NSView but that requires some more work (the mechanism will be the same: pass the view's pointer casted to int64_t through -wid). For instance we will need to remove as much usage of the window instance as possible, and use nil guards where not possible. For this reason I will remove stuff like the mission control fullscreen feature (it's a cute feature but annoying to support and quite limited, go make your GUIs), and a way to lookup the current screen directly from the NSView absolute coordinates (this is needed for ICC detection mostly, and reporting back the screen to mpv's core). Moreover the current view.m will need to be separated into 2 views: the actual video view that will be embedded, and a parent view that will not be embedded and will be responsibile for tracking events.