| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The strange thing about this code was the shift parameter of the
prev_vs2 function. The parameter is used to handle timestamps before the
last vsync, since the % operator handles negative values incorrectly.
Most callers set shift to 0, and _usually_ pass a timestamp after the
last vsync. One caller sets it to 16, and can pass a timestamp before
the last timestamp.
The mystery is why prev_vs2 doesn't just compensate for the % operator
semantics in the most simple way: if the result of the operator is
negative, add the divisor to it. Instead, it adds a huge value to it
(how huge is influenced by shift). If shift is 0, the result of the
function will not be aligned to vsyncs.
I have no idea why it was written in this way. Were there concerns about
certain numeric overflows that could happen in the calculations? But I
can't think of any (the difference between ts and vc->recent_vsync_time
is usually not that huge). Or is there something more clever about it,
which is important for the timing code? I can't think of anything
either.
So scrap it and simplify it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_vdpau used a somewhat complicated and fragile mechanism to convert
the vdpau time to internal mpv time. This was fragile as in it couldn't
deal well with Mesa's (apparently) random timestamps, which can change
the base offset in multiple situations. It can happen when moving the
mpv window to a different screen, and somehow it also happens when
pausing the player.
It seems this mechanism to synchronize the vdpau time is not actually
needed. There are only 2 places where sync_vdptime() is used (i.e.
returning the current vdpau time interpolated by system time).
The first call is for determining the PTS used to queue a frame. This
also uses convert_to_vdptime(). It's easily replaced by querying the
time directly, and adding the wait time to it (rel_pts_ns in the patch).
The second call is pretty odd: it updates the vdpau time a second time
in the same function. From what I can see, this can matter only if
update_presentation_queue_status() is very slow. I'm not sure what to
make out of this, because the call merely queries the presentation
queue. Just assume it isn't slow, and that we don't have to update the
time.
Another potential issue with this is that we call VdpPresentationQueueGetTime()
every frame now, instead of every 5 seconds and interpolating the other
calls via system time. More over, this is per video frame (which can be
portantially dropped, and not per actually displayed frame. Assume this
doesn't matter.
This simplifies the code, and should make it more robust on Mesa. But
note that what Mesa does is obviously insane - this is one situation
where you really need a stable time source. There are still plenty of
race condition windows where things can go wrong, although this commit
should drastically reduce the possibility of this.
In my tests, everything worked well. But I have no access to a Mesa
system with vdpau, so it needs testing by others.
See github issues #520, #694, #695.
|
|
|
|
|
| |
This is needed to preserve the same path used when opening the cache file, and
correctly expands ~ when icc-cache is added to the mpv config file.
|
|
|
|
| |
Might help to debug certain problems with Mesa.
|
|
|
|
| |
Was broken in b0ee9334e.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds support for automatic selection of color profiles based on
the display where mpv is initialized, and automatically changes the color
profile when display is changed or the profile itself is changed from
System Preferences.
@UliZappe was responsible with the testing and implementation of a lot of this
commit, including the original implementation of `cocoa_get_icc_profile_path`
(See #594).
Fixes #594
|
|
|
|
| |
Probably.
|
|
|
|
|
|
|
|
|
| |
Reduce most dependencies on struct mp_csp_details, which was a bad first
attempt at dealing with colorspace stuff. Instead, consistently use
mp_image_params.
Code which retrieves colorspace matrices from csputils.c still uses this
type, though.
|
|
|
|
|
| |
The changes in vo_opengl.c are merely for adding the icc options to the
set of options than can be changed with the vo_cmdline command.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were some bad interactions with the OSC.
For one, dragging the OSC bar, and then moving the mouse outside of the
OSC (while mouse button still held) would suddenly initiate window
dragging. This was because win_drag_button1_down was not reset when
sending a normal mouse event, which means the window dragging code can
become active even after we've basically decided that the preceding
click didn't initiate window dragging.
Second, dragging the window and clicking on the OSC bar after that did
nothing. This was because no mouse button up event was sent to the core,
even though a mouse down event was sent. So make sure the key state is
erased with MP_INPUT_RELEASE_ALL.
|
|
|
|
| |
There's no reason to. This is basically a cosmetic change.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't check whether the WM supports _NET_WM_MOVERESIZE_MOVE, but
if it doesn't, nothing bad happens. There might be a race condition
when pressing a button, and then moving the mouse and releasing the
button at the same time; then the WM might get the message to initiate
moving the window after the mouse button has been released, in which
case the result will probably be annoying. This could possibly be fixed
by sending _NET_WM_MOVERESIZE_CANCEL on button release, but on the
other hand, we probably won't receive a button release event in this
situation, so ignore this problem.
The dragging is initiated only when moving the mouse pointer after a
click in order to reduce annoying behavior when the user is e.g.
doubleclicking.
Closes #608.
|
|
|
|
|
|
| |
It's not really needed to be public. Other code can just use mp_image.
The only disadvantage is that the other code needs to call an accessor
to get the VASurfaceID.
|
|
|
|
|
|
|
|
|
|
|
|
| |
Although I at first thought it would be better to have a separate
implementation for hwaccels because the difference to software images
are too large, it turns out you can actually save some code with it.
Note that the old implementation had a small memory management bug. This
got painted over in commit 269c1e1, but is hereby solved properly.
Also note that I couldn't test vf_vavpp.c (due to lack of hardware), and
I hope I didn't accidentally break it.
|
|
|
|
|
|
| |
They were used by ancient libavcodec versions. This also removes the
need to distinguish vdpau image formats at all (since there is only
one), and some code can be simplified.
|
| |
|
|
|
|
|
|
| |
The window doesn't recieve a WM_LBUTTONUP message after it's dragged,
probably because it's swallowed by the modal loop. To stop the button
from sticking, release it manually when the drag is complete.
|
|
|
|
|
|
| |
Mouse buttons can get stuck down if the button is pressed inside the
video window and released outside. Avoid this by capturing mouse input
when a button is pressed.
|
|
|
|
|
|
|
| |
This updates the logic for the new, somewhat unified behavior of SRGB
and 3DLUT since 34bf9be (not that it was particularly correct even that
change) and checks for the presence of corresponding extensions only in
the cases in which they're needed.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit:
- Changes some of the #define and variable names for clarification and
adds comments where appropriate.
- Unifies :srgb and :icc-profile, making them fit into the same step of
the decoding process and removing the weird interactions between both
of them.
- Makes :icc-profile take precedence over :srgb (to significantly reduce
the number of confusing and useless special cases)
- Moves BT709 decompanding (approximate or actual) to the shader in all
cases, making it happen before upscaling (instead of the old 0.45
gamma function). This is the simpler and more proper way to do it.
- Enables the approx gamma function to work with :srgb as well due to
this (since they now share the gamma expansion code).
- Renames :icc-approx-gamma to :approx-gamma since it is no longer tied
to the ICC options or LittleCMS.
- Uses gamma 2.4 as input space for the actual 3DLUT, this is now a
pretty arbitrary factor but I picked 2.4 mainly because a higher pure
power value here seems to produce visually better results with wide
gamut profiles, rather then the previous 1.95 or BT.709.
- Adds the input gamma space to the 3dlut cache header in case we change
it more in the future, or even make it user customizable (though I
don't see why the latter would really be necessary).
- Fixes the OSD's gamma when using :srgb, which was previously still
using the old (0.45) approximation in all cases.
- Updates documentation on :srgb, it was still mentioning the old
behavior from circa a year ago.
This commit should serve to both open up and make the CMS/shader code much
more accessible and less confusing/error-prone and simultaneously also
improve the performance of 3DLUTs with wide gamut color spaces.
I would liked to have made it more modular but almost all of these
changes are interdependent, save for the documentation updates.
Note: Right now, the "3DLUT takes precedence over SRGB" logic is just
coded into gl_lcms.c's compile_shaders function. Ideally, this should be
done earlier, when parsing the options (by overriding the actual
opts.srgb flag) and output a warning to the user.
Note: I'm not sure how well this works together with real-world
subtitles that may need to be color corrected as well. I'm not sure
whether :approx-gamma needs to apply to subtitles as well. I'll need to
test this on proper files later.
Note: As of now, linear light scaling is still intrinsically tied to
either :srgb or :icc-profile. It would be thinkable to have this as an
extra option, :linear-scaling or similar, that could be used with or
without the two color management options.
|
|
|
|
|
| |
This affects the OSD only when :srgb is enabled, this still used the old
gamma approximation of 2.22 previously.
|
|
|
|
|
|
|
|
|
|
| |
Since the AO will run in a thread, and there's lots of shared state with
encoding, we have to add locking.
One case this doesn't handle correctly are the encode_lavc_available()
calls in ao_lavc.c and vo_lavc.c. They don't do much (and usually only
to protect against doing --ao=lavc with normal playback), and changing
it would be a bit messy. So just leave them.
|
|
|
|
| |
Rename it to reinit and check if parts of the pool are already allocated.
|
|
|
|
| |
I think this is easier to follow.
|
|
|
|
|
| |
This makes sure the ICC cache is recomputed when the :icc-approx-gamma
option is changed, since it affects the output quite a lot.
|
|
|
|
|
|
|
|
|
|
|
|
| |
The previous version of the gamma suboption was pretty useless. It could
be used to disable delayed gamma enabling, which is a mechanism to avoid
having to adjust gamma in the shader by default.
Repurpose the suboption and allow setting an exact gamma value with it.
You can already override gamma with the --gamma option as well as the
gamma input property, but these use a weird curve to create the
impression of a linear perceived brightness change when changing the
value. This suboption now allows setting an exact gamma value.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This used to be absolute colorimetric, but relative colorimetric is a
saner default due to the arguments presented in issue #595.
A short summary: In general it doesn't affect much because our eyes
adapt to the white point either way, but if running in windowed mode it
would make the whites seem inconsistent/tinted. For fullscreen
projection it's also undesirable since it reduces the dynamic range
without much benefit (again, since our eyes adapt either way) and it
also breaks calibration against ambient lighting.
This shouldn't change much, since most profile types that aren't 3DLUTs
aren't capable of either of those transforms, and most displays are
calibrated against D65 (same as BT.709 source) either way.
|
|
|
|
|
|
| |
This uses the value of 1.95 as an approximation for the exact gamma
curve, which replicates the behavior of popular video software including
anything in the Apple ecosystem, as per issue #534.
|
|
|
|
|
| |
GL_RGB16 is definitely not a required format, after review of the
OpenGL 3.3 spec. Most HW doesn't have native support for RGB16 anyway.
|
| |
|
|
|
|
|
| |
Windows will automatically choose the correct icon size if this field is
unset.
|
| |
|
|
|
|
|
|
|
|
| |
This is the same issue as addressed by 257d9f1, except this time for
the :srgb option as well. (257d9f1 only addressed :icc-profile)
The conditions of the srgb_compand mix() call are also flipped to
prevent an off-by-one error.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
I was unhappy with the old way of handling buffers, especially resizing. But my
original plan to use wl_shm_pool_resize wasn't as good as I initially thought.
I might get back to it.
With the new buffer pools it now possible to select triple buffering. Also the
buffer pools are also needed for the upcoming subsurfaces for osd and subtitles.
I hope this change was worth it.
|
|
|
|
| |
With the new xdg_shell the problem will be no gone by itself.
|
|
|
|
|
| |
The correct value is 0.081, not 0.18. The scale factor also needed
slight adjustment due to the order of operations.
|
|
|
|
| |
Some drivers do not supply timestamps, use old timestamp in these conditions.
|
|
|
|
|
| |
When a time sync happens the last sync time is the minimum time that can be
used for presentation.
|
|
|
|
|
|
| |
I could not see any difference whatsoever, but for usage with a 3DLUT
there's zero performance difference so we might as well follow the spec to
the letter.
|
|
|
|
|
|
|
|
| |
Legacy GL context creation (glXCreateContext) explicitly requires a X
visual, while the modern one (glXCreateContextAttribsARB) does not for
some reason. So fail only on the legacy code path if we don't find a
visual. Note that vo_x11_config_vo_window() will select a default visual
if a NULL visual is passed to it.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This fixes issue #504. For some reason, glXChooseFBConfig() will return
a fbconfig with no associated visual. (I'm not sure if this allowed.
They don't always have a visual, but since GLX_X_RENDERABLE is set
and GLX_DRAWABLE_TYPE is (implicitly) set to GLX_WINDOW_BIT, why would
there be no visual?)
Even worse, a test program seems to show that a 16 bit fbconfig is
selected (instead of 24/32 bit), which doesn't sound nice at all. Since
there _are_ better fbconfigs available, glXChooseFBConfig() should
normally sort them by quality, and return the better ones first. It's
worth noting that this function should also prefer GLX_TRUE_COLOR
over anything else, although this comes last in the sort order.
Whatever is going on, requesting GLX_X_VISUAL_TYPE with GLX_TRUE_COLOR
seems to fix it.
|
|
|
|
|
| |
Change minimum version to 1.3 and remove the version checking in the source
code.
|
|
|
|
|
|
|
| |
This was done incorrectly in the previous commit: the fallback size used
the window size as requested with the first config call, which is the
size of the hidden window in the vo_opengl case. (That damn hidden
window again...)
|
|
|
|
|
|
|
|
|
| |
This code essentially does nothing. As far as I could find out, this
actually used to do something. Then it was removed with commit efe7c39f,
leaving some leftover code that didn't do anything useful. This happened
12 years ago!
Also remove a commented debug printf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_opengl creates a hidden X11 window to probe the OpenGL context. It
must do that before creating a visible window, because VO creation and
VO config are separate phases.
There's a race condition involving the hidden window: when starting with
--fs, and then leaving fullscreen, the unfullscreened window is
sometimes set to the aspect ratio of the hidden window. I'm not sure why
the window size itself uses the correct size (but corrupted by the wrong
aspect), but that's perhaps because the window manager is free to ignore
the size hint while honoring the aspect, or something equally messed up.
It turns out this happens because x11_common.c thinks the size of the
hidden window is the size of the unfullscreened window. This in turn
happens because vo_x11_update_geometry() reads the size of the hidden
window when called in vo_x11_fullscreen() (called from
vo_x11_config_vo_window()) when mapping the fullscreen window. At that
point, the window could be mapped, but not necessarily. If it's not
mapped, it will get the size of the unfullscreened window... I think.
One could fix this by actively waiting until the window is mapped. Try
to pick a less hacky approach instead, and never read the window size
until MapNotify is received.
vo_x11_create_window() needs a hack, because we'd possibly set the VO's
size to 0, resulting e.g. in vdpau to fail initialization. (It'll print
error messages until a proper resize is received.)
|
|
|
|
| |
No real problem.
|
|
|
|
|
|
| |
RGB565 is one of the fastest and most supported formats on low end consumer
devices, but ffmpeg spams warning when using it. Make it opt-in instead of
opt-out.
|
| |
|
|
|
|
|
|
| |
The problem seems to have solved itself. I guess the previous changes to
resizing and commit ba101ab made this possible. Consider me happy for removing
that crap.
|
|
|
|
|
|
| |
Still untested, because now it crashes inside of libSDL for unknown
reasons. (This also happens with mpv git from yesterday - probably an
installation problem, or SDL doing weird things it shouldn't be doing.)
|
| |
|
|
|
|
|
|
|
| |
The main difference between the old and new callbacks is that the old
callbacks required passing the window size, which is and always was very
inconvenient and confusing, since the window size is already in
vo->dwidth and vo->dheight.
|
|
|
|
|
| |
Not strictly needed, but probably saves us pain the next time
ffmpeg mess up their headers.
|
| |