| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were some bad interactions with the OSC.
For one, dragging the OSC bar, and then moving the mouse outside of the
OSC (while mouse button still held) would suddenly initiate window
dragging. This was because win_drag_button1_down was not reset when
sending a normal mouse event, which means the window dragging code can
become active even after we've basically decided that the preceding
click didn't initiate window dragging.
Second, dragging the window and clicking on the OSC bar after that did
nothing. This was because no mouse button up event was sent to the core,
even though a mouse down event was sent. So make sure the key state is
erased with MP_INPUT_RELEASE_ALL.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't check whether the WM supports _NET_WM_MOVERESIZE_MOVE, but
if it doesn't, nothing bad happens. There might be a race condition
when pressing a button, and then moving the mouse and releasing the
button at the same time; then the WM might get the message to initiate
moving the window after the mouse button has been released, in which
case the result will probably be annoying. This could possibly be fixed
by sending _NET_WM_MOVERESIZE_CANCEL on button release, but on the
other hand, we probably won't receive a button release event in this
situation, so ignore this problem.
The dragging is initiated only when moving the mouse pointer after a
click in order to reduce annoying behavior when the user is e.g.
doubleclicking.
Closes #608.
|
|
|
|
|
|
|
| |
This was done incorrectly in the previous commit: the fallback size used
the window size as requested with the first config call, which is the
size of the hidden window in the vo_opengl case. (That damn hidden
window again...)
|
|
|
|
|
|
|
|
|
| |
This code essentially does nothing. As far as I could find out, this
actually used to do something. Then it was removed with commit efe7c39f,
leaving some leftover code that didn't do anything useful. This happened
12 years ago!
Also remove a commented debug printf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_opengl creates a hidden X11 window to probe the OpenGL context. It
must do that before creating a visible window, because VO creation and
VO config are separate phases.
There's a race condition involving the hidden window: when starting with
--fs, and then leaving fullscreen, the unfullscreened window is
sometimes set to the aspect ratio of the hidden window. I'm not sure why
the window size itself uses the correct size (but corrupted by the wrong
aspect), but that's perhaps because the window manager is free to ignore
the size hint while honoring the aspect, or something equally messed up.
It turns out this happens because x11_common.c thinks the size of the
hidden window is the size of the unfullscreened window. This in turn
happens because vo_x11_update_geometry() reads the size of the hidden
window when called in vo_x11_fullscreen() (called from
vo_x11_config_vo_window()) when mapping the fullscreen window. At that
point, the window could be mapped, but not necessarily. If it's not
mapped, it will get the size of the unfullscreened window... I think.
One could fix this by actively waiting until the window is mapped. Try
to pick a less hacky approach instead, and never read the window size
until MapNotify is received.
vo_x11_create_window() needs a hack, because we'd possibly set the VO's
size to 0, resulting e.g. in vdpau to fail initialization. (It'll print
error messages until a proper resize is received.)
|
|
|
|
|
|
|
|
|
| |
Doesn't make any sense anymore. X11 (which was mentioned in the manpage)
autodetects it, and everything else ignored the option values.
Since for incomprehensible reasons the backends and vo.c still need to
exchange information about the screensize using the option fields,
they're not removed yet.
|
|
|
|
|
| |
This never made any real sense; the "backend" has to access vo->dx/dy
anyway.
|
|
|
|
|
|
|
|
| |
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
|
|
|
|
|
|
| |
Both X11 and Wayland support the same format for drag & drop operations
(text/uri-list), and the code for that was copied from x11_common.c to
wayland_common.c. Factor it out.
|
|
|
|
|
| |
event.c will be used to feed the input queue with 'global' events that don't
mesh well with the usual check_events path in mpv.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Drag and drop is pretty complicated (just note how the number of Atoms
in use almost doubles), so I'm not sure whether this works everywhere.
This has been written by looking at the specification [1] or what looks
like the specification, and some external example code [2]. (The latter
one has no code license, but we didn't copy any code.)
We completely ignore the "requirement" of the spec. that the filename
"must" include username and hostname, e.g. "file://user@host/path/file".
In theory, this is required because X is network transparent, but at
this point the so called network transparency is a complete joke, and
Konqueror for one didn't include hostnames in "file://" URIs.
Tested with konqueror as drop source.
[1] http://www.newplanetsoftware.com/xdnd/
[2] http://www.edwardrosten.com/code/dist/x_clipboard-1.1/paste.cc
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 877303aaa9111fc56a8e5edbeb439699acfe44c0.
The OpenGL 2.1 fallback for vo_opengl didn't work. Two things come
together: 1. trying to create an OpenGL 3.0 context will fail with
a GLXBadFBConfig error, and 2. X errors are fatal by default. Since
the reverted commit removed the X error handler, the mpv process was
killed, instead of continuing for the fallback.
(Note that this commit is not an exact inverse commit, since mp_msg
changed, but it does about the same thing.)
|
| |
|
|
|
|
|
|
|
|
|
| |
This has similar problems as the ALSA message callback, though in theory
we could use the Display handle to find the right mpv instance from the
global callback. It still wouldn't work if another library happens to
set the error handler at the same time. There doesn't seem much of an
advantage overriding the error handler (though it used to be required),
so remove it.
|
| |
|
|
|
|
|
|
|
|
|
| |
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
|
| |
|
|
|
|
|
|
|
|
|
| |
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds a new build system based on waf. configure and Makefile
are deprecated effective immediately and someday in the future they will be
removed (they are still available by running ./old-configure).
You can find how the choice for waf came to be in `DOCS/waf-buildsystem.rst`.
TL;DR: we couldn't get the same level of abstraction and customization with
other build systems we tried (CMake and autotools).
For guidance on how to build the software now, take a look at README.md
and the cross compilation guide.
CREDITS:
This is a squash of ~250 commits. Some of them are not by me, so here is the
deserved attribution:
- @wm4 contributed some Windows fixes, renamed configure to old-configure
and contributed to the bootstrap script. Also, GNU/Linux testing.
- @lachs0r contributed some Windows fixes and the bootstrap script.
- @Nikoli contributed a lot of testing and discovered many bugs.
- @CrimsonVoid contributed changes to the bootstrap script.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
|
|
|
|
|
|
| |
This is a bit more intuitive, since before, the window size was just set
to something random when setting the window-scale property during
fullscreen.
|
| |
|
|
|
|
|
|
|
|
| |
As preparation for resizing the window with input commands in the
following commit.
Since there are already so many functions which somehow resize the
window, add the word "highlevel" to the name of this new function.
|
|
|
|
|
|
|
|
|
|
| |
This stopped working when the code was changed to create a window even
if --wid is used.
It appears we can't create our own window in this case, because in X11
there is no difference between a window with the root window as parent,
and a window that is managed by the WM. So make this (kind of worthless)
special case use the root window itself.
|
|
|
|
|
| |
Tested with recent metacity; this code is not triggered anymore. The
code was added in 2003 and probably has been unused for years.
|
| |
|
|
|
|
| |
This is completely pointless, but it still somehow bugged me.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Trying to toggle the border during fullscreen (with "cycle border")
would leave the window stuck without border, and it couldn't be
restored. This was because vo_x11_decoration() always excepted to be
called when toggling the state, and thus confusing the contents of the
olddecor variable. Add got_motif_hints to hopefully prevent this.
Also, when changing the border, don't take fs in account. May break on
older/broken WMs, but all in all is in fact more robust and simpler,
because you do not need to update the border state manually when
returning from fullscreen.
|
|
|
|
|
| |
Apparently this fixes issues with Gnome, which has a smaller timeout.
See github issue #315.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This could cause the OSC to be displayed without mouse interaction: for
example, starting mpv with --fs, and putting the mouse to where the OSC
area is beforehand, would cause the OSC to appear and stay visible. We
don't want that. The simplest solution is not generating artificial
mouse move events from mouse enter events, because they make the OSC
think the mouse was actually moved.
Also see commit 0c7978c, where handling of mouse enter events was added.
This was supposed to fix certain corner cases, but they're not relevant
anymore due to changes in OSC behavior.
Commit 9777047 fixed this as well (by resetting the mouse state on
MOUSE_LEAVE), but all the behavior reverted with this commit as perhaps
a bad idea. It wasn't very robust, made it hard to distinguish real
events from artificial ones, and finally made the mouse cursor more
often visible than needed. (Now switching between workspaces doesn't
make the cursor visible again when switching to a fullscreened mpv.)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_x11 had a clever trick to implement a video equalizer: it requested a
DirectColor visual. This is a X11 mechanism which allows you to specify
a lookup table for each color channel. Effectively, this is a safe
override for the graphic card's gamma ramp. If X thinks the window
deserves priority over other windows in the system, X would temporarily
switch the gamma ramp so that DirectColor visuals can be displayed as
the application intends. (I'm not sure what the exact policy is, but in
practice, this meant the equalizer worked when the mouse button was
inside the window.)
But all in all, this is just lots of useless code for a feature that is
rarely ever useful. Remove it and use the libswscale equalizer instead.
(This comes without a cost, since vo_x11 already uses libswscale.)
One worry was that using DirectColor could have made it work better in
8-bit paletted mode. But this is not the case: there's no difference,
and in both cases, the video looks equally bad.
|
|
|
|
|
|
|
| |
Normally, we need this for Xutf8LookupString(). But we can just fall
back to XLookupString(). In fact, the code for this was already there,
the code was just never tested and was actually crashing when active
(see commit 2115c4a).
|
| |
|
|
|
|
|
|
| |
XOpenIM can fail to find a valid input method, in which case it
returns NULL. Passing a NULL pointer to XCreateIC would cause a
crash, so fail VO init before that happens.
|
|
|
|
|
|
|
|
|
|
|
| |
This is supposed to reduce the amount of useless error messages shown
during initialization of vo_opengl. If multiple backends are compiled,
usually only one of them will work. For example, on Linux both X and
Wayland backends can be compiled, but usually either Wayland or X is
running. Then, if Wayland is not running, but X is, trying to initialize
the Wayland backend should not spam the terminal with error messages.
Signed-off-by: Andreas Sinz <andreas.sinz@aon.at>
|
|
|
|
|
| |
Doesn't touch some parts, like the X11 error handler (which doesn't
allow setting a context pointer).
|
|
|
|
| |
I have no idea why it exists, as it's redundant to --(no-)mouse-movements.
|
|
|
|
|
|
|
|
|
| |
icon_size is the number of array items of type long, not bytes. Change
the type of icon_size to int, because size_t makes you think of byte
quantities too quickly.
As an unrelated change, change the (char *) cast to (unsigned char *),
because it matches the common XChangeProperty idiom better.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The png file added to etc/ are taken from the link mentioned in commit
303096b, except that they have been converted to 16 bit, sRGB (with
color profile info dropped, if there was one), and transparent pixels
reset for better compression.
The file x11_icon.bin is generated by gen-x11-icon.sh. I'm adding it to
the git repo directly, because the script requires ImageMagick, and we
don't want to make building even more complicated.
The way how this is done is basically a compromise between effort
required in x11_common.c and in gen-x11-icon.sh. Ideally, x11_icon.bin
would be directly in the format as required by _NET_WM_ICON, but trying
to write the binary width/height values from shell would probably be a
nightmare, so here we go.
The zlib code in x11_common.c is lifted from demux_mkv.c, with some
modifications (like accepting a gzip header, because I don't know how to
make gzip write raw compressed data).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If the mpv window is unfocus, clicking on the OSC should focus the
window (done by the window manager) and allow interaction with the OSC.
But somehow X sends a spurious LeaveNotify event, immediately followed
by an EnterNotify event. This happens at least with IceWM. The result is
that the OSC will disappear (due to receiving MOUSE_LEAVE). The OSC will
stay invisible, because EnterNotify isn't handled, and there's nothing
that could make the OSC appear again.
Solve this by handling EnterNotify. We cause a redundant MOUSE_MOVE
event to be sent, which triggers the code to make the OSC visible. We
have to remove the code from input.c, which ignores redundant mouse move
events.
Since the code ignoring redundant mouse move events is still needed on
Windows, move that code to w32_common.c. The need for this is documented
in the code, also see commit 03fd2fe. (The original idea was to save
some code by having this code in the core, but now it turns out that
this didn't quite work out.)
|
|
|
|
|
|
|
|
| |
These keys can be found on various "multimedia" and "internet" keyboard.
X defines many keycodes, so I'm not adding all, just what I found on my
own keyboard.
Other key codes can be added on request.
|
|
|
|
| |
Apply it after mapping.
|
|
|
|
|
|
|
|
| |
Disable the hack by default, because it's interfering with some more
modern WMs. MWM (Motif Window Manager) is probably pretty dead, but
we still allow enabling the old hack with "--fstype=mwm_hack".
See github issue #179.
|
|
|
|
| |
Followup commit. Fixes all the files references.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There was a MPOpts fullscreen field, a mp_vo_opts.fs field, and
VOFLAG_FULLSCREEN. Remove all these and introduce a
mp_vo_opts.fullscreen flag instead.
When VOs receive VOCTRL_FULLSCREEN, they are supposed to set the
current fullscreen mode to the state in mp_vo_opts.fullscreen. They
also should do this implicitly on config().
VOs which are capable of doing so can update the mp_vo_opts.fullscreen
if the actual fullscreen mode changes (e.g. if the user uses the
window manager controls). If fullscreen mode switching fails, they
can also set mp_vo_opts.fullscreen to the actual state.
Note that the X11 backend does almost none of this, and it has a
private fs flag to store the fullscreen flag, instead of getting it
from the WM. (Possibly because it has to deal with broken WMs.)
The fullscreen option has to be checked on config() to deal with
the -fs option, especially with something like:
mpv --fs file1.mkv --{ --no-fs file2.mkv --}
(It should start in fullscreen mode, but go to windowed mode when
playing file2.mkv.)
Wayland changes by: Alexander Preisinger <alexander.preisinger@gmail.com>
Cocoa changes by: Stefano Pigozzi <stefano.pigozzi@gmail.com>
|
|
|
|
| |
Now only the OSX and Wayland parts are using this.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Making key up events implicit was sort-of a nice idea, but it's too
tricky and unreliable and makes the key lookup code (interpret_keys())
hard to reason about. See e.g. previous commit for subtle bugs and
issues this caused.
Make key-up events explicit instead. Add key up events to all VOs.
Any time MP_KEY_STATE_DOWN is used, the matching key up event must
use MP_KEY_STATE_UP.
Rewrite the key lookup code. It should be simpler and more robust now.
(Even though the LOC increases, because the new code is less "compact".)
|
|
|
|
|
|
| |
Also, implement mouse leave events for X11. But evne on other
platforms, these events will be generated if mouse crosses a section's
mouse area boundaries within the mpv window.
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of implicitly changing the window title on config(), do it as
part of the new VOCTRL.
At first I wanted to make all VOs use the VOCTRL argument directly, but
on a second thought it appears vo_get_window_title() is much more useful
for some (namely, if the window is created lazily on first config()).
Not all VOs are changed. Wayland and OSX have to follow.
|
|
|
|
|
|
|
|
|
|
|
| |
|