| Commit message (Collapse) | Author | Age | Files | Lines |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This works around an issue in OpenBox: OpenBox apparently sizes the
normal window incorrectly if aspect ratio hints are set, and the window
size is off by 1 pixel. Then, when going fullscreen and leaving
fullscreen again, mpv sets the hints based on OpenBox' broken window
size, and as result, OpenBox sizes the window incorrectly and is off by
1 pixel again - so it's 2 pixels off in total. The error gets more
visible, the more often you toggle fullscreen mode.
Work this around by not setting the window hints if we don't need to.
Actually we only need to do this when the video is resized during
fullscreen, which happens rarely. Under normal circumstances, leaving
fullscreen mode requires that the WM restores the old state.
As such, this commit is not only a workaround, but actually a cleanup.
Note that we do need to set the hints when leaving fullscreen if the
window has resized: even though we set the hints in
vo_x11_highlevel_resize (called by vo_x11_config_vo_window), this
doesn't seem to have an effect (at least on IceWM), so we have to do it
after that.
Side note: ot seems commit 625ad57a strangely triggered the OpenBox
issue according to user reports; I'm not sure why.
|
|
|
|
|
| |
So any VOCTRL can be called at any time. Working towards removing all
these config_ok checks in vo.c.
|
|
|
|
|
|
|
| |
Before this commit, this was somehow polled (i.e. not the right way).
Also, selects the correct window when doing --wid=0 (which is another
weird special-case).
|
| |
|
|
|
|
|
|
|
|
|
| |
Enabling DPMS even though you disabled it globally is pretty unfriendly,
so don't do it. Instead, we only disable DPMS if it was enabled, and
only enable it if we disabled it ourselves.
The other way should never happen (disabling DPMS permanently), unless
mpv crashes during playback.
|
|
|
|
|
|
|
|
| |
Reduces some code-duplication.
Just call DPMSEnable/DPMSDisable, instead of DPMSForceLevel when
reenabling DPMS. "Force" sounds evil, and messing with DPMS is already
pretty evil. I'm not even sure that we should.
|
| |
|
|
|
|
| |
Accidentally broken in commit 95462747.
|
|
|
|
|
|
| |
XGetWindowProperty is a really bad API, almost as if the NSA designed
it. The wrapper takes care of verifying the return values and handle
corner cases.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The window "gravity" influences how placement interacts with WM added
borders (i.e. from decorations). This is probably what the code removed
in commit c14721c8 was about.
In theory, we'd probably want to set the gravity depending on the
relative placement requested by the user (so that it's possible to line
up the top/left video pixel with the monitor corner, as well as the
bottom/right pixel - but that would be too complicated, and who cares
after all?).
I'm also not sure whether CenterGravity really uses the top/left corner
as reference point (instead of making coordinates relative to the window
center), but empirically it's correct.
|
| |
|
|
|
|
| |
There's apparently no reason why we should set a bogus size.
|
|
|
|
|
| |
Now it's always recreated in vo_x11_sizehint(). Also, the Xlib manual
says you must use XAllocSizeHints() (for ABI reasons), so do that.
|
| |
|
|
|
|
|
|
|
| |
Try to get the "new" code path (using NetWM/EWMH) free of hacks done for
the sake of old WMs or the no-WM case.
Implement --fs-screen using _NET_WM_FULLSCREEN_MONITORS.
|
|
|
|
|
|
| |
Keeps the window centered on resize. Seems nicer. (Although it's worse
if 1. the default placement of the WM puts it into a monitor corner,
and 2. you switch to a larger video.)
|
|
|
|
|
|
|
|
|
|
| |
It was added with 3813c685 in 2004. I'm not really sure why this gravity
stuff would be needed; apparently it has to do with misplacements with
broken WMs and had to be changed on fullscreen. Just get rid of it; it
works perfectly fine without on modern WMs.
The thread discussing this is here:
http://mplayerhq.hu/pipermail/mplayer-dev-eng/2004-July/027674.html
|
|
|
|
|
| |
XInternAtom() already caches lookups. Even if calling XInternAtom would
be always inefficient, it wouldn't matter much during normal playback.
|
|
|
|
| |
Keeping it separate seems less readable.
|
|
|
|
|
| |
Simplifies the code a lot. You can still use --x11-netwm=no to disable
NetWM for whatever reasons.
|
|
|
|
| |
This was for Motif Window Manager. No, I don't care about Motif.
|
|
|
|
|
| |
Unfortunately, it looks like some Motif functionality is still needed
to allow for --no-border.
|
|
|
|
|
|
|
| |
This should get rid of some flickering. Since this actually skips all
the wacky fullscreening code on startup, this might lead to certain
wacky features to stop working. In this case, you'll have to use the
--x11-fstype option, and disable _NETWM_STATE_FULLSCREEN usage.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_x11_map_window() was attempting to clear the window on map. However,
it did so immediately after the map request. It probably assumed that
the drawing calls for clearing the window would be queued along with the
map request, and then executed in the right order. However, this
assumption was wrong - the map request first has to go to the window
manager (I guess?), so a lot of things happen before the window is even
mapped.
Fix this by moving the call to the MapNotify message handler, when the
window (apparently) becomes really visible.
I also tried to set CWBackPixel to black instead, but this seemed to
result in flickering on manual resizing.
|
|
|
|
|
|
|
|
|
|
|
| |
This blocks everything, until the window is actually reported as mapped.
This fixes the race condition between VO initialization and mapping the
window, which resulted in possibly different window sizes, leading to an
immediate redraw, visible as flashing.
Note that if the map event never comes for some reason, we're out of
luck and will block forever.
|
|
|
|
|
| |
Tried to load a 32 bit value by dereferencing a uint32_t pointer, but
the pointer is not guaranteed to be aligned, not even in practice.
|
|
|
|
| |
See previous commit.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Fix all include statements of the form:
#include "libav.../..."
These come from MPlayer times, when FFmpeg was somehow part of the
MPlayer build tree, and this form was needed to prefer the local files
over system FFmpeg.
In some cases, the include statement wasn't needed or could be replaced
with mpv defined symbols.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
There were some bad interactions with the OSC.
For one, dragging the OSC bar, and then moving the mouse outside of the
OSC (while mouse button still held) would suddenly initiate window
dragging. This was because win_drag_button1_down was not reset when
sending a normal mouse event, which means the window dragging code can
become active even after we've basically decided that the preceding
click didn't initiate window dragging.
Second, dragging the window and clicking on the OSC bar after that did
nothing. This was because no mouse button up event was sent to the core,
even though a mouse down event was sent. So make sure the key state is
erased with MP_INPUT_RELEASE_ALL.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
We don't check whether the WM supports _NET_WM_MOVERESIZE_MOVE, but
if it doesn't, nothing bad happens. There might be a race condition
when pressing a button, and then moving the mouse and releasing the
button at the same time; then the WM might get the message to initiate
moving the window after the mouse button has been released, in which
case the result will probably be annoying. This could possibly be fixed
by sending _NET_WM_MOVERESIZE_CANCEL on button release, but on the
other hand, we probably won't receive a button release event in this
situation, so ignore this problem.
The dragging is initiated only when moving the mouse pointer after a
click in order to reduce annoying behavior when the user is e.g.
doubleclicking.
Closes #608.
|
|
|
|
|
|
|
| |
This was done incorrectly in the previous commit: the fallback size used
the window size as requested with the first config call, which is the
size of the hidden window in the vo_opengl case. (That damn hidden
window again...)
|
|
|
|
|
|
|
|
|
| |
This code essentially does nothing. As far as I could find out, this
actually used to do something. Then it was removed with commit efe7c39f,
leaving some leftover code that didn't do anything useful. This happened
12 years ago!
Also remove a commented debug printf.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
vo_opengl creates a hidden X11 window to probe the OpenGL context. It
must do that before creating a visible window, because VO creation and
VO config are separate phases.
There's a race condition involving the hidden window: when starting with
--fs, and then leaving fullscreen, the unfullscreened window is
sometimes set to the aspect ratio of the hidden window. I'm not sure why
the window size itself uses the correct size (but corrupted by the wrong
aspect), but that's perhaps because the window manager is free to ignore
the size hint while honoring the aspect, or something equally messed up.
It turns out this happens because x11_common.c thinks the size of the
hidden window is the size of the unfullscreened window. This in turn
happens because vo_x11_update_geometry() reads the size of the hidden
window when called in vo_x11_fullscreen() (called from
vo_x11_config_vo_window()) when mapping the fullscreen window. At that
point, the window could be mapped, but not necessarily. If it's not
mapped, it will get the size of the unfullscreened window... I think.
One could fix this by actively waiting until the window is mapped. Try
to pick a less hacky approach instead, and never read the window size
until MapNotify is received.
vo_x11_create_window() needs a hack, because we'd possibly set the VO's
size to 0, resulting e.g. in vdpau to fail initialization. (It'll print
error messages until a proper resize is received.)
|
|
|
|
|
|
|
|
|
| |
Doesn't make any sense anymore. X11 (which was mentioned in the manpage)
autodetects it, and everything else ignored the option values.
Since for incomprehensible reasons the backends and vo.c still need to
exchange information about the screensize using the option fields,
they're not removed yet.
|
|
|
|
|
| |
This never made any real sense; the "backend" has to access vo->dx/dy
anyway.
|
|
|
|
|
|
|
|
| |
For some reason, this made all VO backends both set the screen
resolution in opts->screenwidth/height, and call
aspect_save_screenres(). Remove the latter. Move the code to calculate
the PAR-corrected window size from aspect.c to vo.c, and make it so that
the monitor PAR is recalculated when it makes sense.
|
|
|
|
|
|
| |
Both X11 and Wayland support the same format for drag & drop operations
(text/uri-list), and the code for that was copied from x11_common.c to
wayland_common.c. Factor it out.
|
|
|
|
|
| |
event.c will be used to feed the input queue with 'global' events that don't
mesh well with the usual check_events path in mpv.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Drag and drop is pretty complicated (just note how the number of Atoms
in use almost doubles), so I'm not sure whether this works everywhere.
This has been written by looking at the specification [1] or what looks
like the specification, and some external example code [2]. (The latter
one has no code license, but we didn't copy any code.)
We completely ignore the "requirement" of the spec. that the filename
"must" include username and hostname, e.g. "file://user@host/path/file".
In theory, this is required because X is network transparent, but at
this point the so called network transparency is a complete joke, and
Konqueror for one didn't include hostnames in "file://" URIs.
Tested with konqueror as drop source.
[1] http://www.newplanetsoftware.com/xdnd/
[2] http://www.edwardrosten.com/code/dist/x_clipboard-1.1/paste.cc
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This reverts commit 877303aaa9111fc56a8e5edbeb439699acfe44c0.
The OpenGL 2.1 fallback for vo_opengl didn't work. Two things come
together: 1. trying to create an OpenGL 3.0 context will fail with
a GLXBadFBConfig error, and 2. X errors are fatal by default. Since
the reverted commit removed the X error handler, the mpv process was
killed, instead of continuing for the fallback.
(Note that this commit is not an exact inverse commit, since mp_msg
changed, but it does about the same thing.)
|
| |
|
|
|
|
|
|
|
|
|
| |
This has similar problems as the ALSA message callback, though in theory
we could use the Display handle to find the right mpv instance from the
global callback. It still wouldn't work if another library happens to
set the error handler at the same time. There doesn't seem much of an
advantage overriding the error handler (though it used to be required),
so remove it.
|
| |
|
|
|
|
|
|
|
|
|
| |
Since m_option.h and options.h are extremely often included, a lot of
files have to be changed.
Moving path.c/h to options/ is a bit questionable, but since this is
mainly about access to config files (which are also handled in
options/), it's probably ok.
|
| |
|
|
|
|
|
|
|
|
|
| |
The tmsg stuff was for the internal gettext() based translation system,
which nobody ever attempted to use and thus was removed. mp_gtext() and
set_osd_tmsg() were also for this.
mp_dbg was once enabled in debug mode only, but since we have log level
for enabling debug messages, it seems utterly useless.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This commit adds a new build system based on waf. configure and Makefile
are deprecated effective immediately and someday in the future they will be
removed (they are still available by running ./old-configure).
You can find how the choice for waf came to be in `DOCS/waf-buildsystem.rst`.
TL;DR: we couldn't get the same level of abstraction and customization with
other build systems we tried (CMake and autotools).
For guidance on how to build the software now, take a look at README.md
and the cross compilation guide.
CREDITS:
This is a squash of ~250 commits. Some of them are not by me, so here is the
deserved attribution:
- @wm4 contributed some Windows fixes, renamed configure to old-configure
and contributed to the bootstrap script. Also, GNU/Linux testing.
- @lachs0r contributed some Windows fixes and the bootstrap script.
- @Nikoli contributed a lot of testing and discovered many bugs.
- @CrimsonVoid contributed changes to the bootstrap script.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The configure followed 5 different convetions of defines because the next guy
always wanted to introduce a new better way to uniform it[1]. For an
hypothetic feature 'hurr' you could have had:
* #define HAVE_HURR 1 / #undef HAVE_DURR
* #define HAVE_HURR / #undef HAVE_DURR
* #define CONFIG_HURR 1 / #undef CONFIG_DURR
* #define HAVE_HURR 1 / #define HAVE_DURR 0
* #define CONFIG_HURR 1 / #define CONFIG_DURR 0
All is now uniform and uses:
* #define HAVE_HURR 1
* #define HAVE_DURR 0
We like definining to 0 as opposed to `undef` bcause it can help spot typos
and is very helpful when doing big reorganizations in the code.
[1]: http://xkcd.com/927/ related
|
|
|
|
|
|
| |
This is a bit more intuitive, since before, the window size was just set
to something random when setting the window-scale property during
fullscreen.
|
| |
|
|
|
|
|
|
|
|
| |
As preparation for resizing the window with input commands in the
following commit.
Since there are already so many functions which somehow resize the
window, add the word "highlevel" to the name of this new function.
|
|
|
|
|
|
|
|
|
|
| |
This stopped working when the code was changed to create a window even
if --wid is used.
It appears we can't create our own window in this case, because in X11
there is no difference between a window with the root window as parent,
and a window that is managed by the WM. So make this (kind of worthless)
special case use the root window itself.
|
|
|
|
|
| |
Tested with recent metacity; this code is not triggered anymore. The
code was added in 2003 and probably has been unused for years.
|
| |
|
|
|
|
| |
This is completely pointless, but it still somehow bugged me.
|
|
|
|
|