| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is done in several steps:
1. refactor MPGLContext -> struct ra_ctx
2. move GL-specific stuff in vo_opengl into opengl/context.c
3. generalize context creation to support other APIs, and add --gpu-api
4. rename all of the --opengl- options that are no longer opengl-specific
5. move all of the stuff from opengl/* that isn't GL-specific into gpu/
(note: opengl/gl_utils.h became opengl/utils.h)
6. rename vo_opengl to vo_gpu
7. to handle window screenshots, the short-term approach was to just add
it to ra_swchain_fns. Long term (and for vulkan) this has to be moved to
ra itself (and vo_gpu altered to compensate), but this was a stop-gap
measure to prevent this commit from getting too big
8. move ra->fns->flush to ra_gl_ctx instead
9. some other minor changes that I've probably already forgotten
Note: This is one half of a major refactor, the other half of which is
provided by rossy's following commit. This commit enables support for
all linux platforms, while his version enables support for all non-linux
platforms.
Note 2: vo_opengl_cb.c also re-uses ra_gl_ctx so it benefits from the
--opengl- options like --opengl-early-flush, --opengl-finish etc. Should
be a strict superset of the old functionality.
Disclaimer: Since I have no way of compiling mpv on all platforms, some
of these ports were done blindly. Specifically, the blind ports included
context_mali_fbdev.c and context_rpi.c. Since they're both based on
egl_helpers, the port should have gone smoothly without any major
changes required. But if somebody complains about a compile error on
those platforms (assuming anybody actually uses them), you know where to
complain.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This does two separate rather intrusive things:
1. Make the hwdec context (which does initialization, provides the
device to the decoder, and other basic state) and frame mapping
(getting textures from a mp_image) separate. This is more
flexible, and you could map multiple images at once. It will
help removing some hwdec special-casing from video.c.
2. Switch all hwdec API use to ra. Of course all code is still
GL specific, but in theory it would be possible to support other
backends. The most important change is that the hwdec interop
returns ra objects, instead of anything GL specific. This removes
the last dependency on GL-specific header files from video.c.
I'm mixing these separate changes because both requires essentially
rewriting all the glue code, so better do them at once. For the same
reason, this change isn't done incrementally.
hwdec_ios.m is untested, since I can't test it. Apart from superficial
mistakes, this also requires dealing with Apple's texture format
fuckups: they force you to use GL_LUMINANCE[_ALPHA] instead of GL_RED
and GL_RG. We also need to report the correct format via ra_tex to
the renderer, which is done by find_la_variant(). It's unknown whether
this works correctly.
hwdec_rpi.c as well as vo_rpi.c are still broken. (I need to pull my
RPI out of a dusty pile of devices and cables, so, later.)
|
| |
|
|
|
| |
Just remove one callback, and fold the functionality into the other one.
RPI will still not compile, so the hwdec_rpi.c changes are untested.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Move multiple GL-specific things from the renderer to other places like
vo_opengl.c, vo_opengl_cb.c, and ra_gl.c.
The vp_w/vp_h parameters to gl_video_resize() make no sense anymore, and
are implicitly part of struct fbodst.
Checking the main framebuffer depth is moved to vo_opengl.c. For
vo_opengl_cb.c it always assumes 8. The API user now has to override
this manually. The previous heuristic didn't make much sense anyway.
The only remaining dependency on GL is the hwdec stuff, which is harder
to change.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This backend is selected if vaapi is available, but vaapi-over-EGL is
not. This causes various issues around the forced RGB conversion, which
is done with fixed, usually incorrect parameters.
It seems the existing auto probing check is too weak, and doesn't really
prevent it from getting loaded. Fix this by adding a flag to not ever
load this during auto probing.
I'm still not deleting it, because it's useful for testing on nvidia
machines.
See #4555.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
Instead of setting up a weird swizzle (which is linked to how the
internal renderer code works, rather than the generic format code), add
per-component mapping to gl_imgfmt_desc.
The renderer still computes the weird swizzle, but at least it's
confined to itself. Also, it appears the hwdec backends don't need this
anymore.
It's really nice that the messy init_format() goes away too.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
GL_LUMINANCE_ALPHA is the only reason why per-plane swizzles exist.
Remove per-plane swizzles (again), and regrettably handle them as
special cases (again). Carry along the logical texture format (called
gl_format in some parts of the code, including the new one).
We also don't need a use_integer flag, since the new gl_format member
implies whether it's an integer texture. (Yes, the there are separate
logical GL formats for integer textures. This aspect of the OpenGL API
is hysteric at best.)
This should change nothing about actual rendering logic and GL API
usage.
|
| |
|
|
|
|
|
|
|
|
|
| |
Introduce the --opengl-hwdec-interop option, which replaces
--hwdec-preload. The new option allows explicit selection of the interop
backend.
This is relatively complex, and I would have preferred not to add this,
but it's probably useful to debug certain problems. In exchange, the
"new" option documents that pretty much any but the simplest use of it
will not be forward compatible.
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
| |
This overlay support specifically skips the OpenGL rendering chain, and
uses GL rendering only for OSD/subtitles. This is for devices which
don't have performant GL support.
hwdec_rpi.c contains code ported from vo_rpi.c. vo_rpi.c is going to be
deprecated. I left in the code for uploading sw surfaces (as it might
be slightly more efficient for rendering sw decoded video), although
it's dead code for now.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Until now, we've always converted vdpau video surfaces to RGB, and then
mapped the resulting RGB texture. Change this so that the surface is
mapped as NV12 plane textures.
The reason this wasn't done until now is because vdpau surfaces are
mapped in an "interlaced" way as separate fields, even for progressive
video. This requires messy reinterleraving. It turns out that even
though it's an extra processing step, the result can be faster than
going through the video mixer for RGB conversion.
Other than some potential speed-gain, doing this has multiple other
advantages. We can apply our own color conversion, which is important in
more complex cases. We can correctly apply debanding and potentially
other processing that requires chroma-specific or in-YUV handling.
If deinterlacing is enabled, this switches back to the old RGB
conversion method. Until we have at least a primitive deinterlacer in
vo_opengl, this will stay this way. The d3d11 and vaapi code paths are
similar. (Of course these don't require any crazy field reinterleaving.)
|
| |
|
|
|
|
|
|
| |
ANGLE doesn't handle this very strictly. But if they change this in the
future, it shouldn't brick us.
Not quite happy with this glsl_extensions fields, but it is quite
unintrusive after all.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Rename gl_hwdec_driver.map_image to map_frame, and let it fill out a
struct gl_hwdec_frame describing the exact texture layout. This gives
more flexibility to what the hwdec interop can export. In particular, it
can export strange component orders/permutations and textures with
padded size. (The latter originating from cropped video.)
The way gl_hwdec_frame works is in the spirit of the rest of the
vo_opengl video processing code, which tends to put as much information
in immediate state (as part of the dataflow), instead of declaring it
globally. To some degree this duplicates the texplane and img_tex
structs, but until we somehow unify those, it's better to give the hwdec
state its own struct. The fact that changing the hwdec struct would
require changes and testing on at least 4 platform/GPU combinations
makes duplicating it almost a requirement to avoid pain later.
Make gl_hwdec_driver.reinit set the new image format and remove the
gl_hwdec.converted_imgfmt field.
Likewise, gl_hwdec.gl_texture_target is replaced with
gl_hwdec_plane.gl_target.
Split out a init_image_desc function from init_format. The latter is not
called in the hwdec case at all anymore. Setting up most of struct
texplane is also completely separate in the hwdec and normal cases.
video.c does not check whether the hwdec "mapped" image format is
supported. This should not really happen anyway, and if it does, the
hwdec interop backend must fail at creation time, so this is not an
issue.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The main change is with video/hwdec.h. mp_hwdec_info is made opaque (and
renamed to mp_hwdec_devices). Its accessors are mainly thread-safe (or
documented where not), which makes the whole thing saner and cleaner. In
particular, thread-safety rules become less subtle and more obvious.
The new internal API makes it easier to support multiple OpenGL interop
backends. (Although this is not done yet, and it's not clear whether it
ever will.)
This also removes all the API-specific fields from mp_hwdec_ctx and
replaces them with a "ctx" field. For d3d in particular, we drop the
mp_d3d_ctx struct completely, and pass the interfaces directly.
Remove the emulation checks from vaapi.c and vdpau.c; they are
pointless, and the checks that matter are done on the VO layer.
The d3d hardware decoders might slightly change behavior: dxva2-copy
will not use the VO device anymore if the VO supports proper interop.
This pretty much assumes that any in such cases the VO will not use any
form of exclusive mode, which makes using the VO device in copy mode
unnecessary.
This is a big refactor. Some things may be untested and could be broken.
|
| |
|
|
|
|
|
|
| |
Introduce hwdec-current and hwdec-interop properties.
Deprecate hwdec-detected, which never made a lot of sense, and which is
replaced by the new properties. hwdec-active also becomes useless, as
hwdec-current is a superset, so it's deprecated too (for now).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The underlying intention of this code is to make changing
--videotoolbox-format at runtime work. For this reason, the format can't
just be statically setup, but must be read from the option at runtime.
This means the format is not fixed anymore, and we have to make sure the
renderer is property reinitialized if the format changes. There is
currently no way to trigger reinit on this level, which is why the
mp_image_params.hw_subfmt field was introduced.
One sketchy thing remains: normally, the renderer is supposed to be
involved with VO format negotiation, which would ensure that the VO
can take the format at all. Since the hw_subfmt is not part of this
format negotiation, it's implied the get_vt_fmt() callback only
returns formats supported by the renderer. This is not necessarily
clear because vo_opengl checks this with converted_imgfmt separately.
None of this matters in practice though, because we know all formats
are always supported.
(This still requires somehow triggering decoder reinit to make the
change effective.)
|
| |
|
|
|
|
|
| |
Since there can be multiple backends for a single API (vaapi can use GLX
or EGL), not logging the exact backend name is annoying. So add it. At
the same time, there is no need to duplicate the name as used by the
--hwdec options, so replace it with using the numeric hwdec API ID.
|
| |
|
|
|
|
|
|
|
|
| |
Because apparently there's no ideal universally working format.
The weird OpenGL texture format for kCVPixelFormatType_32BGRA is from:
http://stackoverflow.com/questions/22077544/draw-an-iosurface-to-an-opengl-context
(Which apparently got it from the linked Apple example code.)
|
| |
|
|
|
|
|
| |
Causes more harm than it helps. Will eventually be removed.
Also rename the "reject_emulated" field to "probing" - this is more
appropriate now.
|
| |
|
|
|
|
|
|
|
| |
VideoToolbox is preferred. Now that FFmpeg released 2.8, there's no
reason to support VDA anymore. In fact, we had a bug that made VDA not
useable with older FFmpeg versions in some newer mpv releases.
VideoToolbox is supported even on slightly older OSX versions, and if
not, you still can run mpv without hw decoding.
|
|
|
This is a bit redundant with the name of the directory itself, and not
in line with existing naming conventions.
|
