| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
| |
This was supposed to have changed back when oversample was reintroduced
in 3007250. Fixes #2155.
|
|
|
|
|
|
|
|
|
|
|
|
| |
I still have no idea why this is needed, maybe some weird off-by-one
in some shitty driver? Either way, the difference for a working setup
shouldn't be too major, the most noticeable effect would be somewhat worse
performance when resizing the video during playback with interpolation
enabled using the mouse.
That's a specific enough side effect for me to not care as much about it.
Fixes #1814.
|
|
|
|
|
|
|
|
| |
There are some situations when redrawing is requested, but the current
frame was deleted. This could happen when switching e.g. hw decoding
mid-stream.
Separate uploading/drawing and fix the condition.
|
|
|
|
|
|
|
| |
Just avoid some code duplication. Also, gl_video_set_options() having a
queue size output parameter is weird at best. While I don't appreciate
that this commit suddenly requires gl_video.c to deal with vo.c directly
in a special case, it's simply the best place to put this function.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The VO will be provided with future frames even if the format changes
mid-stream. This caused a crash if these frames were actually used (i.e.
interpolation mode was enabled).
Fixes a crash when deinterlacing is toggled during playback, and the
deinterlacer changes the stream format (as it can happen e.g. if the
decoder outputs nv12, which in turn happens with hw decoding).
(On a side note, future frames are always non-NULL. Also, the current
frame is of course always in the correct format.)
|
|
|
|
|
| |
After recent changes, there is no reason why gl_video_set_image() should
exist anymore. So merge it back into gl_video_upload_image().
|
|
|
|
| |
Closes #2102.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When seeking to a different position, and seeking takes long, the OSD
might get redrawn. This means that the VO will receive a request to
redraw an old frame using whatever the previous PTS was. This breaks the
interpolation logic: the old frame will be added to the queue, and then
the next frames (with lower PTS if you seeked backwards) are not drawn
as the logic assumes they're past frames.
Fix this by using the non-interpolation code path when redrawing after a
seek reset, and no "real" frame has been drawn yet.
It's a recent regression caused by the redrawing code simplification.
The old code simply sent a VOCTRL for redrawing the frame, and the VO
had to deal with retaining the old frame on its own.
This is a hack as in there's probably a better solution.
Fixes #2097.
|
|
|
|
|
|
|
|
| |
This is not the most theoretically perfect solution, ideally we could
check to see if the frame in question has already been rendered
somewhere in the queue and then avoid re-rendering it, at the cost of a
few extra lines of code. But I don't think the performance trade-off is
dramatic enough here.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
draw_image_timed is renamed to draw_frame. struct frame_timing is
renamed to vo_frame. flip_page_timed is merged into draw_frame (the
additional parameters are part of struct vo_frame). draw_frame also
deprecates VOCTRL_REDRAW_FRAME, and replaces it with a method that
works for both VOs which can cache the current frame, and VOs which
need to redraw it anyway.
This is preparation to making the interpolation and (work in progress)
display sync code saner.
Lots of other refactoring, and also some simplifications.
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This should make interpolation work much better in general, although
there still might be some side effects for unusual framerates (eg. 35 Hz
or 48 Hz). Most of the common framerates are tested and working fine.
(24 Hz, 30 Hz, 60 Hz)
The new code doesn't have support for oversample yet, so it's been
removed (and will most likely be reimplemented in a cleaner way if
there's enough demand). I would recommend using something like robidoux
or mitchell instead of oversample, though - they're much
smoother for the common cases.
|
|
|
|
|
|
|
|
|
|
|
|
| |
gl_video_set_options() does not acquire ownership of the opts parameter
or its contents. In case of vo_cmdline, opts will point to temporary
memory. This memory will be free'd at a later point, and p->opts will
point to free'd memory on the next reinitialization.
The fix is pretty ugly, but it's a quick bug fix. This can probably be
removed once VO sub-options are exposed as properties.
Fixes #2035.
|
|
|
|
|
|
|
|
|
|
| |
If gl_hwdec_driver.map_image fails, all textures will be set to 0. This
in turn makes pass_prepare_src_tex() skip generation of the texture
uniforms, which leads to a shader compilation error, as e.g. texture0 is
not defined but expected to exist and accessed.
Set the textures to an invalid non-0 ID instead. OpenGL can deal with
it.
|
|
|
|
|
| |
As suggested by haasn. The term "full range" makes it sound like it has
to do with TV vs. PC range, which is not the case at all.
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
They're completely orthogonal concepts, merged in the past due to
convenience and ease of implementing it in the old #ifdef hell renderer.
Especially after the CMS stuff was generalized by 634b4a, this was a
trivial change to implement and also means color management will be much
higher quality when enabled with vo=opengl (which had quantization
issues in the past due to the 8 bit FBO format and upscaling), since it
can be done in a single pass now.
|
| |
|
|
|
|
|
|
|
|
| |
A rather dumb hack to copy the problematic rectangle textures (mandated
by VDA) into 2D ones.
(This isn't done yet for OpenGL 3.0+. We need to make sure the
performance isn't reduced too much by it.)
|
|
|
|
| |
Completely useless.
|
| |
|
|
|
|
|
|
|
|
| |
Reduces (but likely does not remove) the danger of rounding intermediate
values down to 8 bit. This is important for cscale, or any other
processing that might store raw YUV values in framebuffers.
Fixes #1918.
|
|
|
|
|
|
|
|
|
|
|
| |
Currently, the wayland backend needs extra work to avoid drawing more
often than the wayland frame callback allows. (This is not ideal, but
will be fixed at a later time.)
Unify this with the start_frame callback added for cocoa. Some details
change for the better. For example, if a frame is dropped, and a redraw
is done afterwards, the actually correct frame is redrawn, instead
whatever was in the textures from before the dropped frame.
|
|
|
|
|
|
|
|
|
|
| |
Not sure why this was so roundabout; probably to keep spam down if the
user's OpenGL drivers are crap (but then just don't enable extended
features), or because the "Disabling..." text was so repetitious.
But there doesn't seem to be a good reason after all. Also, this could
already overflow the fixed size disabled[] array. Just print the
messages directly.
|
| |
|
|
|
|
|
| |
Since scaling the video changes the aspect ratio, we have to compensate
for this when rendering subtitles.
|
|
|
|
|
| |
This can be used to draw the subtitles at the video's native res, which
can make them look more natural and increases performance.
|
|
|
|
| |
Seems relatively painful in this case, but they are morally wrong.
|
| |
|
| |
|
| |
|
|
|
|
|
| |
With target-prim and target-trc it makes sense to include some common
colorspaces that aren't strictly speaking used for video.
|
| |
|
| |
|
|
|
|
| |
This lets us tune the window parameter
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This merges all of the scaler-related options into a single
configuration struct, and also cleans up the way they're passed through
the code. (For example, the scaler index is no longer threaded through
pass_sample, just the scaler configuration itself, and there's no longer
duplication of the params etc.)
In addition, this commit makes scale-down more principled, and turns it
into a scaler in its own right - so there's no longer an ugly separation
between scale and scale-down in the code.
Finally, the radius stuff has been made more proper - filters always
have a radius now (there's no more radius -1), and get a new .resizable
attribute instead for when it's tunable.
User-visible changes:
1. scale-down has been renamed dscale and now has its own set of config
options (dscale-param1, dscale-radius) etc., instead of reusing
scale-param1 (which was arguably a bug).
2. The default radius is no longer fixed at 3, but instead uses that
filter's preferred radius by default. (Scalers with a default radius
other than 3 include sinc, gaussian, box and triangle)
3. scale-radius etc. now goes down to 0.5, rather than 1.0. 0.5 is the
smallest radius that theoretically makes sense, and indeed it's used
by at least one filter (nearest).
Apart from that, it should just be internal changes only.
Note that this sets up for the refactor discussed in #1720, which would
be to merge scaler and window configurations (include parameters etc.)
into a single, simplified string. In the code, this would now basically
just mean getting rid of all the OPT_FLOATRANGE etc. lines related to
scalers and replacing them by a single function that parses a string and
updates the struct scaler_config as appropriate.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This makes the core much more elegant, reusable, reconfigurable and also
allows us to more easily add aliases for specific configurations.
Furthermore, this lets us apply a generic blur factor / window function
to arbitrary filters, so we can finally "mix and match" in order to
fine-tune windowing functions.
A few notes are in order:
1. The current system for configuring scalers is ugly and rapidly
getting unwieldy. I modified the man page to make it a bit more
bearable, but long-term we have to do something about it; especially
since..
2. There's currently no way to affect the blur factor or parameters of
the window functions themselves. For example, I can't actually
fine-tune the kaiser window's param1, since there's simply no way to
do so in the current API - even though filter_kernels.c supports it
just fine!
3. This removes some lesser used filters (especially those which are
purely window functions to begin with). If anybody asks, you can get
eg. the old behavior of scale=hanning by using
scale=box:scale-window=hanning:scale-radius=1 (and yes, the result is
just as terrible as that sounds - which is why nobody should have
been using them in the first place).
4. This changes the semantics of the "triangle" scaler slightly - it now
has an arbitrary radius. This can possibly produce weird results for
people who were previously using scale-down=triangle, especially if
in combination with scale-radius (for the usual upscaling). The
correct fix for this is to use scale-down=bilinear_slow instead,
which is an alias for triangle at radius 1.
In regards to the last point, in future I want to make it so that
filters have a filter-specific "preferred radius" (for the ones that
are arbitrarily tunable), once the configuration system for filters has
been redesigned (in particular in a way that will let us separate scale
and scale-down cleanly). That way, "triangle" can simply have the
preferred radius of 1 by default, while still being tunable. (Rather
than the default radius being hard-coded to 3 always)
|
|
|
|
| |
Terribly obscure, and vf_format can do this for all VOs.
|
|
|
|
|
|
|
|
| |
Currently, the code just skipped CMS completely. This commit treats them
as sRGB by default, instead.
This also refactors much of the color management code to make it more
generalized and re-usable.
|
|
|
|
| |
Minor reusability factor
|
|
|
|
|
| |
This moves common re-definitions to a custom function and also shortens the
names to make stuff less verbose in general.
|
|
|
|
|
| |
This makes the VO more responsive to equalizer changes (eg. brightness)
when interpolation is used.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This has a number of user-visible changes:
1. A new flag blend-subtitles (default on for opengl-hq) to control this
behavior.
2. The OSD itself will not be color managed or affected by
gamma controls. To get subtitle CMS/gamma, blend-subtitles must be
used.
3. When enabled, this will make subtitles be cleanly interpolated by
:interpolation, and also dithered etc. (just like the normal output).
Signed-off-by: wm4 <wm4@nowhere>
|
|
|
|
|
|
|
| |
Bilinear scaling is not a suitable default for something named "hq"; the
whole reason this was done in the past was because cscale used to be
obscenely slow. This is no longer the case, with cscale being nearly
free.
|
| |
|
|
|
|
|
|
|
|
|
| |
When not receiving frame callbacks, we should not draw anything to avoid
blocking the OpenGL renderer. We do this by extending gl context api, by
introducing new optional function 'is_active', that indicates whether
OpenGL renderers should draw or not.
This fixes issue #249.
|
|
|
|
|
| |
This seems to have been a mistranslation from the original code, which
multiplied the gamma by 2.6 (*not* the color itself).
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |
Unlike other VOs, this rendered OSD even while no VO was created
(because the renderer lives as long as the API user wants). Change this,
and refactor the code so that the OSD object is accessible only while
the VO is created.
(There is a short time where the OSD can still be accessed even after VO
destruction - this is not a race condition, though it's inelegant and
unfortunately unavoidable.)
|
|
|
|
|
| |
Also reindent the few lines that call into the actual renderer to remove
the "draw_osd" goto.
|
|
|
|
| |
It was ignored.
|
|
|
|
|
|
| |
gl_video_set_options() didn't update it, so the default value set on
initialization was used. Fix by always setting the clear color before
the clear command; it's slightly easier to follow too.
|
| |
|
|
|
|
|
|
|
|
|
| |
There's literally no reason why these functions have to be inline (they
might be performance critical, but then the function call overhead isn't
going to matter at all).
Uninline them and move them to mp_image.c. Drop the header file and fix
all uses of it.
|
|
|
|
|
|
|
| |
We now update uniforms every time, so we should try to reduce the number
of uniforms to avoid performance penalties. (Originally, some caching
was planned, but it looks like it would be too complicated to implement
compared to the expected gains.)
|
| |
|
|
|
|
|
|
| |
OPT_REPLACED can't specify option values or multiple options. Change to
OPT_REMOVED. Also, target-prim doesn't have an srgb option. BT.709 uses
sRGB primaries, so use it instead.
|
|
|
|
|
|
| |
Trade one bug for another, I don't even care anymore.
Fixes #1691.
|
| |
|
|
|
|
|
|
|
|
| |
The default scaling was a slight bit too low, which could cause buffer
underruns in some cases.
This should improve the result when using tscale filters other than
oversample. The oversample case should be unaffected.
|
|
|
|
|
|
| |
This adds extra debugging output for buffer underruns, to help track
down possible queueing issues. It also inverts the numberic output for
tscale=oversample to make more sense, without changing the logic.
|
|
|
|
|
|
|
|
|
|
|
|
| |
This moves the color management code out of pass_render_main (which is
now dedicated solely to up/downscaling and hence renamed pass_scale_main)
and into a new function, which gets called from pass_draw_to_screen
instead.
This makes more sense from a logical standpoint, and also means that we
interpolate in linear RGB, before color management - rather than after
it, which is significantly better for color accuracy and probably also
interpolation quality.
|
|
|
|
|
| |
This is interesting mainly because it's essentially equivalent to the
old smoothmotion algorithm. As such, it is now the default for tscale.
|