| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |
|
|
|
|
|
|
|
|
|
| |
Hr-seek was often off by one frame due to rounding issues, which have
been traditionally taken care off by adding a "tolerance". Essentially,
frames very close to the seek target PTS are not dropped, even if they
may strictly are before the seek target.
Commit 0af53353 accidentally removed this by always removing frames even
if they're within the "tolerance". Fix this by "unsharing" the logic and
making sure the segment code is inactive for normal seeks.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This is in preparation for a hypothetical API change in libavcodec,
which would allow the decoder to return multiple video frames before
accepting a new input packet.
In theory, the body of the if() added to vd_lavc.c could be replaced
with this code:
packet->buffer += ret;
packet->len -= ret;
but currently this is not needed, as libavformat already outputs one
frame per packet. Also, using libavcodec this way could lead to a
"deadlock" if the decoder refuses to consume e.g. garbage padding, so
enabling this now would introduce bugs.
(Adding this now for easier testing, and for symmetry with the audio
code.)
|
| |
|
|
|
|
|
|
|
|
| |
There is some strange code which sets the DTS of the packet to PTS (but
only if it's not AVI), which apparently helps with timestamp
determination with some broken files. This code is annoying because it
tries to avoid mutating the packet (which it logically doesn't own).
Move it to where it does and get rid of the packet_copy mess.
Needed for the following commit.
|
| |
|
|
|
|
|
| |
This tries to determine whether packet PTS values are accurate and can
be used for frame dropping during seeking. Move both checks (PTS is
missing; PTs is non-monotonic) to the earliest place where they can be
done.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This uses a different method to piece segments together. The old
approach basically changes to a new file (with a new start offset) any
time a segment ends. This meant waiting for audio/video end on segment
end, and then changing to the new segment all at once. It had a very
weird impact on the playback core, and some things (like truly gapless
segment transitions, or frame backstepping) just didn't work.
The new approach adds the demux_timeline pseudo-demuxer, which presents
an uniform packet stream from the many segments. This is pretty similar
to how ordered chapters are implemented everywhere else. It also reminds
of the FFmpeg concat pseudo-demuxer.
The "pure" version of this approach doesn't work though. Segments can
actually have different codec configurations (different extradata), and
subtitles are most likely broken too. (Subtitles have multiple corner
cases which break the pure stream-concatenation approach completely.)
To counter this, we do two things:
- Reinit the decoder with each segment. We go as far as allowing
concatenating files with completely different codecs for the sake
of EDL (which also uses the timeline infrastructure). A "lighter"
approach would try to make use of decoder mechanism to update e.g.
the extradata, but that seems fragile.
- Clip decoded data to segment boundaries. This is equivalent to
normal playback core mechanisms like hr-seek, but now the playback
core doesn't need to care about these things.
These two mechanisms are equivalent to what happened in the old
implementation, except they don't happen in the playback core anymore.
In other words, the playback core is completely relieved from timeline
implementation details. (Which honestly is exactly what I'm trying to
do here. I don't think ordered chapter behavior deserves improvement,
even if it's bad - but I want to get it out from the playback core.)
There is code duplication between audio and video decoder common code.
This is awful and could be shareable - but this will happen later.
Note that the audio path has some code to clip audio frames for the
purpose of codec preroll/gapless handling, but it's not shared as
sharing it would cause more pain than it would help.
|
| |
|
|
|
| |
Preparation for the timeline rewrite. The codec will be able to change,
the stream header not.
|
| |
|
|
| |
This is always the same value.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Until now (and in mplayer traditionally), avi timestamps were handled
with a timestamp FIFO. AVI timestamps are essentially just strictly
increasing frame numbers and are not reordered like normal timestamps.
Limiting the FIFO is required because frames can be dropped. To make
it worse, frame dropping can't be distinguished from the decoder not
returning output due to increasing the buffering required for B-frames.
("Measuring" the buffering at playback start seems like an interesting
idea, but won't work as the buffering could be increased mid-playback.)
Another problem are skipped frames (packets with data, but which do
not contain a video frame).
Besides dropped and skipped frames, there is the problem that we can't
always know the delay. External decoders like MMAL are not going to
tell us. (And later perhaps others, like direct VideoToolbox usage.)
In general, this works not-well enough that I prefer the solution of
passing through AVI timestamps as DTS. This is slightly incorrect,
because most decoders treat DTS as mpeg-style timestamps, which
already include a b-frame delay, and thus will be shifted by a few
frames. This means there will be a problem with A/V sync in some
situations.
Note that the FFmpeg AVI demuxer shifts timestamps by an additional
amount (which increases after the first seek!?!?), which makes the
situation worse. It works well with VfW-muxed Matroska files, though.
On RPI, the first X timestamps are broken until the MMAL decoder "locks
on".
|
| |
|
|
| |
Caused by the recent refactoring for complex filters.
|
| |
|
|
|
| |
Might possible improve A/V sync, although this is at best approximate.
(AVI is just fucked.)
|
| |
|
|
|
|
| |
Will be helpful for the coming filter support. I planned on merging
audio/video decoding, but this will have to wait a bit longer, so only
remove the duplicate status codes.
|
| |
|
|
|
|
|
|
|
|
| |
This codes tries to deal with broken PTS timestamps, but since commit
271cabe6 it didn't always overwrite the previous timestamp as it should
have. This mattered only if there were broken timestamps in the video
stream.
Also remove the pointless prev_codec_pts variables, since the decoder
doesn't overwrite these fields anymore.
|
| |
|
|
|
| |
Instead of using semi-public codec_pts/codec_dts fields in
struct dec_video, pass them via mp_image fields.
|
| |
|
|
|
|
|
|
|
|
|
| |
This moves some code related to decoding from video.c to dec_video.c,
and also removes some accesses to dec_video.c from the filtering code.
dec_video.ch is starting to make sense, and simply returns video frames
from a demuxer stream. The API exposed is also somewhat intended to be
easily changeable to move decoding to a separate thread, if we ever want
this (due to libavcodec already being threaded, I don't see much of a
reason, but it might still be helpful).
|
| |
|
|
|
|
|
|
|
| |
The aspect ratio calculations are cached (mainly so that aspect ratio
related messages are not logged on every frame). The cache is not clared
anymore when video filters are reconfigured, but changing the
video-aspect-ratio property relied on it. Make it explicit.
Fixes #2714.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Lots of noise to remove the vfilter/vo fields from dec_video.
From now on, video filtering and output will still be done together,
summarized under struct vo_chain.
There is the question where exactly the vf_chain should go in such a
decoupled architecture. The end goal is being able to place a "complex"
filter between video decoders and output (which will culminate in
natural integration of A->V filters for natural integration of
libavfilter audio visualizations). The vf_chain is still useful for
"final" processing, such as format conversions and deinterlacing. Also,
there's only 1 VO and 1 --vf option. So having 1 vf_chain for a VO seems
ideal, since otherwise there would be no natural way to handle all these
existing options and mechanisms.
There is still some work required to truly decouple decoding.
|
| |
|
|
|
|
| |
struct dec_video should have nothing to do with video filters or
outputs, and this huge chunk of code was somehow stuck directly in
dec_video.c.
|
| |
|
|
|
|
|
|
|
|
| |
Instead of handling this on filter chain reinit, do it directly after
the decoder. This makes the code less entangled. In particular, this
gets rid of the really weird "override params" concept in the video
filter code.
The last_format/fixed_formats have some redundance with decoder_output,
but unfortunately the latter has a slightly different use.
|
| |
|
|
|
|
|
|
|
|
| |
This is mainly a refactor. I'm hoping it will make some things easier
in the future due to cleanly separating codec metadata and stream
metadata.
Also, declare that the "codec" field can not be NULL anymore. demux.c
will set it to "" if it's NULL when added. This gets rid of a corner
case everything had to handle, but which rarely happened.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
MPlayer traditionally always used the display aspect ratio, e.g. 16:9,
while FFmpeg uses the sample (aka pixel) aspect ratio.
Both have a bunch of advantages and disadvantages. Actually, it seems
using sample aspect ratio is generally nicer. The main reason for the
change is making mpv closer to how FFmpeg works in order to make life
easier. It's also nice that everything uses integer fractions instead
of floats now (except --video-aspect option/property).
Note that there is at least 1 user-visible change: vf_dsize now does
not set the display size, only the display aspect ratio. This is
because the image_params d_w/d_h fields did not just set the display
aspect, but also the size (except in encoding mode).
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Approximately reverts commit 3ccac74d. This failed with some avi files,
which do pseudo-VFR by sending packets with empty frames (or repeat
frames, depending on point of view). Specifically, these packets are not
0 bytes, so they don't get skipped by libavformat, as with the usual VFR
avi hack. Instead, the packet contains a VOP with vop_coded=0, so
libavcodec will just return no frame. We could probably distinguish such
skipped frames and delayed frames by explicitly measuring the codec
delay by counting how long it takes to get the very first frame (and
then treat skips as explicit drops), but we may as well simply reinstate
the old code.
To appease to at least one semi-broken case, do not enable this logic on
the RPI, as the FFmpeg MMAL wrapper has arbitrary buffering (and MMAL
itself is asynchronous).
|
| |
|
|
|
|
|
|
|
|
| |
Use the first encountered packet PTS/DTS as base, instead of the last
one. This does not add the amount of frames buffered in the codec to the
PTS offset, and thus is better.
Also, don't add the frame time if there was no decoded frame yet. The
first frame should obviously have the timestamp of the first packet
(going by this heuristic).
|
| |
|
|
|
| |
It's obviously not needed, and only an artifact of the old PTS
determination code.
|
| |
|
|
|
|
|
|
|
| |
Useless. Sometimes it might be useful to make some extremely broken
files work, but on the other hand --no-correct-pts is sufficient for
these cases.
While we still need some of the code for AVI, the "auto" mode in
particular inflated the size of the code.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
This can't be handled correctly at all. Other cases when the decoder
might drop a frame (such as completely failing to decode a frame) will
shift timestamps by a frame, and it can't be avoided.
While we could maybe find a better way to handle this with libavcodec's
main decoders, this seems to be much harder if it should work with
certain HW decoders, which don't passthrough the DTS field (such as
MMAL). Another problem are .avi files with b-frames. So just leave it
as it is.
|
| |
|
|
|
|
|
|
|
|
| |
This was used only by the timestamp sorting code, which is a fallback
for avi files (as well as avi-muxed mkv files). This was supposed to
prevent accumulating timestamps in case the decoder consumes more
packets than it outputs frames (i.e. frames are dropped). This didn't
work very well (timestamps could be off by a large amount), the
estimation of the delay was fragile, and the interdependencies with the
decoder were annoying, so kill it.
|
| | |
|
| |
|
|
| |
fixes #2289
|
| |
|
|
|
|
| |
Utterly idiotic bullshit.
Fixes #2259.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
When showing cover art, the decoding logic pretends that the source has
an infinite number of frames. This slightly simplifies dealing with
filter data flow. It was done by feeding the same packet repeatedly to
the decoder (each decode run produces new output).
Change this by decoding once at the video initialization. This is easier
to follow, and increases robustness in case of broken images. Usually,
we try to tolerate decoding errors, so decoding normally continues, but
in this case it would just burn the CPU for no reason.
Fixes #2056.
|
| |
|
|
|
| |
These are basically MPlayer leftovers, and barely useful due to being
redundant with other messages. The FPS message is used somewhere else.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the old implementation for these properties. It was never very
good, often returned very innaccurate values or just 0, and was static
even if the source was variable bitrate. Replace it with the
implementation of "packet-video-bitrate". Mark the "packet-..."
properties as deprecated. (The effective difference is different
formatting, and returning the raw value in bits instead of kilobits.)
Also extend the documentation a little.
It appears at least some decoders (sipr?) need the
AVCodecContext.bit_rate field set, so this one is still passed through.
|
| |
|
|
| |
Signed-off-by: wm4 <wm4@nowhere>
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Remove the colorspace-related top-level options, add them to vf_format.
They are rather obscure and not needed often, so it's better to get them
out of the way. In particular, this gets rid of the semi-complicated
logic in command.c (most of which was needed for OSD display and the
direct feedback from the VO). It removes the duplicated color-related
name mappings.
This removes the ability to write the colormatrix and related
properties. Since filters can be changed at runtime, there's no loss of
functionality, except that you can't cycle automatically through the
color constants anymore (but who needs to do this).
This also changes the type of the mp_csp_names and related variables, so
they can directly be used with OPT_CHOICE. This probably ended up a bit
awkward, for the sake of not adding a new option type which would have
used the previous format.
|
| |
|
|
|
|
|
|
|
|
|
| |
Trying to handle such video is almost worthless, but it was requested by
at least 2 users.
If there are no timestamps, enable byte seeking by setting
ts_resets_possible. Use the video FPS (wherever it comes from) and the
audio samplerate for timing. The latter was already done by making the
first packet emit DTS=0; remove this again and do it "properly" in a
higher level.
|
| |
|
|
|
|
|
|
| |
For some reason there were two points in the code where it warned
against non-monotonic video PTS. The one in video.c triggered on PTS
going backwards or making large jumps forwards, while dec_video.c
triggered on PTS going backwards or PTS not changing. Merge them into a
single check, which warns against all cases.
|
| |
|
|
|
|
|
|
|
| |
This played e.g. a 1264x722 file as 1264x720. There was some code which
dropped the aspect ratio if the video (in original resolution) wasn't
scaled by more than 4 pixels. Commit 5f3c3f8c introduced this (although
I'm not really sure what the code replaced by it did).
Just remove this "feature".
|
| |
|
|
|
| |
The private context wasn't free'd when codec init failed. Restructure
the code so that it can't happen.
|
| |
|
|
|
|
|
|
|
|
|
|
| |
DVD and Bluray (and to some extent cdda) require awful hacks all over
the codebase to make them work. The main reason is that they act like
container, but are entirely implemented on the stream layer. The raw
mpeg data resulting from these streams must be "extended" with the
container-like metadata transported via STREAM_CTRLs. The result were
hacks all over demux.c and some higher-level parts.
Add a "disc" pseudo-demuxer, and move all these hacks and special-cases
to it.
|
| |
|
|
| |
Signed-off-by: wm4 <wm4@nowhere>
|
| |
|
|
|
| |
None of these are very important usually. For error analysis, the plain
log is useless anyway, and this information is still printed with "-v".
|
| |
|
|
| |
Since i_bps now contains bits/sec, rename it to reflect this change.
|
| |
|
|
|
|
|
| |
The i_bps members of the sh_audio and dev_video structs are mostly used
for displaying the average audio and video bitrates. Keeping them in
bits-per-second avoids truncating them to bytes-per-second and changing
them back lateron.
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Sometimes, Matroska files store monotonic PTS for h264 tracks with
b-frames, which means the decoder actually returns non-monotonic PTS.
Handle this with an evil trick: if DTS is missing, set it to the PTS.
Then the existing logic, which deals with falling back to DTS if PTS is
broken. Actually, this trick is not so evil at all, because usually, PTS
has no errors, and DTS is either always set, or always unset. So this
_should_ provoke no regressions (famous last words).
libavformat actually does something similar: it derives DTS from PTS in
ways unknown to me. The result is very broken, but it causes the DTS
fallback to become active, and thus happens to work.
Also, prevent the heuristic from being active if PTS is merely monotonic
instead of strictly-monotonic. Non-unique PTS is broken, but we can't
fallback to DTS anyway in these cases.
The specific mkv file that is fixed with this commit had the following
fields set:
Muxing application: libebml v1.3.0 + libmatroska v1.4.1
Writing application: mkvmerge v6.7.0 ('Back to the Ground') [...]
But I know that this should also fix playback of mencoder produced mkv
files.
|
| |
|
|
|
|
|
| |
Also remove MSGL_SMODE and friends.
Note: The indent in options.rst was added to work around a bug in
ReportLab that causes the PDF manual build to fail.
|
| |
|
|
|
|
|
| |
Change how the video decoding loop works. The structure should now be a
bit easier to follow. The interactions on format changes are (probably)
simpler. This also aligns the decoding loop with future planned changes,
such as moving various things to separate threads.
|
| |
|
|
|
| |
Now the video filter code handles these explicitly, which should
increase robustness (or at least find bugs earlier).
|
| | |
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This collects statistics and other things. The option dumps raw data
into a file. A script to visualize this data is included too.
Litter some of the player code with calls that generate these
statistics.
In general, this will be helpful to debug timing dependent issues, such
as A/V sync problems. Normally, one could argue that this is the task of
a real profiler, but then we'd have a hard time to include extra
information like audio/video PTS differences. We could also just
hardcode all statistics collection and processing in the player code,
but then we'd end up with something like mplayer's status line, which
was cluttered and required a centralized approach (i.e. getting the data
to the status line; so it was all in mplayer.c). Some players can
visualize such statistics on OSD, but that sounds even more complicated.
So the approach added with this commit sounds sensible.
The stats-conv.py script is rather primitive at the moment and its
output is semi-ugly. It uses matplotlib, so it could probably be
extended to do a lot, so it's not a dead-end.
|
| |
|
|
| |
