| Commit message (Collapse) | Author | Age | Files | Lines |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
AOs can report audio underruns, but only ao_alsa and ao_sdl (???)
currently do so. If the AO was marked as not reporting it, the cache
state was used to determine whether playback was interrupted due to slow
input.
This caused problems in some cases, such as video with very low video
frame rate: when a new frame is displayed, a new frame has to be
decoded, and since there it's so much further into the file (long frame
durations), the cache gets into an underrun state for a short moment,
even though both audio and video are playing fine. Enlarging the audio
buffer didn't help.
Fix this by making all AOs report underruns. If the AO driver does not
report underruns, fall back to using the buffer state.
pull.c behavior is slightly changed. Pull AOs are normally intended to
be used by pseudo-realtime audio APIs that fetch an audio buffer from
the API user via callback. I think it makes no sense to consider a
buffer underflow not an underrun in any situation, since we return
silence to the reader. (OK, maybe the reader could check the return
value? But let's not go there as long as there's no implementation.)
Remove the flag from ao_sdl.c, since it just worked via the generic
mechanism. Make the redundant underrun message verbose only.
push.c seems to log a redundant underflow message when resuming (because
somehow ao_play_data() is called when there's still no new data in the
buffer). But since ao_alsa does its own underrun reporting, and I only
use ao_alsa, I don't really care.
Also in all my tests, there seemed to be a rather high delay until the
underflow was logged (with audio only). I have no idea why this happened
and didn't try to debug this, but there's probably something wrong
somewhere.
This commit may cause random regressions.
See: #7440
|
|
|
|
|
|
|
|
|
|
|
|
| |
As requested I guess. It behaves quite similar to the --loop* options.
Not quite happy with the idea that 1) the option is mutated on each
operation (but at least it's consistent with --loop* and doesn't require
more properties), and 2) the ab-loop command will do nothing once all
loop iterations are done. As a concession, the OSD shows something about
"disabled".
Fixes: #7360
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Due to asynchronicity, we generally can't guarantee that a video frame
matches up with other events such as playback time change exactly (since
decoding, presentation, and property update all happen at different
times). This is a complaint in the referenced bug report, where
screenshot filenames in each-frame screenshot did not use the correct
timestamp, and instead was lagging behind by 1 frame.
But in this case, synchronicity was already pretty much forced with wait
calls. The only problem was that the playback time was updated at a
later time, which results in the observed 1 frame lag. Fix this by
moving the place where the screenshot is triggered in this mode.
Normal screenshots may still have the old problem. There is no effort
made to guarantee the timestamps absolutely line up, same as with the
OSD. (If you want a guarantee, you need to use a video filter, such as
libavfilter's drawtext. These will obviously use the proper timestamp,
instead of going through the somewhat asynchronous property etc. system
in the player frontend.)
Fixes: #7433
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This simply didn't set the direction flag in most situations, which
meant the timestamps used in the subtitle renderer were nonsense,
leading to invisible subtitles.
This works only for text subtitles that are cached in the ASS_Track
state. Reading new subtitles is broken because the demuxer layer has
trouble returning subtitle packets backwards, and I think for rendering
bitmap subtitles, the pruning direction would have to be adjusted. (Not
sure if reversing the timestamps before the subtitle renderer backend is
even the right thing to do. At least for sd_ass.c, it seems to make
sense, because it caches subtitles with "normal" timestamps.)
|
|
|
|
| |
This reverts commit 65a317436df05000366af2738bdbb834e95e33db.
|
|
|
|
|
| |
Follow up to commit a58585d5e063. It turned out that the OSX backend
needs this.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
When using --keep-open, and the end of the file is reached, the player's
"pause" property is set to true. Attempting to set it to false reverts
it back to true immediately. That's how it's designed, for better or
worse.
Running "seek -10 ; set pause no" did not work, because the seek is
first queued and pause is unset, but then the decoding functions
determine that EOF is still a thing, and "mpctx->stop_play =
AT_END_OF_FILE;" is set again. handle_keep_open() then sets pause again.
Only then the seek is actually run.
Fix this by not setting stop_play if a seek is queued.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
I intend to rewrite this code approximately every 2 months.
Last time, I did this in commit d66eb93e5d4 (and 065c307e8e7 and
b2006eeb74f). It was intended to remove the roundabout synchronous
thread "ping pong" when observing properties. At first, the original
async. code was replaced with some nice mostly synchronous code. But
then an async. code path had to be added for vo_libmpv, and finally the
sync. code was dropped because it broke in other obscure cases (like the
Objective-C Cocoa backend).
Try again. This time, update properties entirely on the main thread.
Updates get batched out on every playloop iteration. (At first I wanted
it to make it every time the player goes to sleep, but that might starve
API clients if the playloop get saturated.) One nice thing is that
clients only get woken up once all changed events have been sent, which
might reduce overhead.
While this sounds simple, it's not. The main problem is that reading
properties must not block the client API, i.e. no client API locks can
be held while reading the property. Maybe eventually we can avoid this
requirement, but currently it's just a fact. This means we have to
iterate over all clients and then over all properties (of each client),
all while releasing all locks when updating a property. Solve this by
rechecking on each iteration whether the list changed, and if so,
aborting the iteration and redo it "next time".
High risk change, expect bugs such as crashes and missing property
updates.
|
|
|
|
|
|
|
| |
These all have been replaced recently.
There was a leftover in window.swift. It couldn't have done anything
useful in the current state of the code, so drop these lines.
|
|
|
|
|
| |
The client API doesn't use input_ctx anymore, and the "wakeup" flag is
gone (if it even existed at all).
|
|
|
|
|
|
|
|
|
|
|
| |
Do it after decoding etc., but before waiting for input. This seems to
make more sense, because whether a queued seek can be applied depends on
the playback state. So it sounds like a good idea to apply the seek
first thing, but it's a bad idea to go to sleep if there's still a
queued seek pending (that couldn't be processed earlier).
Also add an empty line before mp_wait_events(); it doesn't really have
to do with the filter bullshit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If you have a normal file with audio and video, and keep "spamming"
forward hr-seeks, the player just kept showing the last video frame
instead of exiting or playing the next file. This started happening
since commit 6bcda94cb. Although not a bug per se, it was odd, and very
user-noticable.
The main problem was that the pending seek command was processed before
the EOF was "noticed". Processing the command reset everything, so the
player did not terminate playback, but repeated the seek.
This commit restores the old behavior.
For one, it makes video return the correct status (video.c). The
parameter is a bit ugly, but better than duplicating the logic or having
another MPContext field. (As a minor detail, setting r=VD_EOF makes sure
have_new_frame() returns true, rather than going through another
iteration or whatever the hell will happen instead, which would clobber
logical_eof.)
Another thing is making the seek logic actually wait until the seek
outcome has been determined if audio is also active. Audio needs to wait
for video in order to get the video seek target position. (Which in turn
is because hr-seek still "snaps" to video frames. You can't seek in
between two frames, so audio can't just use the seek target, but always
has to wait on the timestamp of the video frame. This has other
disadvantages and is a misdesign, but not something I'll fix today.)
In theory, this might make hr-seeks less responsive, because it needs to
fully decode/filter the audio too, but in practice most time is spent on
video, which had to be fully decoded before this change. (In general,
hr-seek could probably just show a random frame when a queued hr-seek
overrides the current hr-seek, which would probably lead to a better
user experience, but that's out of scope.)
Fixes: #7206
|
|
|
|
|
| |
No actual functional changes. Just preparation for the next commit, to
reduce its diff.
|
|
|
|
|
|
| |
Certain backends (i.e. wayland) will need to do special things with the
mouse. It makes sense to expose the values of these options to them, so
they can behave correctly.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Instead of making m_config a special-case, it more or less uses the
underlying m_config_cache/m_config_shadow APIs properly. This makes the
player core a (relatively) equivalent user of the core option API. In
particular, this means that other threads can change core options with
m_config_cache_write_opt() calls (before this commit, this merely led to
diverging option values).
An important change is that before this commit, mpctx->opts contained
the "master copy" of all option data. Now it's just another copy of the
option data, and the shadow copy is considered the master. This is why
whenever mpctx->opts is written, the change needs to be copied to the
master (thus why this commits add a bunch of m_config_notify... calls).
If another thread (e.g. a VO) changes an option, async_change_cb is now
invoked, which funnels the change notification through the player's
layers.
The new self_notification parameter on mp_option_change_callback is so
that m_config_notify... doesn't trigger recursion, and it's used in
cases where the change was already "processed". It's still needed to
trigger libmpv property updates. (I considered using an extra
m_config_cache for that, but it'd only cause problems with no
advantages.)
I think the recent changes actually forgot to send libmpv property
updates in some cases. This should fix this anyway. In some cases,
property updates are reworked, and the potential for bugs should be
lower (probably).
The primary point of this change is to allow external updates, for
example by a VO writing the fullscreen option if the window state is
changed by the window manager (rather than mpv changing it). This is not
used yet, but the following commits will.
|
|
|
|
|
|
|
|
| |
The previous bunch of commits made this unnecessary, so this should be
a purely internal change with no user impact.
This may or may not open the way to future improvements. Even if not,
at least the property/option interaction should now be much less buggy.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Convert some remaining properties to work without the option-to-property
bridge. Behavior shouldn't change (except for the corner case that it
tries to reapply the new state when setting a property, while it used to
ignore redundant sets).
As it is the case with many of these changes, much of the code is not in
its final proper state yet, but is rather a temporary workaround. For
example, these "VO flag" properties should just be fully handled in the
VO backend. (Currently, the config or VO layers don't provide enough
mechanism yet as that all the backends like x11, win32, etc. could be
changed yet, but that's another refactoring mess for another time.)
Now nothing relies on this option-to-property bridge anymore, which
opens the way to even more refactoring, which eventually may result in
tiny improvements for the end user.
|
|
|
|
|
|
|
|
| |
These should not be needed, since video is in EOF mode in this case
anyway.
Not too sure about the video.c case to be honest, well, here goes
nothing.
|
|
|
|
|
|
|
|
| |
There isn't really a need to disable this for local playback. I think
originally I did this because I was afraid the code could mess up or be
annoying on local mode, but that's not really a good argument. I'd
rather test this code in local mode too. In this case, it shouldn't
really happen that it runs out of cache in the first place.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
The --cache-pause feature (enabled by default) will pause playback for a
while if network runs out of data. If this is not done, then playback
will go on frame-wise (as packets are slowly read from the network and
then instantly decoded and displayed). This feature is actually useless,
as you won't get nice playback no matter what if network is too slow,
but I guess I still prefer this behavior for some reason.
This commit changes this behavior from using the demuxer cache state
only, to trying to use underrun information from the AO/VO. This means
if you have a very large audio buffer, then cache-pausing will trigger
once that buffer is depleted, which will be some time _after_ the
demuxer cache has run out.
This requires explicit support from the AO. Otherwise, the behavior
should be mostly the same as before this commit.
This does not care about the AO buffer. In theory, the AO may underrun,
then the player will write some data to the AO buffer, then the AO will
recover and play this bit of data, then the player will probably trigger
the cache-pause behavior. The probability of this happening should be
pretty low, so I will hold off fixing this until the next refactor of
the AO chain (if ever).
The VO underflow detection was devised and tested in 5 minutes, and may
not be correct. At least I'm fairly sure that the combination of all the
factors should make incorrect behavior relatively unlikely, but problems
are possible.
Also, the demux_reader_state.underrun field may be inaccurate. It's only
the present state at the time demux_get_reader_state() was called, and
may exclude past underruns. In theory, this could cause "close" cases to
be missed. Then you might get an audio underrun without cache-pausing
acting on it. If the stars align, this could happen multiple times in
the row, effectively making this feature not work.
The most user-visible consequence of this change is that the user
will now see an AO underrun warning every time the cache runs out.
Maybe this cache-pause feature should just be removed...
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
If a file format supports PTS resets, get_current_pos_ratio calculates
the ratio using the stored filepos in the demuxer struct instead of a
standard query of the current time in the stream and its total length.
This seems like a reasonable way to avoid weird PTS values, but in
reality this just causes problems and results in inaccurate ratio
values that can affect other parts of the player (most notably the osc
seekbar).
For libavformat formats, demux->filepos is obtained from the
demux_lavf_fill_buffer function which is called on the next packet. The
problem is that there is a slight delay between packets and in some
cases, this delay can be relatively large. That means the obtained
demuxer->filepos value will be very inaccurate since it obtains the pos
from the end of the upcoming packet and not its actual current position.
This is especially noticeable at the very beginning of playback where
get_current_pos_ratio sometimes returns a value of well over 2% despite
less than a second passing in the stream. Another telltale sign is to
simply watch the osc seekbar as a stream progresses and observe how it
loads in staggered steps as every packet is decoded. In contrast, the
seekbar progresses smoothly on the playback of a format that does not
support PTS resets. The simple solution is to instead use the query of
the current time and length of a stream and calculate the ratio that
way.
get_current_pos_ratio will still fallback on using the byte stream
position if the previous queries fail. However, get_current_time will
be more accurate in the vast majority of cases and should be the
preferred method of calculating the position ratio.
|
|
|
|
|
|
|
|
| |
Track switching doesn't run reset_playback_state(), so a track enabled
at runtime during backward playback would lead to a messed up state.
This commit just does a bad code monkey fix to this. It feels like there
needs to be a much better way to propagate this state.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Another shitty obscure feature that usually nobody notices.
Unsurprisingly, it doesn't go well with backward playback mode.
If you use --keep-open in forward playback mode, and seek past the end
of the file, it tries to seek to the very last frame. The demuxer will
seek to the last "keyframe" before the end (i.e. some frames to go in
most cases), and trying to hr-seek to the file duration often won't cut
it, so this requires some special code. The function at hand seeks
"close" to the end, and then stops hr-seek when the last frame us
encountered (simple enough and very effective).
In backward playback mode, start and end are reversed, and we need to
seek "close" to the start of the file instead. Simple enough to do, and
it works.
One problem is that command.c has some weird logic to make going beyond
the last chapter either end playback (--keep-open=no), or jump to the
last frame. Now this will jump to the first frame, which is weird, but
let's ignore this.
Another problem is that seeking before playback start position hits EOF
in backward playback mode, which is a demuxer bug, and has nothing to do
with this code. But it triggers this code, so seeking before the start
will show the "last" frame. (My description is a mess with directions.
Figure it out yourself.)
|
|
|
|
|
|
|
|
|
|
|
| |
Obviously should seek back to the end of the file when it loops.
Also remove some minor code duplication around start times. This isn't
the correct solution by the way. Rather than hoping we know a reasonable
start/end time, this stuff should instruct the demuxer to seek to the
exact location. It'll work with 99% of all normal files, but add an
appropriate comment (that basically says the function is bullshit) to
get_start_time() anyway.
|
|
|
|
|
|
| |
Not sure if this is better or worse.
Some minor behavior changes.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This changes the behavior of the --ab-loop-a/b options. In addition, it
makes it work with backward playback mode.
The most obvious change is that the both the A and B point need to be
set now before any looping happens. Unlike before, unset points don't
implicitly use the start or end of the file. I think the old behavior
was a feature that was explicitly added/wanted. Well, it's gone now.
This is because of 2 reasons:
1. I never liked this feature, and it always got in my way (as user).
2. It's inherently annoying with backward playback mode.
In backward playback mode, the user wants to set A/B in the wrong order.
The ab-loop command will first set A, then B, so if you use this command
during backward playback, A will be set to a higher timestamps than B.
If you switch back to forward playback mode, the loop would stop
working. I want the loop to just continue to work, and the chosen
solution conflicts with the removed feature.
The order issue above _could_ be fixed by also switching the AB-loop
user option values around on direction switch. But there are no other
instances of option changes magically affecting other options, and doing
this would probably lead to unexpected misery (dying from corner cases
and such).
Another solution is sorting the A/B points by timestamps after copying
them from the user options. Then A/B options set in backward mode will
work in forward mode. This is the chosen solution. If you sort the
points, you don't know anymore whether the unset point is supposed to
signify the end or the start of the file.
The AB-loop code is slightly better abstracted now, so it should be easy
to restore the removed feature. It would still require coming up with a
solution for backwards playback, though.
A minor change is that if one point is set and the other is unset, I'm
rendering both the chapter markers and the marker for the set point.
Why? I don't know. My test file had chapters, and I guess I decided this
looked better.
This commit also fixes some subtle and obvious issues that I already
forgot about when I wrote this commit message. It cleans up some minor
code duplication and nonsense too.
Regarding backward playback, the code uses an unsanitary mix of internal
("transformed") and user timestamps. So the play_dir variable appears
more than usual.
To mention one unfixed issue: if you set an AB-loop that is completely
past the end of the file, it will get stuck in an infinite seeking loop
once playback reaches the end of the file. Fixing this reliably seemed
annoying, so the fix is "just don't do this". It's not a hard freeze
anyway.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
This code attempts to seek to the last frame by seeking close to the
end, and then decoding until the last frame has been reached. To do so
it sets hrseek_lastframe, which for video enables some logic to "catch"
this last frame, and completely ignores hrseek_pts. But audio still may
use hrseek_pts
I don't know if the original author (me) was thinking, if anything, when
setting this variable to 1e99, essentially a random, number. It's very
large, and a timestamp like this will never happen, so it does its job.
But it's random.
Use INFINITY instead. It will skip all audio samples in the audio code
correctly. This change doesn't fix anything, but it does get rid of the
random looking number.
|
| |
|
|
|
|
|
|
| |
Just rearranging shit. Setting SEEK_HR for backstep seeks actually
doesn't have much meaning, but disables the weird audio snapping for
"keyframe" seeks, and I don't know it's late.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
See manpage additions. This is a huge hack. You can bet there are shit
tons of bugs. It's literally forcing square pegs into round holes.
Hopefully, the manpage wall of text makes it clear enough that the whole
shit can easily crash and burn. (Although it shouldn't literally crash.
That would be a bug. It possibly _could_ start a fire by entering some
sort of endless loop, not a literal one, just something where it tries
to do work without making progress.)
(Some obvious bugs I simply ignored for this initial version, but
there's a number of potential bugs I can't even imagine. Normal playback
should remain completely unaffected, though.)
How this works is also described in the manpage. Basically, we demux in
reverse, then we decode in reverse, then we render in reverse.
The decoding part is the simplest: just reorder the decoder output. This
weirdly integrates with the timeline/ordered chapter code, which also
has special requirements on feeding the packets to the decoder in a
non-straightforward way (it doesn't conflict, although a bugmessmass
breaks correct slicing of segments, so EDL/ordered chapter playback is
broken in backward direction).
Backward demuxing is pretty involved. In theory, it could be much
easier: simply iterating the usual demuxer output backward. But this
just doesn't fit into our code, so there's a cthulhu nightmare of shit.
To be specific, each stream (audio, video) is reversed separately. At
least this means we can do backward playback within cached content (for
example, you could play backwards in a live stream; on that note, it
disables prefetching, which would lead to losing new live video, but
this could be avoided).
The fuckmess also meant that I didn't bother trying to support
subtitles. Subtitles are a problem because they're "sparse" streams.
They need to be "passively" demuxed: you don't try to read a subtitle
packet, you demux audio and video, and then look whether there was a
subtitle packet. This means to get subtitles for a time range, you need
to know that you demuxed video and audio over this range, which becomes
pretty messy when you demux audio and video backwards separately.
Backward display is the most weird (and potentially buggy) part. To
avoid that we need to touch a LOT of timing code, we negate all
timestamps. The basic idea is that due to the navigation, all
comparisons and subtractions of timestamps keep working, and you don't
need to touch every single of them to "reverse" them.
E.g.:
bool before = pts_a < pts_b;
would need to be:
bool before = forward
? pts_a < pts_b
: pts_a > pts_b;
or:
bool before = pts_a * dir < pts_b * dir;
or if you, as it's implemented now, just do this after decoding:
pts_a *= dir;
pts_b *= dir;
and then in the normal timing/renderer code:
bool before = pts_a < pts_b;
Consequently, we don't need many changes in the latter code. But some
assumptions inhererently true for forward playback may have been broken
anyway. What is mainly needed is fixing places where values are passed
between positive and negative "domains". For example, seeking and
timestamp user display always uses positive timestamps. The main mess is
that it's not obvious which domain a given variable should or does use.
Well, in my tests with a single file, it suddenly started to work when I
did this. I'm honestly surprised that it did, and that I didn't have to
change a single line in the timing code past decoder (just something
minor to make external/cached text subtitles display). I committed it
immediately while avoiding thinking about it. But there really likely
are subtle problems of all sorts.
As far as I'm aware, gstreamer also supports backward playback. When I
looked at this years ago, I couldn't find a way to actually try this,
and I didn't revisit it now. Back then I also read talk slides from the
person who implemented it, and I'm not sure if and which ideas I might
have taken from it. It's possible that the timestamp reversal is
inspired by it, but I didn't check. (I think it claimed that it could
avoid large changes by changing a sign?)
VapourSynth has some sort of reverse function, which provides a backward
view on a video. The function itself is trivial to implement, as
VapourSynth aims to provide random access to video by frame numbers (so
you just request decreasing frame numbers). From what I remember, it
wasn't exactly fluid, bu |