summaryrefslogtreecommitdiffstats
path: root/etc
Commit message (Collapse)AuthorAgeFilesLines
* encoding_profiles.conf: update and remove deprecated stuffRicardo Constantino2017-04-071-59/+21
| | | | | | | | | - libfaac and libvo_aacenc were removed from FFmpeg - add libopus profile - modify vp8's ovcopts and add vp9 - switch enc-f-webm to vp9 + opus - remove obsolete devices profiles using deprecated filters
* etc/mpv.conf: remove deprecated optionswm42017-04-051-16/+9
| | | | | | This hasn't been updated for a while. Some options are deprecated (--softvol), semi-deprecated or virtually useless (e.g. --vo and --ao), or use old-syntax (--sub-codepage).
* player: make screenshot commands honor the async flagwm42017-04-011-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | And also change input.conf to make all screenshots async. (Except the every-frame mode, which always uses synchronous mode and ignores the flag.) By default, the "screenshot" command is still asynchronous, because scripts etc. might depend on this behavior. This is only partially async. The code for determining the filename is still always run synchronously. Only encoding the screenshot and writing it to disk is asynchronous. We explicitly document the exact behavior as undefined, so it can be changed any time. Some of this is a bit messy, because I wanted to avoid duplicating the message display code between sync and async mode. In async mode, this is called from a worker thread, which is not safe because showing a message accesses the thread-unsafe OSD code. So the core has to be locked during this, which implies accessing the core and all that. So the code has weird locking calls, and we need to do core destruction in a more "controlled" manner (thus the outstanding_async field). (What I'd really want would be the OSD simply showing log messages instead.) This is pretty untested, so expect bugs. Fixes #4250.
* osx: fix key input in certain circumstancesAkemi2017-03-261-1/+0
| | | | | | | | | | | | | for a reason i can just assume some key events can vanish from the event chain and mpv seems unresponsive. after quite some testing i could confirm that the events are present at the first entry point of the event chain, the sendEvent method of the Application, and that they vanish at a point afterwards. now we use that entry point to grab keyDown and keyUp events. we also stop propagating those key events to prevent the no key input' error sound. if we ever need the key events somewhere down the event chain we need to start propagating them again. though this is not necessary currently.
* mpv.desktop: fix some mistakes in mpv.desktopgiwhub2017-03-231-6/+6
| | | | Signed-off-by: wm4 <wm4@nowhere>
* mpv.desktop: add translation for [da]scootergrisen2017-02-131-0/+3
|
* input.conf: change "L" to change loop-file by defaultwm42017-01-312-1/+5
|
* player: fix previous commitwm42016-10-031-2/+2
| | | | ...
* player: allow opts in pseudo-gui set by the user to override user's defaultRicardo Constantino2016-09-261-0/+3
| | | | | | | | | | | | | | | | | | | | | This should still allow user-set default options to override built-in pseudo-gui while respecting user-set pseudo-gui options. Pros: - user option in default profile overrides built-in pseudo-gui's options Ex: screenshot-directory overrides built-in pseudo-gui's - user can "fix" pseudo-gui if some option like "force-window=no" is set in default by setting "force-window=yes" in [pseudo-gui] - `mpv --profile=pseudo-gui` will work as before Cons: - --show-profile=pseudo-gui won't display the built-in's options Original idea from wm4. Documentation edits mostly by wm4. Signed-off-by: wm4 <wm4@nowhere>
* player: do not let pseudo-gui override user config settingswm42016-09-231-1/+1
| | | | | | | | Seems like this confused users quite often. Instead of --profile=pseudo-gui, --player-operation-mode=pseudo-gui now has to be used to invoke pseudo GUI mode. The old way still works, and still behaves in the old way.
* etc/builtin.conf: minor editswm42016-09-151-2/+6
| | | | | | | | The previous commit merely copied the profile string to a file (plus changing how RPI-specific defaults are initialized), now make some changes on top of it. In particular, remove the --input-lirc option, which was removed a long time ago, but forgotten from the libmpv profile.
* player: move builtin profiles to a separate filewm42016-09-151-0/+40
| | | | | | | | | Move the embedded string with the builtin profiles to a separate builtin.conf file. This makes it easier to read and edit, and you can also check it for errors with --include=etc/builtin.conf. (Normally errors are hidden intentionally, because there's no way to output error messages this early, and because some options might not be present on all platforms or with all configurations.)
* manpage: remove more references to deprecated sub-option syntaxwm42016-09-071-3/+5
| | | | Fixes #3497.
* Use - as command-name separator everywhereTimotej Lazar2016-07-143-11/+11
| | | | | | | Old-style commands using _ as separator (e.g. show_progress) were still used in some places, including documentation and configuration files. This commit updates all such instances to the new style (show-progress) so that commands are easier to find in the manual.
* etc/mpv.conf: add missing commentwm42016-05-231-1/+1
| | | | | The config file is an example, and is not supposed to actually define anything by default.
* command: if only ab-loop-b is set, loop from start of filewm42016-04-211-1/+1
| | | | | | | | | | Commit 382bafcb changed the behavior for ab-loop-a. This commit changes ab-loop-b so that the behavior is symmetric. Adjust the OSD rendering accordingly to the two changes. Also fix mentions of the "ab_loop" command to the now preferred "ab-loop".
* mplayer-input.conf: fix input.conf location in commentBen Boeckel2016-03-311-1/+1
|
* mpv.conf: add some more optionswm42016-02-131-0/+8
| | | | | Seems like questions related to functionality covered by them are quite often asked.
* mpv.conf: adjustmentswm42016-02-081-23/+32
| | | | | In particular, get rid of the "vdpau" example profile, as it's pretty useless and misleading.
* player: implement SWITCH for dvb-channel-name property, add binding.Oliver Freyermuth2016-01-141-0/+4
| | | | | | | | The binding is similar to the tv-binding, just with capital letters. Switching the dvb-channel-name property compared to dvb-channel means the channel-name is shown on-screen when switching instead of "dvb-channel (error)" otherwise, and switching anyways happens without changing the card.
* etc: rename "example.conf" to "mpv.conf"Dmitrij D. Czarkoff2016-01-111-0/+0
|
* mpv.desktop: add audio/mp4 mime typewm42016-01-071-1/+1
| | | | Who thought mime types were a good idea?
* example.conf: minor changeswm42015-12-291-12/+10
| | | | | | In particular, the player inserts af_scaletempo by default now when changing speed, so the suggestion to add this was missleading and counter-productive.
* input.conf: remove a redundant and a broken examplewm42015-12-221-2/+0
| | | | | | | window-scale is now mapped to Alt+0 etc. by default (although these bindings just use "set", not "cycle-values"). colormatrix can't be cycled anymore (would require using vf_format).
* input.conf: erase `audio-delay` from `Not assigned by default`openingnow2015-12-221-2/+0
| | | | | | | `ctrl+ +`is assigned as `add audio-delay` by default. Tested by running `mpv --input-test --force-window --idle` Signed-off-by: wm4 <wm4@nowhere>
* input.conf: add default bindings for changing window scalewm42015-11-171-0/+3
| | | | | | These are very much inspired by the hardcoded Cocoa bindings on OSX. Fixes #2500.
* SVG version of the icon (with symbolic counterpart)Evgeny Kolesnikov2015-10-303-0/+352
|
* input.conf: remap d/D keyswm42015-08-042-2/+3
| | | | | | | | | | Drop d for toggling framedrop. Toggling this is way too special to be at such a prominent place, and in fact I believe toggling it is pointless. Remap deinterlacing from D to d. It's relatively useful and non- destructive. As suggested in #973 (almost).
* player: remove higher-level remains of DVD/BD menu supportwm42015-08-032-39/+0
| | | | | | | | | | | | | | | Nobody wanted to restore this, so it gets the boot. If anyone still wants to volunteer to restore menu support, this would be welcome. (I might even try it myself if I feel masochistic and like wasting a lot of time for nothing.) But if it does get restored, it should be done differently. There were many stupid things about how it was done. For example, it somehow tried to pull mp_nav_events through all the layers (including needing to "buffer" them in the demuxer), which was needlessly complicated. It could be done simpler. This code was already inactive, so this commit actually changes nothing. Also keep in mind that normal DVD/BD playback still works.
* manpage: document --audio-channels=auto caveatswm42015-07-251-2/+3
| | | | | | | This is an unfortunate fact of life. Maybe making this the default wasn't such a good idea after all. Also update etc/example.conf. It used an obsolete alias for "auto".
* player: use exit code 0 by default for quit, 4 for signals, etc.Philip Sequeira2015-07-111-4/+4
| | | | | | Default key bindings in encoding mode also use code 4, because scripts will probably want to fail if encoding is aborted (leaving an incomplete file).
* input.conf: invert mouse volume controlMartin Herkt2015-06-301-2/+2
| | | | Scrolling right should increase volume, not decrease it.
* inpout.conf: make shift+o toggle between 2 states onlywm42015-06-032-1/+5
| | | | | | | | | | | | | The "osd" command cycles between 4 states (OSD level 0-3), which is probably confusing and inconvenient. OSD levels 0 and 2 are rarely needed. I would claim there is normally not much of a need to completely disable OSD by setting level 0 during playback. Level 2 is just slightly less information than level 3, and I'm not sure why it exists at all. Change it so that it toggles between level 3 and 1. Note that this ignores the default OSD level. If the default is 3, the first use of this key will set it to 3 again. Just assume 1 is the default. If someone complains, this could be improved.
* input: allow - as separator between commands, instead of _wm42015-05-251-21/+21
| | | | | | | | | | Wnile it seems quite logical to me that commands use _ as word separator, while properties use -, I can't really explain the difference, and it tends to confuse users as well. So always prefer - as separator for everything. Using _ still works, and will probably forever. Not doing so would probably create too much chaos and confusion.
* mpv.desktop: shorten polish nameMateusz Łukasik2015-05-181-1/+1
| | | | | | The Polish name was too long and contradicted. One word is enough. Signed-off-by: wm4 <wm4@nowhere>
* input.conf: add CTRL+s key binding for window screenshotswm42015-05-171-0/+1
|
* input.conf: map L to toggle infinite loopingwm42015-04-271-0/+1
|
* input.conf: unmap menu keywm42015-04-141-1/+0
| | | | | | This was mapped to a broken command, so it did nothing but printing an error message. The intended binding (cycling OSD level) doesn't seem to useful either, so just drop it.
* mpv.desktop: remove NoDisplaywm42015-04-021-1/+0
| | | | | | | | | | The standard say: NoDisplay means "this application exists, but don't display it in the menus". Now that --force-window --idle is enabled, we can remove it. Closes #1755.
* player: add "pseudo-gui" profilewm42015-04-021-1/+1
| | | | | | | | | | | | | | This can be set to select a number of default settings that help mpv pretend that it has a GUI. I haven't decided yet whether I really want to use the profile mechanism for this. There are a number of weird details that are not so easy to handle with profiles, such as disabling pseudo-gui mode again (you can't unset profiles directly). So this might change. But for now it will do. There also should be a better way to store builtin profiles. Unfortunately, the old crappy MPlayer config file parser needs on-disk files, so just use a bunch of function calls for now.
* input: remove Linux joystick supportwm42015-03-242-30/+0
| | | | | | | | | | | Why did this exist in the first place? Other than being completely useless, this even caused some regressions in the past. For example, there was the case of a laptop exposing its accelerometer as joystick device, which led to extremely fun things due to the default mappings of axis movement being mapped to seeking. I suppose those who really want to use their joystick to control a media player (???) can configure it as mouse device or so.
* input.conf: add key binding to override ASS subtitle styleswm42015-03-081-0/+3
|
* input: use flag option type for some input commandswm42015-03-041-5/+5
| | | | | | | | | | This gets rid of the need for a second (or more) parameters; instead it can be all in one parameter. The (now) redundant parameter is still parsed for compatibility, though. The way the flags make each other conflict is a bit tricky: they have overlapping bits, and the option parser disallows setting already set bits.
* etc/input.conf: remove a leftoverwm42015-02-161-2/+0
| | | | This is already mapped by default.
* mpv.desktop: Add zh-TW and zh-CN translationsSkyrainfit2015-02-161-1/+6
|
* input.conf: bind 'A' to cycling aspect ratioswm42015-01-261-0/+2
| | | | | | | | | | Apparently broken files are popular enough that this is still needed. It's relatively often asked on the IRC channel, and I also found it on the archwiki mpv page. The list of aspect ratios is taken from the archwiki page, with "16:10" removed (because I doubt there are actually files with this aspect ratio).
* input.conf: add example for aspect ratio cyclingwm42014-12-081-0/+2
| | | | | This is requested oftem, but I don't know if it should be an actual default binding.
* input.conf: add some additional bindingswm42014-11-191-0/+4
|
* restore-old-bindings.conf: add recently changed bindingwm42014-11-161-0/+4
|
* input.conf: Don't make ENTER exit the playerChrisK22014-11-151-1/+1
| | | | Apparently this is confusing.
* etc/mplayer-input.conf: fix off by one errorwm42014-10-101-1/+1
| | | | | | | | | playlist-pos is 0-based, but everyone thinks it's 1-based. Stupid crap. (The "not the same as MPlayer" refers to a playlist manipulation command that doesn't exist anymore in mpv.) CC: @mpv-player/stable
* etc: add an input config file that reverts recent key binding changeswm42014-10-051-0/+31
| | | | | | | This is for users who don't like changes. I'm hoping it will make the process of cleaning up key bindings less bumpy. It should be mentioned in the release notes of the next release.
* mpv.desktop: add more ogg-related mime typesAlessandro Ghedini2014-09-291-1/+1
| | | | Also adds audio/ogg and video/ogg.
* options: remove --volstepwm42014-09-211-12/+12
| | | | | | | It's just confusing; users are encouraged to edit input.conf instead (changing the argument to the "add" command). Update input.conf to keep the old behavior.
* input.conf: map ESC to exiting fullscreenwm42014-09-151-1/+1
| | | | | | | | | | Apparently making ESC exit fullscreen mode is the more popular convention compared to ESC quitting the program. It was also concluded that ESC should do nothing when the windows is already in normal state. See discussion in #973.
* mplayer-input.conf: fix broken bindingwm42014-09-061-1/+1
| | | | | | | "#" starts a comment, so the # key needs to be handled specially. MPlayer has the same issue, but its input.conf is wrong. Or at least I think it's wrong; looking at the MPlayer code it's doubtful they somehow special-case and handle this.
* command: remove broken quvi-format propertywm42014-09-011-2/+0
| | | | Never really worked, and libquvi is probably a lost cause anyway.
* player: redo how stream caching and pausing on low cache workswm42014-08-271-1/+1
| | | | | | | | | | | | | | | | | | | Add the --cache-secs option, which literally overrides the value of --demuxer-readahead-secs if the stream cache is active. The default value is very high (10 seconds), which means it can act as network cache. Remove the old behavior of trying to pause once the byte cache runs low. Instead, do something similar wit the demuxer cache. The nice thing is that we can guess how many seconds of video it has cached, and we can make better decisions. But for now, apply a relatively naive heuristic: if the cache is below 0.5 secs, pause, and wait until at least 2 secs are available. Note that due to timestamp reordering, the estimated cached duration of video might be inaccurate, depending on the file format. If the file format has DTS, it's easy, otherwise the duration will seemingly jump back and forth.
* input.conf: bind ctrl+cwm42014-08-221-0/+1
| | | | | Just like I can terminate it on the terminal with this key combination, I want to be able to do the same on the X window.
* etc/mpv.desktop: add audio/flac mimetypewm42014-08-211-1/+1
| | | | | | Fixes #1025. CC: @mpv-player/stable
* example.conf: demuxer-thread is now enabled by defaultwm42014-08-191-3/+2
| | | | Provide a more useful example instead.
* input.conf: add some bindings for changing audio-delaywm42014-08-111-0/+2
| | | | | | Requested on: https://github.com/mpv-player/mpv/commit/90ec3334174e80c16f00971886223a3afabc1aca#commitcomment-7331673 Might remove or remap them again later.
* input.conf: make explanatory text more readablewm42014-08-111-30/+15
| | | | | Or at leats this is the intention. It's a bit hard to tell which information is needed, and which not.
* input.conf: change LEFT/RIGHT keys to seek 5s instead of 10swm42014-08-111-2/+2
|
* input.conf: map shift+pgup/dwn to the old seek bindingswm42014-08-091-2/+4
|
* etc/example.conf: update cache optionswm42014-08-091-4/+10
| | | | | | | Some of them changed semantics or got renamed. Note that the replacements in the example.conf are not necessarily the equivalents of the replaced options.
* etc: add mplayer-input.confwm42014-08-091-0/+153
|
* input.conf: switch chapter seek next/previous keyswm42014-08-081-2/+2