diff options
Diffstat (limited to 'DOCS/Polish/mplayer.1')
| -rw-r--r-- | DOCS/Polish/mplayer.1 | 643 |
1 files changed, 643 insertions, 0 deletions
diff --git a/DOCS/Polish/mplayer.1 b/DOCS/Polish/mplayer.1 new file mode 100644 index 0000000000..8565cec0f9 --- /dev/null +++ b/DOCS/Polish/mplayer.1 @@ -0,0 +1,643 @@ +.\" MPlayer (C) 2000-2001 Arpad Gereoffy <arpi@esp-team.scene.hu> +.\" This manpage was/is done by Gabucino +.\" +.TH MPlayer +.SH NAME +mplayer \- Movie Player for Linux +.SH SYNOPSIS +.B mplayer +.RB [ \-gui ] +.RB [ \-v ] +.RB [ \-quiet ] +.RB [ \-vo\ <driver>[:<device>] ] +.RB [ \-ao\ <driver>[:<device>] ] +.RB [ \-vcd\ track\ number ] +.RB [ \-sb\ byte\ position ] +.RB [ \-nosound ] +.RB [ \-abs\ bytes ] +.RB [ \-delay\ secs ] +.RB [ \-nobps ] +.RB [ \-aid\ id ] +.RB [ \-vid\ id ] +.RB [ \-fps\ rate ] +.RB [ \-mc\ seconds/5f ] +.RB [ \-fs ] +.RB [ \-vm ] +.RB [ \-zoom ] +.RB [ \-x\ x ] +.RB [ \-y\ y ] +.RB [ \-xy\ factor ] +.RB [ \-pp\ quality ] +.RB [ \-include\ configfile ] +.RB [ \-lircconf\ configfile ] +.RB [ \-ffactor\ number ] +.RB [ \-sub\ file ] +.RB [ \-subfps\ rate ] +.RB [ \-subdelay\ sec ] +.RB [ \-z\ <0-8> ] +.RB [ \-idx ] +.RB [ \-forceidx ] +.RB [ \-nodshow ] +.RB [ \-noxv ] +.RB [ \-forcexv ] +.RB [ \-ss\ time ] +.RB [ \-dumpaudio ] +.RB [ \-dumpvideo ] +.RB [ \-dumpstream ] +.RB [ \-noframedrop ] +.RB [ \-framedrop ] +.RB [ \-nodouble ] +.RB [ \-double ] +.RB [ \-stereo\ mode ] +.RB [ \-channels\ n ] +.RB [ \-srate\ Hz ] +.RB [ \-osdlevel\ level ] +.RB [ \-config\ file ] +.RB [ \-display\ name ] +.RB [ \-unicode ] +.RB [ \-utf8 ] +.RB [ \-fsmode\ mode ] +.RB [ \-vc\ video\ codec\ name ] +.RB [ \-ac\ audio\ codec\ name ] +.RB [ \-vfm\ video\ codec\ family ] +.RB [ \-afm\ audio\ codec\ family ] +.RB [ \-frames\ number ] +.RB [ \-autoq\ quality ] +.RB [ \-fb\ device ] +.RB [ \-fbmode\ modename ] +.RB [ \-fbmodeconfig\ filename ] +.RB [ \-benchmark ] +.RB [ \-dvd\ titleid ] +.RB [ \-chapter\ chapterid ] +.RB [ \-dvdangle\ angleid ] +.RB [ \-dvdkey\ key ] +.RB [ \-skin\ skin ] +.RB [ \-aspect\ ratio ] +.RB [ \-monitoraspect\ ratio ] +.RB [ \-subcp\ codepage ] +.RB [ \-dumpmpsub ] +.RB [ \-screenw\ pixels ] +.RB [ \-screenh\ pixels ] +.RB [ \-cache\ kbytes ] +.RB [ \-bpp\ depth ] +.RB [ \-flip ] +.RB [ \-playlist\ <filename> ] +.RB [ \-slave ] +.I - or file or device +.PP +.SH DESCRIPTION +.I mplayer +MPlayer is a movie player for LINUX (runs on many other Unices, and +non-x86 CPUs, see section 6). It plays most MPEG, AVI and ASF/WMV files, +supported by many native and Win32 DLL codecs. You can watch VideoCD, +SVCD, DVD and even DivX movies too (and you don't need the avifile library +at all!). The another big feature of mplayer is the wide range of +supported output drivers. It works with X11, Xv, DGA, OpenGL, SVGAlib, +fbdev, AAlib, but you can use SDL (and this way all drivers of SDL) and +some lowlevel card-specific drivers (for Matrox, 3Dfx and Radeon) too! +Most of them supports software or hardware scaling, so you can enjoy +movies in fullscreen. And what about the nice big antialiased shaded +subtitles (7 supported types!!!) with european/ISO 8859-1,2 (hungarian, +english, czech, etc), cyrillic, korean fonts, and OSD? +.LP +.SH "GENERAL OPTIONS" +.TP +.I NOTE +Every "flag" option has "noflag" pair, e.g. -fs opposite is -nofs +.TP +.B \-gui +start MPlayer with the GUI mode. You have to compile it in, for details +see the documentation. +.TP +.B \-dvd\ titleid +tell MPlayer which movies (marked with titleid) to play. For example +sometimes '1' are trailers, and '2' is the real movie. +.TP +.B \-sid\ id +Turns on DVD subtitle displaying. Also, you MUST specify a number which +corresponds to a DVD subtitle language (1-...). For the list of available +subtitles, use with the -v switch and look at the output. (EXPERIMENTAL) +.TP +.B \-chapter\ chapterid +specify which chapter to start playing at. Examples can be found below. +.TP +.B \-dvdangle\ angleid +some DVD discs contain scenes that can be viewed from multiple angles. +Here you can tell MPlayer which angles to use. Examples can be found below. +.TP +.B \-vo\ <driver>[:<device>] +select video output driver and optinaly device. "device" is valid with +SDL and GGI too, it means sub-driver then (for example: -vo sdl:aalib). + +you can get the list of available drivers executing +.I mplayer -vo help + +.TP +.B \-ao\ <driver>[:<device>] +select audio output driver and optinaly device. "device" is valid with +SDL too, it means sub-driver then (for example: -vo sdl:esd). + +If using OSS, you can specify which sound device to use like this : +-ao oss:/dev/dsp1 (replaces the old -dsp option) + +you can get the list of available drivers executing +.I mplayer -ao help + +.TP +.B \-vcd\ track +play video cd track from device instead of plain file +.TP +.B \-nosound +don't play sound +.TP +.B \-fs +fullscreen playing (centers movie, and makes black +bands around it) +.TP +.B \-vm +try to change to a different video mode. dga2, x11 (XF86VidMode) and sdl +output drivers support it. +.TP +.B \-zoom +use software scaling, where available (use with -nofs). svga, x11, vesa +output drivers support it. +.TP +.B \-flip +flip image (useful for example for old Indeo codecs). Supported only(?) +by the 'sdl' and 'x11' outputs. +.TP +.B \-x\ x +scale image to x width [if driver suppports!] +.TP +.B \-y\ y +scale image to y height +.TP +.B \-xy\ factor +scale image by <factor> +.TP +.B \-pp\ quality +apply postprocess filter on decoded image. +You need a STRONG CPU in order to use this! +The supported formats and settings are: + + MPEG 1/2 0 (none), TODO + OpenDivX 0 (none), TODO + DivX4 0 (none), TODO + DivX 0 (none), TODO + + -pp 0x20000 TODO + +.TP +.B \-autoq\ quality +dynamically changes the level of postprocess, depending on spare CPU +time available. Uses the same value ranges as -pp . The number you +specify will be the maximum level used. Usually you can use some big +number. You don't have to (and don't) use together with -pp ! +.TP +.B \-ffactor\ number +resample alphamap of the font. Can be: + + 0 plain white fonts + 0.75 very narrow black outline [default] + 1 narrow black outline + 10 bold black outline +.TP +.B \-sub\ file +use/display this subtitle file +.TP +.B \-subfps\ rate +specify frame/sec rate of subtitle file +(ONLY for frame-based SUB files, i.e. NOT MicroDVD format!) +(default: the same as the movie) +.TP +.B \-subdelay\ sec +delays subtitles by <sec> seconds. Can be negative. +.TP +.B \-osdlevel\ level +specifies which mode the OSD should start in (0 : none, 1 : seek, 2: seek+timer) +(default = 2) +.TP +.B \-lircconf\ configfile +specifies a configfile for LIRC (see http://www.lirc.org) if you don't like the default ~/.lircrc +.TP +.B \-v +enable verbose output (more -v means more verbose) +.TP +.B \-quiet +display less output, status messages. +.TP +.B \-benchmark +used in combination with -nosound and -vo null for benchmarking. +.TP +.B \-skin skin directory +load skin from this directory (WITHOUT path name!). For example '-skin fittyfene' tries these : + + /usr/local/share/mplayer/Skin/fittyfene + ~/.mplayer/Skin/fittyfene +.TP +.B \-aspect ratio +set aspect ratio of movies. It's autodetected on MPEG files, and can't be +autodetected on AVI files. Examples: + + -aspect 4:3 or -aspect 1.3333 + -aspect 16:9 or -aspect 1.7777 + +(has -noaspect pair) +.TP +.B \-monitoraspect ratio +set aspect ratio of your screen. Examples: + + -monitoraspect 4:3 or 1.3333 + -monitoraspect 16:9 or 1.7777 + +.TP +.B \-playlist <file> +play files according to this filelist (1 file/row). +.TP +.B \-slave +This option switches on slave mode. This is intended for use +of MPlayer as a backend to other programs. Instead of intercepting keyboard +events, MPlayer will read simplistic command lines from its stdin. +See section +.B SLAVE MODE PROTOCOL +for the syntax. +.IP +.SH "ADVANCED OPTIONS" +.TP +.I NOTE +These options can help you solve your particular problem.. Also, see the +documentation ! +.TP +.B \-vc <name> +force usage of a specific video codec, according to its name in codecs.conf, +for example : + + -vc divx use VFW DivX codec + -vc divxds use DirectShow DivX codec + -vc ffdivx use libavcodec's DivX codec + -vc ffmpeg12 use libavcodec's MPEG1/2 codec + -vc divx4 use ProjectMayo's DivX codec + +See -vc help for FULL list ! +.TP +.B \-ac <name> +force usage of a specific audio codec, according to its name in codecs.conf, +for example : + + -ac mp3 use libmp3 MP3 codec + -ac mp3acm use l3codeca.acm MP3 codec + -ac ac3 use AC3 codec + -ac hwac3 enable Hardware AC3 passthrough + (see documentation) + -ac vorbis use libvorbis + -ac ffmp3 use ffmpeg's MP3 decoder (SLOW) + +See -ac help for FULL list ! +.TP +.B \-vfm <1-12> +force usage of a specific codec FAMILY, and FALLBACK to default if failed. +For example: + + -vfm 2 use VFW (Win32) codecs + -vfm 3 use OpenDivX/DivX4 codec (YV12) + (same as -vc odivx but fallback) + -vfm 4 use DirectShow (Win32) codecs + -vfm 5 use libavcodec codecs + -vfm 7 use DivX4 codec (YUY2) + (same as -vc divx4 but fallback) + -vfm 10 use XAnim codecs + +See -vc help for FULL list ! + +NOTE : if libdivxdecore support was compiled in, then type 3 and 7 now contains +just the same DivX4 codec, but different APIs to reach it. For difference +between them and when to use which, check the DivX4 section in the +documentation. +.TP +.B \-afm <1-12> +force usage of a specific audio format. For example: + + -afm 1 use libmp3 (mp2/mp3, + but not mp1) + -afm 2 suppose raw PCM audio + -afm 3 use libac3 + -afm 4 use a matching Win32 codec + -afm 5 use aLaw/uLaw driver + -afm 10 use libvorbis + -afm 11 use ffmpeg's MP3 decoder (even mp1) + +See -ac help for FULL list ! +.TP +.B \-sb\ position +seek to byte position +.TP +.B \-ss\ time +seek to given time position. For example : + + -ss 56 + -ss 01:10:00 + +.TP +.B \-bpp\ depth +use different color depth than autodetect. Not all -vo drivers support +it (fbdev, dga2, svga, vesa). +.TP +.B \-abs\ bytes +sound card audio buffer size (in bytes, default: measuring) +.TP +.B \-delay\ secs +audio delay in seconds (may be +/- float value) +.TP +.B \-nobps +don't use avg. byte/sec value for A-V sync (AVI) +.TP +.B \-aid\ id +select audio channel [MPG: 0-31 AVI: 1-99 ASF: 0-127 VOB: 128-...] +.TP +.B \-vid\ id +select video channel [MPG: 0-15 AVI: -- ] +.TP +.B \-fps\ value +force frame rate (if value is wrong in the header) +.TP +.B \-mc\ seconds/5frame +maximum sync correction per 5 frames (in seconds) +.TP +.B \-ni +force usage of non-interleaved AVI parser +.TP +.B \-include configfile +specify config file to be parsed after the default +.TP +.B \-z\ <0-8> +specifies compression level for PNG output + 0 : no compression + 8 : max compression +.TP +.B \-idx +rebuilds INDEX of the AVI. Useful with broken downloads, or badly +created AVIs. +.TP +.B \-forceidx +force rebuilding of INDEX. Useful for testing, or AVIs with bad +indexes. +.TP +.B \-nodshow +disables usage of DirectShow video codecs +.TP +.B \-noxv +disable XVideo hardware acceleration (with SDL only!) +.TP +.B \-forcexv +force using XVideo (SDL!) +.TP +.B \-dumpaudio +writes audio stream of the file to ./stream.dump (mostly usable +with mpeg/ac3) +.TP +.B \-dumpstream +dumps the file to ./stream.dump . Useful for example +when ripping from DVD. +.TP +.B \-noframedrop +no frame dropping : every frame is played, audio and video may be out of +sync (default) +.TP +.B \-framedrop +frame dropping : decode all frames, video may skip +.TP +.B \-nodouble +disable doublebuffering (default). Currently this is only honoured by the Xv and the DGA driver. +With the DGA driver this also disables OSD support but yields some speed gain. +.TP +.B \-double +enable doublebuffering. Currently this is only honoured by the Xv and the DGA driver. +.TP +.B \-dvdkey key +key to decrypt stream encrypted with CSS. For example : -dvdkey F169072699 +(this is NOT for DVD playing! For DVD use the -dvd option!) +.TP +.B \-stereo mode +select type of MP2/MP3 stereo output. + + Stereo 0 + Left channel 1 + Right channel 2 +.TP +.B \-channels n +select number of audio output channels to be used + + Stereo 2 + Surround 4 + Full 5.1 6 + +Currently this option is only honoured for AC3 audio. +.TP +.B \-srate Hz +specifies Hz to playback audio on. Has effect on playback speed! +.TP +.B \-config configfile +specifies where to search for config file +.TP +.B \-display name +specify the hostname and display number of the X server you want +to display on. For example : -display xtest.localdomain:0 +.TP +.B \-unicode +tells MPlayer to handle the subtitle file as UNICODE. +Contrary: -nounicode +.TP +.B \-utf8 +tells MPlayer to handle the subtitle file as UTF8. +.TP +.B \-fsmode\ mode +This option workarounds some problems when using specific windowmanagers and +fullscreen mode. If you experience fullscreen problems, try changing this +value between 0 and 7. + + -fsmode 0 new method + -fsmode 1 ICCCWM patch + (for KDE2/icewm) + -fsmode 2 old method + -fsmode 3 ICCCWM patch + plus Motif method +.TP +.B \-frames\ number +MPlayer plays <number> frames, then quits. +.TP +.B \-fb\ device +Specifies the framebuffer device to use. By default it uses /dev/fb0 . +Only valid for the fbdev driver. +.TP +.B \-fbmode\ modename +Change videomode to the one that is labelled as <modename> in /etc/fb.modes . +Only valid for the fbdev driver. +.TP +.I NOTE +VESA framebuffer doesn't support mode changing. +.TP +.B \-fbmodeconfig\ filename +Use this config file instead of the default /etc/fb.modes . +Only valid for the fbdev driver. +.TP +.B \-subcp\ codepage +If your system supports iconv(3), you can use this option to +specify codepage of the subtitle. Examples: + + -subcp latin2 + -subcp cp1250 + +.TP +.B \-dumpmpsub +Convert the given subtitle (specified with the -sub switch) to MPlayer's +subtitle format, MPsub. Dumps a dump.mpsub file to current directory. +.TP +.B \-screenw\ pixels +If you use an output driver which can't know the resolution of the screen +(mga/fbdev/x11 and/or TVout) this is where you can specify the horizontal +resolution. +.TP +.B \-screenh\ pixels +If you use an output driver which can't know the resolution of the screen +(mga/fbdev/x11 and/or TVout) this is where you can specify the vertical +resolution. +.TP +.B \-cache\ kbytes +This option specifies how much memory to use when precaching a file/URL . +Especially useful on slow media. Default is off. +.IP +.SH "ALPHA/BETA CODE" +.TP +.I NOTE +These are included in this manpage just for completeness! These may or may NOT +work! If you don't know what are these, you DON'T need these! In either case, +double-check the documentation ! +.TP +.B \-br\ rate +used with '-vo odivx' . +Specifies the bitrate to encode OpenDivx at +(in bits! e.g: 780000). +.TP +.I NOTE +You CAN'T encode sound, only video right now! Don't ask for it, +it's on the TODO list. +.TP +.B \-encode\ file +used with '-vo odivx' . +Specifies the output OpenDivX file. Won't overwrite. +.TP +.B \-dumpvideo +dump video stream to ./stream.dump (only with MPEG-PS) (not very usable) +.IP +.SH KEYBOARD CONTROL +.TP +.I NOTE +These keys may/may not work, depending on your video output driver. +.TP + <- or -> seek backward/forward 10 seconds + +up or down seek backward/forward 1 minute + +pgup/pgdown seek backward/forward 10 minutes + +p or SPACE pause movie (press any key) + +q or ESC stop playing and quit program + ++ or - adjust audio delay by +/- 0.1 second + +/ or * decrease/increase volume + +o toggle OSD: none / seek / seek+timer + +m toggle using master/pcm volume + +z or x adjust subtitle delay by +/- 0.1 second + +(the following keys are valid only when using DirectShow DivX codec, or +the DivX4 codec with -vc divx4) + +1 or 2 adjust contrast + +3 or 4 adjust brightness + +5 or 6 adjust hue + +7 or 8 adjust saturation + +.IP +.SH SLAVE MODE PROTOCOL +If the -slave switch is given, playback is controlled by a +line-based protocol with the following tokens: +.TP + stop pause playback + +play resume playback + +seek <NUM> continue at second NUM + +skip <NUM> skip NUM seconds (may be negative) + +quit exit mplayer + +.IP +.SH FILES AND DIRECTORIES +.TP +.I CONFIG FILES +Settings are stored system-wide in the /etc/mplayer.conf file, +and per-user in $HOME/.mplayer/config. The directory +$HOME/.mplayer and the 'config' are created if doesn't exist. +.TP +.I FONTS +Fonts are searched in $HOME/.mplayer/font. There must be a font.desc +file, and files with .RAW extension. +.TP +.I SUBTITLE FILES +MPlayer currently supports 9 subtitle formats : MicroDVD, SubRip, unnamed, +SAMI (smi), vplayer, RealMedia RT, ssa (Sub Station Alpha), AQT, and our own: MPsub. +Sub files are searched in this priority : (for example /mnt/cdrom/movie.avi) + /mnt/cdrom/movie.sub + (utf/UTF/sub/SUB/srt/SRT/smi/SMI/rt/RT/txt/TXT/ssa/SSA) + $HOME/.mplayer/sub/movie.sub + (utf/UTF/sub/SUB/srt/SRT/smi/SMI/rt/RT/txt/TXT/ssa/SSA) + $HOME/.mplayer/default.sub +.IP +.SH "EXAMPLES" +.B Quickstart DVD playing +mplayer -dvd 1 +.TP +.B Multiangle DVD playing +mplayer -dvd 1 -dvdangle 2 +.TP +.B Playing from a different DVD device +mplayer -dvd 1 /dev/dvd2 +.TP +.B Stream from HTTP +mplayer http://mplayer.hq/example.avi +.TP +.B Convert subtitle to MPsub (to ./dump.mpsub) +mplayer dummy.avi -sub source.sub -dumpmpsub +.LP +.SH BUGS +Probably. Check the documentation. + +Bugreports should be addressed to the MPlayer-users mailing list +(mplayer-users@mplayerhq.hu) ! If you want to submit a bugreport +(which we love to receive!), please double-check the bugreports.html, and +tell us all that we need to know to identify your problem. + +.LP +.SH AUTHORS +Check documentation ! + +MPlayer is (C) 2000-2001 +.I Arpad Gereoffy <arpi@thot.banki.hu> + +This manpage is written and maintained by +.I Gabucino . +.LP +.SH STANDARD DISCLAIMER +Use only at your own risk! There may be errors and inaccuracies that could +be damaging to your system or your eye. Proceed with caution, and although +this is highly unlikely, the author doesn't take any responsibility for that! +.\" end of file |