Remove '(pass 1/2)' from some lavcopts. These options really worked on

all passes, and most options that worked on all passes weren't marked
at all. It's valid to assume that any option not marked otherwise will
work on all passes.


git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@26763 b3059339-0415-0410-9bf9-f77b7e298cf2

1 files changed, 15 insertions, 15 deletions

diff --git a/DOCS/man/en/mplayer.1 b/DOCS/man/en/mplayer.1
index 0b24510041..7a672c8016 100644
--- a/DOCS/man/en/mplayer.1
+++ b/DOCS/man/en/mplayer.1
@@ -7724,7 +7724,7 @@ Windows Media Video, version 2 (AKA WMV8)
 .
 .TP
 .B vqmin=<1\-31>
-minimum quantizer (pass 1/2)
+minimum quantizer
 .RSs
 .IPs 1
 Not recommended (much larger file, little quality difference and weird side
@@ -7782,7 +7782,7 @@ effect.
 .
 .TP
 .B vqmax=<1\-31>
-Maximum quantizer (pass 1/2), 10\-31 should be a sane range (default: 31).
+Maximum quantizer, 10\-31 should be a sane range (default: 31).
 .
 .TP
 .B mbqmin=<1\-31>
@@ -7795,7 +7795,7 @@ obsolete, use vqmax
 .TP
 .B vqdiff=<1\-31>
 maximum quantizer difference between consecutive I- or P-frames
-(pass 1/2) (default: 3)
+(default: 3)
 .
 .TP
 .B vmax_b_frames=<0\-4>
@@ -8062,7 +8062,7 @@ always on.
 .
 .TP
 .B vbitrate=<value>
-Specify bitrate (pass 1/2) (default: 800).
+Specify bitrate (default: 800).
 .br
 .I WARNING:
 1kbit = 1000 bits
@@ -8088,17 +8088,17 @@ be problems if vrc_(min|max)rate is used.
 .
 .TP
 .B vrc_maxrate=<value>
-maximum bitrate in kbit/\:sec (pass 1/2)
+maximum bitrate in kbit/\:sec
 (default: 0, unlimited)
 .
 .TP
 .B vrc_minrate=<value>
-minimum bitrate in kbit/\:sec (pass 1/2)
+minimum bitrate in kbit/\:sec
 (default: 0, unlimited)
 .
 .TP
 .B vrc_buf_size=<value>
-buffer size in kbit (pass 1/2).
+buffer size in kbit
 For MPEG-1/2 this also sets the vbv buffer size, use 327 for VCD,
 917 for SVCD and 1835 for DVD.
 .
@@ -8123,19 +8123,19 @@ with support for Xvid 1.1 or higher).
 .
 .TP
 .B vb_qfactor=<\-31.0\-31.0>
-quantizer factor between B- and non-B-frames (pass 1/2) (default: 1.25)
+quantizer factor between B- and non-B-frames (default: 1.25)
 .
 .TP
 .B vi_qfactor=<\-31.0\-31.0>
-quantizer factor between I- and non-I-frames (pass 1/2) (default: 0.8)
+quantizer factor between I- and non-I-frames (default: 0.8)
 .
 .TP
 .B vb_qoffset=<\-31.0\-31.0>
-quantizer offset between B- and non-B-frames (pass 1/2) (default: 1.25)
+quantizer offset between B- and non-B-frames (default: 1.25)
 .
 .TP
 .B vi_qoffset=<\-31.0\-31.0>
-(pass 1/2) (default: 0.0)
+(default: 0.0)
 .br
 if v{b|i}_qfactor > 0
 .br
@@ -8171,7 +8171,7 @@ the quantizer more over time (slower change).
 .
 .TP
 .B vqcomp=<0.0\-1.0>
-Quantizer compression, vrc_eq depends upon this (pass 1/2) (default: 0.5).
+Quantizer compression, vrc_eq depends upon this (default: 0.5).
 For instance, assuming the default rate control equation is used,
 if vqcomp=1.0, the ratecontrol allocates to each frame the number of bits
 needed to encode them all at the same QP.
@@ -8183,7 +8183,7 @@ Perceptual quality will be optimal somewhere in between these two extremes.
 .
 .TP
 .B vrc_eq=<equation>
-main ratecontrol equation (pass 1/2)
+main ratecontrol equation
 .RE
 .RSs
 .IPs "1\ \ \ \ "
@@ -8256,7 +8256,7 @@ is 1 if a==b, 0 otherwise
 .
 .TP
 .B vrc_override=<options>
-User specified quality for specific parts (ending, credits, ...) (pass 1/2).
+User specified quality for specific parts (ending, credits, ...).
 The options are <start-frame>, <end-frame>, <quality>[/<start-frame>,
 <end-frame>, <quality>[/...]]:
 .PD 0
@@ -8278,7 +8278,7 @@ initial buffer occupancy, as a fraction of vrc_buf_size (default: 0.9)
 .
 .TP
 .B vqsquish=<0|1>
-Specify how to keep the quantizer between qmin and qmax (pass 1/2).
+Specify how to keep the quantizer between qmin and qmax.
 .PD 0
 .RSs
 .IPs 0