this file is obsoleted by videodev_mjpeg.h

git-svn-id: svn://svn.mplayerhq.hu/mplayer/trunk@4671 b3059339-0415-0410-9bf9-f77b7e298cf2

1 files changed, 0 insertions, 372 deletions

diff --git a/libvo/zoran.h b/libvo/zoran.h
deleted file mode 100644
index 33ce8e5f3c..0000000000
--- a/libvo/zoran.h
+++ /dev/null
@@ -1,372 +0,0 @@
-/* 
-    zoran - Iomega Buz driver
-
-    Copyright (C) 1999 Rainer Johanni <Rainer@Johanni.de>
-
-   based on
-
-    zoran.0.0.3 Copyright (C) 1998 Dave Perks <dperks@ibm.net>
-
-   and
-
-    bttv - Bt848 frame grabber driver
-    Copyright (C) 1996,97 Ralph Metzler (rjkm@thp.uni-koeln.de)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-#ifndef _BUZ_H_
-#define _BUZ_H_
-
-#include <linux/config.h>
-
-#if LINUX_VERSION_CODE < 0x20212
-typedef struct wait_queue *wait_queue_head_t;
-#endif
-
-/* The Buz only supports a maximum width of 720, but some V4L
-   applications (e.g. xawtv are more happy with 768).
-   If XAWTV_HACK is defined, we try to fake a device with bigger width */
-
-//#define XAWTV_HACK
-
-//#ifdef XAWTV_HACK
-//#define   BUZ_MAX_WIDTH   768   /* never display more than 768 pixels */
-#define   BUZ_MAX_WIDTH   (zr->timing->Wa)
-//#else
-//#define   BUZ_MAX_WIDTH   720   /* never display more than 720 pixels */
-//#endif
-//#define   BUZ_MAX_HEIGHT  576   /* never display more than 576 rows */
-#define   BUZ_MAX_HEIGHT  (zr->timing->Ha)
-#define   BUZ_MIN_WIDTH    32	/* never display less than 32 pixels */
-#define   BUZ_MIN_HEIGHT   24	/* never display less than 24 rows */
-
-struct zoran_requestbuffers {
-	unsigned long count;	/* Number of buffers for MJPEG grabbing */
-	unsigned long size;	/* Size PER BUFFER in bytes */
-};
-
-struct zoran_sync {
-	unsigned long frame;	/* number of buffer that has been free'd */
-	unsigned long length;	/* number of code bytes in buffer (capture only) */
-	unsigned long seq;	/* frame sequence number */
-	struct timeval timestamp;	/* timestamp */
-};
-
-struct zoran_status {
-	int input;		/* Input channel, has to be set prior to BUZIOC_G_STATUS */
-	int signal;		/* Returned: 1 if valid video signal detected */
-	int norm;		/* Returned: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */
-	int color;		/* Returned: 1 if color signal detected */
-};
-
-struct zoran_params {
-
-	/* The following parameters can only be queried */
-
-	int major_version;	/* Major version number of driver */
-	int minor_version;	/* Minor version number of driver */
-
-	/* Main control parameters */
-
-	int input;		/* Input channel: 0 = Composite, 1 = S-VHS */
-	int norm;		/* Norm: VIDEO_MODE_PAL or VIDEO_MODE_NTSC */
-	int decimation;		/* decimation of captured video,
-				   enlargement of video played back.
-				   Valid values are 1, 2, 4 or 0.
-				   0 is a special value where the user
-				   has full control over video scaling */
-
-	/* The following parameters only have to be set if decimation==0,
-	   for other values of decimation they provide the data how the image is captured */
-
-	int HorDcm;		/* Horizontal decimation: 1, 2 or 4 */
-	int VerDcm;		/* Vertical decimation: 1 or 2 */
-	int TmpDcm;		/* Temporal decimation: 1 or 2,
-				   if TmpDcm==2 in capture every second frame is dropped,
-				   in playback every frame is played twice */
-	int field_per_buff;	/* Number of fields per buffer: 1 or 2 */
-	int img_x;		/* start of image in x direction */
-	int img_y;		/* start of image in y direction */
-	int img_width;		/* image width BEFORE decimation,
-				   must be a multiple of HorDcm*16 */
-	int img_height;		/* image height BEFORE decimation,
-				   must be a multiple of VerDcm*8 */
-
-	/* --- End of parameters for decimation==0 only --- */
-
-	/* JPEG control parameters */
-
-	int quality;		/* Measure for quality of compressed images.
-				   Scales linearly with the size of the compressed images.
-				   Must be beetween 0 and 100, 100 is a compression
-				   ratio of 1:4 */
-
-	int odd_even;		/* Which field should come first ??? */
-
-	int APPn;		/* Number of APP segment to be written, must be 0..15 */
-	int APP_len;		/* Length of data in JPEG APPn segment */
-	char APP_data[60];	/* Data in the JPEG APPn segment. */
-
-	int COM_len;		/* Length of data in JPEG COM segment */
-	char COM_data[60];	/* Data in JPEG COM segment */
-
-	unsigned long jpeg_markers;	/* Which markers should go into the JPEG output.
-					   Unless you exactly know what you do, leave them untouched.
-					   Inluding less markers will make the resulting code
-					   smaller, but there will be fewer aplications
-					   which can read it.
-					   The presence of the APP and COM marker is
-					   influenced by APP0_len and COM_len ONLY! */
-#define JPEG_MARKER_DHT (1<<3)	/* Define Huffman Tables */
-#define JPEG_MARKER_DQT (1<<4)	/* Define Quantization Tables */
-#define JPEG_MARKER_DRI (1<<5)	/* Define Restart Interval */
-#define JPEG_MARKER_COM (1<<6)	/* Comment segment */
-#define JPEG_MARKER_APP (1<<7)	/* App segment, driver will allways use APP0 */
-
-	int VFIFO_FB;		/* Flag for enabling Video Fifo Feedback.
-				   If this flag is turned on and JPEG decompressing
-				   is going to the screen, the decompress process
-				   is stopped every time the Video Fifo is full.
-				   This enables a smooth decompress to the screen
-				   but the video output signal will get scrambled */
-
-	/* Misc */
-
-	char reserved[312];	/* Makes 512 bytes for this structure */
-};
-
-/*
-Private IOCTL to set up for displaying MJPEG
-*/
-#define BUZIOC_G_PARAMS       _IOR ('v', BASE_VIDIOCPRIVATE+0,  struct zoran_params)
-#define BUZIOC_S_PARAMS       _IOWR('v', BASE_VIDIOCPRIVATE+1,  struct zoran_params)
-#define BUZIOC_REQBUFS        _IOWR('v', BASE_VIDIOCPRIVATE+2,  struct zoran_requestbuffers)
-#define BUZIOC_QBUF_CAPT      _IOW ('v', BASE_VIDIOCPRIVATE+3,  int)
-#define BUZIOC_QBUF_PLAY      _IOW ('v', BASE_VIDIOCPRIVATE+4,  int)
-#define BUZIOC_SYNC           _IOR ('v', BASE_VIDIOCPRIVATE+5,  struct zoran_sync)
-#define BUZIOC_G_STATUS       _IOWR('v', BASE_VIDIOCPRIVATE+6,  struct zoran_status)
-
-
-#ifdef __KERNEL__
-
-#define BUZ_NUM_STAT_COM    4
-#define BUZ_MASK_STAT_COM   3
-
-#define BUZ_MAX_FRAME     256	/* Must be a power of 2 */
-#define BUZ_MASK_FRAME    255	/* Must be BUZ_MAX_FRAME-1 */
-
-#if VIDEO_MAX_FRAME <= 32
-#   define   V4L_MAX_FRAME   32
-#elif VIDEO_MAX_FRAME <= 64
-#   define   V4L_MAX_FRAME   64
-#else
-#   error   "Too many video frame buffers to handle"
-#endif
-#define   V4L_MASK_FRAME   (V4L_MAX_FRAME - 1)
-
-
-#include "zr36057.h"
-
-enum card_type {
-        UNKNOWN = 0,
-        DC10,
-        DC10plus,
-        LML33,
-        BUZ
-};
-
-enum zoran_codec_mode {
-	BUZ_MODE_IDLE,		/* nothing going on */
-	BUZ_MODE_MOTION_COMPRESS,	/* grabbing frames */
-	BUZ_MODE_MOTION_DECOMPRESS,	/* playing frames */
-	BUZ_MODE_STILL_COMPRESS,	/* still frame conversion */
-	BUZ_MODE_STILL_DECOMPRESS	/* still frame conversion */
-};
-
-enum zoran_buffer_state {
-	BUZ_STATE_USER,		/* buffer is owned by application */
-	BUZ_STATE_PEND,		/* buffer is queued in pend[] ready to feed to I/O */
-	BUZ_STATE_DMA,		/* buffer is queued in dma[] for I/O */
-	BUZ_STATE_DONE		/* buffer is ready to return to application */
-};
-
-struct zoran_gbuffer {
-	u32 *frag_tab;		/* addresses of frag table */
-	u32 frag_tab_bus;	/* same value cached to save time in ISR */
-	enum zoran_buffer_state state;	/* non-zero if corresponding buffer is in use in grab queue */
-	struct zoran_sync bs;	/* DONE: info to return to application */
-};
-
-struct v4l_gbuffer {
-	char *fbuffer;			/* virtual  address of frame buffer */
-	unsigned long fbuffer_phys;	/* physical address of frame buffer */
-	unsigned long fbuffer_bus;	/* bus      address of frame buffer */
-	enum zoran_buffer_state state;	/* state: unused/pending/done */
-};
-
-struct tvnorm {
-	u16 Wt, Wa, HStart, HSyncStart, Ht, Ha, VStart;
-};
-
-struct zoran {
-	struct video_device video_dev;
-	struct i2c_bus i2c;
-
-	int initialized;		/* flag if zoran has been correctly initalized */
-	int user;			/* number of current users (0 or 1) */
-        enum card_type card;
-        struct tvnorm *timing;
-
-	unsigned short id;		/* number of this device */
-	char name[32];			/* name of this device */
-	struct pci_dev *pci_dev;	/* PCI device */
-	unsigned char revision;		/* revision of zr36057 */
-	unsigned int zr36057_adr;	/* bus address of IO mem returned by PCI BIOS */
-	unsigned char *zr36057_mem;	/* pointer to mapped IO memory */
-
-	int map_mjpeg_buffers;		/* Flag which bufferset will map by next mmap() */
-
-	spinlock_t lock;		/* Spinlock irq and hardware */
-	struct semaphore sem;		/* Guard parallel ioctls and mmap */
-
-	/* Video for Linux parameters */
-
-	struct video_picture picture;	/* Current picture params */
-	struct video_buffer buffer;	/* Current buffer params */
-	struct video_window window;	/* Current window params */
-	int buffer_set, window_set;	/* Flags if the above structures are set */
-	int video_interlace;		/* Image on screen is interlaced */
-
-	u32 *overlay_mask;
-        wait_queue_head_t v4l_capq;
-
-	int v4l_overlay_active;		/* Overlay grab is activated */
-	int v4l_memgrab_active;		/* Memory grab is activated */
-
-	int v4l_grab_frame;		/* Frame number being currently grabbed */
-#define NO_GRAB_ACTIVE (-1)
-	int v4l_grab_seq;		/* Number of frames grabbed */
-	int gwidth;			/* Width of current memory capture */
-	int gheight;			/* Height of current memory capture */
-	int gformat;			/* Format of ... */
-	int gbpl;			/* byte per line of ... */
-
-	/* V4L grab queue of frames pending */
-
-	unsigned v4l_pend_head;
-	unsigned v4l_pend_tail;
-	int v4l_pend[V4L_MAX_FRAME];
-
-	struct v4l_gbuffer v4l_gbuf[VIDEO_MAX_FRAME];	/* V4L   buffers' info */
-
-	/* Buz MJPEG parameters */
-
-	unsigned long jpg_nbufs;	/* Number of buffers */
-	unsigned long jpg_bufsize;	/* Size of mjpeg buffers in bytes */
-	int jpg_buffers_allocated;	/* Flag if buffers are allocated  */
-	int need_contiguous;	/* Flag if contiguous buffers are needed */
-
-	enum zoran_codec_mode codec_mode;	/* status of codec */
-	struct zoran_params params;	/* structure with a lot of things to play with */
-
-	wait_queue_head_t jpg_capq;	/* wait here for grab to finish */
-
-	/* grab queue counts/indices, mask with BUZ_MASK_STAT_COM before using as index */
-	/* (dma_head - dma_tail) is number active in DMA, must be <= BUZ_NUM_STAT_COM */
-	/* (value & BUZ_MASK_STAT_COM) corresponds to index in stat_com table */
-	unsigned long jpg_que_head;	/* Index where to put next buffer which is queued */
-	unsigned long jpg_dma_head;	/* Index of next buffer which goes into stat_com  */
-	unsigned long jpg_dma_tail;	/* Index of last buffer in stat_com               */
-	unsigned long jpg_que_tail;	/* Index of last buffer in queue                  */
-	unsigned long jpg_seq_num;	/* count of frames since grab/play started        */
-	unsigned long jpg_err_seq;	/* last seq_num before error                      */
-	unsigned long jpg_err_shift;
-	unsigned long jpg_queued_num;	/* count of frames queued since grab/play started */
-
-	/* zr36057's code buffer table */
-	u32 *stat_com;			/* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */
-
-	/* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */
-	int jpg_pend[BUZ_MAX_FRAME];
-
-	/* array indexed by frame number */
-	struct zoran_gbuffer jpg_gbuf[BUZ_MAX_FRAME];	/* MJPEG buffers' info */
-
-	/* Additional stuff for testing */
-	struct proc_dir_entry *zoran_proc;
-
-	int testing;
-	int jpeg_error;
-	int intr_counter_GIRQ1;
-	int intr_counter_GIRQ0;
-	int intr_counter_CodRepIRQ;
-	int intr_counter_JPEGRepIRQ;
-	int field_counter;
-	int IRQ1_in;
-	int IRQ1_out;
-	int JPEG_in;
-	int JPEG_out;
-	int JPEG_0;
-	int JPEG_1;
-	int END_event_missed;
-	int JPEG_missed;
-	int JPEG_error;
-	int num_errors;
-	int JPEG_max_missed;
-	int JPEG_min_missed;
-
-	u32 last_isr;
-	unsigned long frame_num;
-
-	wait_queue_head_t test_q;
-};
-
-#endif
-
-/*The following should be done in more portable way. It depends on define
-  of _ALPHA_BUZ in the Makefile.*/
-
-#ifdef _ALPHA_BUZ
-#define btwrite(dat,adr)    writel((dat),(char *) (zr->zr36057_adr+(adr)))
-#define btread(adr)         readl(zr->zr36057_adr+(adr))
-#else
-#define btwrite(dat,adr)    writel((dat), (char *) (zr->zr36057_mem+(adr)))
-#define btread(adr)         readl(zr->zr36057_mem+(adr))
-#endif
-
-#define btand(dat,adr)      btwrite((dat) & btread(adr), adr)
-#define btor(dat,adr)       btwrite((dat) | btread(adr), adr)
-#define btaor(dat,mask,adr) btwrite((dat) | ((mask) & btread(adr)), adr)
-
-#define I2C_TSA5522        0xc2
-#define I2C_TDA9850        0xb6
-#define I2C_HAUPEE         0xa0
-#define I2C_STBEE          0xae
-#define   I2C_SAA7111        0x48
-#define   I2C_SAA7110        0x9c
-#define   I2C_SAA7185        0x88
-//#define   I2C_ADV7175        0xd4
-#define   I2C_ADV7175        0x54
-
-#define TDA9850_CON1       0x04
-#define TDA9850_CON2       0x05
-#define TDA9850_CON3       0x06
-#define TDA9850_CON4       0x07
-#define TDA9850_ALI1       0x08
-#define TDA9850_ALI2       0x09
-#define TDA9850_ALI3       0x0a
-
-#endif